close

Privacy guaranteed - Your email is not shared with anyone.

Seal1 CLP Plus Vs. FrogLube...

Discussion in 'General Glocking' started by tango44, Oct 30, 2012.


  1. tango44

    tango44
    Expand Collapse

    Joined:
    Jun 16, 2005
    5,089
    32
    Location:
    Miami Florida
    Anyone that have use both?
    Which ones is better for my Glock's?
    Seal1 is cheaper than FrogLube, FL works fine on my Glock's!
    Please share your experince or comments.
    Thank you.


    http://www.seal1.net/
     
  2. robhic

    robhic
    Expand Collapse
    WOLVERINE!!!!
    Platinum Member

    Joined:
    Jun 28, 2011
    4,058
    1,422
    Location:
    Louisiana
    Not familiar with Seal 1 but, honestly, I do believe ANY decent lubricant will work if used properly. I, personally, use EEZOX which is a dry lube/cleaner/rust preventative. It dries dry (hence it's name :supergrin:) and won't attract dirt or residue, etc.

    Your Glock requires minimal lubrication as the manual supplied shows. It is measured in drops! I use EEZOX (http://www.eezox.com/) for the barrel inside and out, connector / trigger bar interface and firing pin tab (at back of FP) and the top of the trigger bar where that tab rubs.

    I then use a tiny drop of grease at the slide rails (both sides), install the slide, lock it back and then two more TINY drops of grease towards the back end of the slide rails.