close

Privacy guaranteed - Your email is not shared with anyone.

Reduced recoil stock replacement for S&W Model 3000 shotgun

Discussion in 'Tactical Shotguns' started by GACajunGlocker, Jan 9, 2011.


  1. GACajunGlocker

    GACajunGlocker
    Expand Collapse

    Joined:
    Oct 26, 2010
    105
    0
    Location:
    Georgia
    I bought a used S&W Model 3000 shotgun, 18.5" barrel. It has a mag extender, holds 6 in the mag. It has a recoil pad on the end of the wood stock but the recoil is still a bit much. I'd like to remove the wood stock replace it with a reduced recoil version. I've looked at Knox and Hogue options but could not tell for sure if they would work on the S&W Model 3000.

    This particular shotgun(S&W 3000) is supposed to be a clone of the Rem 870 or so I thought. I bought a TacStar side saddle for the 870 in hopes that it would work. The two screw holes in the TacStar saddle match the locations of the trigger assembly pins in my Rem. 870 but the size of the screws supplied are a little larger in diameter than the pins in the trigger assembly in the S&W 3000.

    All that to say that I don't know if a stock replacement for the Rem 870 will work on S&W 3000.

    Any one know of reduced recoil stock options for the S&W Model 3000? If so I'd appreciate some options.

    Thanks.
     
    #1 GACajunGlocker, Jan 9, 2011
    Last edited: Jan 9, 2011
  2. GoBow

    GoBow
    Expand Collapse

    Joined:
    Feb 8, 2008
    141
    1
    Location:
    Delaware
    An 870 stock should fit the receiver, the trigger housing cutout at the grip may have an open gap. Don't know anything about the stocks you mentioned.

    I have a S&W 3000 for HD, but prefer to leave it as is. There's not alot of spare parts available for it if something breaks. Trick out an 870 if that's what you want. Best of luck!
     

  3. WiskyT

    WiskyT
    Expand Collapse
    Malcontent

    Joined:
    Jun 12, 2002
    11,682
    1
    Location:
    North Carolina
    Unless you have some kind of injury, reduced recoil buckshot should be shootable. The Remington 8 pellet 00 buck should be the lightest, though I haven't tried it.
     
  4. Victoriagotagun

    Victoriagotagun
    Expand Collapse

    Joined:
    Mar 5, 2007
    1,668
    0
    Location:
    California
    You could try to replace the recoil pad with a Limbsaver or one of their slip on recoil pads.

    Combine that with low-recoil loads and you should be good.
     
  5. GACajunGlocker

    GACajunGlocker
    Expand Collapse

    Joined:
    Oct 26, 2010
    105
    0
    Location:
    Georgia
    Haven't heard of the Limbsaver option...let me investigate that. I've been shooting regular Super X 9 pellet 00 buckshot....who makes the reduced recoil? I've also been reading about some shot that holds its pattern a little tighter. Is there a shell that is reduced recoil and has a tighter pattern in 00?

    Thanks.