close

Privacy guaranteed - Your email is not shared with anyone.

.Mil pulled bullets and powders, what's the scoop?

Discussion in 'Reloading' started by Hogpauls, Nov 4, 2010.

  1. Hogpauls

    Hogpauls

    Joined:
    Nov 6, 2009
    Messages:
    854
    Likes Received:
    0
    Location:
    Idaho
    Found some .mil pulled SS109 62 gr. FMJBT bullets for a decent deal, anybody use these? Do the machine marks from pulling affect accuracy?

    What about WC-844 pull down? Never heard of pull down powder being available for resale. If you have experience please chime in and educate me.
     
  2. 8th SPS USAF

    8th SPS USAF

    Joined:
    Apr 28, 2007
    Messages:
    531
    Likes Received:
    1
    Location:
    Indiana
    About 20 years ago we bought 30 cal bullet tips from pulled bullets.
    Also some military powder-I do not remember the number. The powder
    loading was to be done with a 10% less than BLC lot #2. Worked great
    for 308/30-06 Never a match loading, but hitting steel plates at 100+
    yards was all we needed. Good Luck

    8th
     

  3. GlockSupremacy

    GlockSupremacy Recycle Kids!

    Joined:
    Feb 14, 2005
    Messages:
    496
    Likes Received:
    0
    Location:
    MN
    I am interested in the good deal on powder and bullets if you wouldn't mind to pm me that info.

    I have not personally used pull down powder, but have used pulled bullets and accuracy of the bullets was fine for combat accuracy and inside 100yards.
     
  4. Hogpauls

    Hogpauls

    Joined:
    Nov 6, 2009
    Messages:
    854
    Likes Received:
    0
    Location:
    Idaho
  5. Steve 48

    Steve 48

    Joined:
    Apr 19, 2006
    Messages:
    52
    Likes Received:
    0
    Location:
    St. John, Kansas
    I have some class A 147 gr 30 cal bullets and they do fine for plinking.