close

Privacy guaranteed - Your email is not shared with anyone.

Question for 1911 fanatics.

Discussion in 'Band of Glockers' started by vega, Sep 1, 2007.


  1. vega

    vega
    Expand Collapse

    Joined:
    Sep 29, 2001
    2,799
    0
    Location:
    SoCal
  2. mtho

    mtho
    Expand Collapse

    Joined:
    Nov 18, 2005
    2,853
    0
    it looks like an officers slide,shorter than a commander size.
     

  3. isuzu

    isuzu
    Expand Collapse

    Joined:
    Jul 3, 2005
    4,072
    0
    Location:
    North America
    You have to cut the standard dustcover, though. Minor fitting would be required. What my gunsmith does is to lube the rails and use a plastic, non marking mallet to tap the slide into and out of the frame. It's a time-consuming process, but you'll end up with a smooth-gliding slide.

    Try www.centerfiresystems.com. They have good prices on complete RIA pistols, as well as Armscor shotguns and revolvers.
     
  4. vega

    vega
    Expand Collapse

    Joined:
    Sep 29, 2001
    2,799
    0
    Location:
    SoCal
    Thanks for the replies.

    I always avoid importing FA here in CA. FFL will charge you arm(s) and leg(s). And some dealers are hesistant to ship FA even if it's CA approve.
     
  5. Mang Danny

    Mang Danny
    Expand Collapse

    Joined:
    Jan 11, 2005
    470
    0
    Sayang naman ang frame mo kung tatabasin mo sa dust cover area. Isa pa, medyo iba ang position nang slide stop hole sa govt. at commander frame. Sa 1911Forum maraming die hard fanatics sa 1911.
     
  6. vega

    vega
    Expand Collapse

    Joined:
    Sep 29, 2001
    2,799
    0
    Location:
    SoCal
    So true, kaya pass na lang muna. Gusto ko lang magkaroon ng PH made 1911. Mayroon sa Turner's pero wala pang budget para sa bago.
     
  7. saki1611

    saki1611
    Expand Collapse
    BOG's #1611

    Joined:
    Sep 16, 2006
    1,284
    0
    Location:
    Philippines
    i think it's ok to fit the commander slide and even an officer's without cutting the dust cover. aside for additional weight in front, it will look good. commander and standard size frames have the same specs with their holes, except with the dust cover.
     
  8. royal glockster

    royal glockster
    Expand Collapse

    Joined:
    Mar 4, 2005
    588
    0
    Location:
    Pilipinas kong mahal
    sir vega, it's an RIA officer slide 3.25". I bought one from romram (also a BoG member) and had it fitted to my standard frame. However, col. bayang cut the slide by .25" coz my armscor officer barrel is only 3.0". I had the blade rear sight changed to novak style sight and the stick-on front sight to dove-tailed sight. Here's the pics..

    [​IMG]
    officer slide to standad frame (actually it qualifies for defender model na coz it's a 3-inch barrel)
     
  9. vega

    vega
    Expand Collapse

    Joined:
    Sep 29, 2001
    2,799
    0
    Location:
    SoCal
    rg - Thanks for the feedback and that's a nice pistol. To have it gunsmithed here beats the purpose of buying cheap slide so I'll pass. I would want drop in slide.