close

Privacy guaranteed - Your email is not shared with anyone.

M&P Trigger comparison video

Discussion in 'General Firearms Forum' started by Vultite, Sep 24, 2012.

  1. Vultite

    Vultite

    Joined:
    Dec 14, 2009
    Messages:
    58
    Likes Received:
    0
    Location:
    Tampa bay area
    Hey guys, for anyone with a M&P that feels like the trigger is inadequate...I made a video comparing the stock trigger of a M&P 9C vs. a M&P spec ops with Apex sear and striker block. I used a Lyman trigger pull gauge to measure the results and tried my best to show difference in trigger rest. Hope you guys like it, this company is started to slowly branch out into other brands like Glock, Sig ect.

    [ame="http://www.youtube.com/watch?v=1R0EOChsdMI"]http://www.youtube.com/watch?v=1R0EOChsdMI[/ame]
     
    Last edited: Sep 24, 2012
  2. nipperwolf

    nipperwolf

    Joined:
    Oct 3, 2002
    Messages:
    3,117
    Likes Received:
    71
    Wouldn't it be easier to do that without magazines inserted?
     

  3. Vultite

    Vultite

    Joined:
    Dec 14, 2009
    Messages:
    58
    Likes Received:
    0
    Location:
    Tampa bay area
    Well, for the M&P spec ops yes, because it doesn't have a mag safety...but the M&P 9C cannot fire unless the mag is in...which sucks lol.
     
    Last edited: Sep 24, 2012
  4. Comedian

    Comedian

    Joined:
    Aug 3, 2010
    Messages:
    967
    Likes Received:
    3
    Good video. I didn't realize how long the reset was on a stock M&P trigger. Thanks.
     
  5. M&P Shooter

    M&P Shooter Metal Member

    Joined:
    Jul 19, 2009
    Messages:
    10,639
    Likes Received:
    1
    Location:
    Phila, PA
    Mag safety removes very easy and pin slack can be filled with small spring from Home Depot. I have done this on 2 M&P's and spring pack cost $2.99 and you get 20 springs
     
  6. Vultite

    Vultite

    Joined:
    Dec 14, 2009
    Messages:
    58
    Likes Received:
    0
    Location:
    Tampa bay area
    Well then, guess I know what I am doing next :cool:
     
  7. M&P Shooter

    M&P Shooter Metal Member

    Joined:
    Jul 19, 2009
    Messages:
    10,639
    Likes Received:
    1
    Location:
    Phila, PA
    Apex hard sear
    [ame="http://www.youtube.com/watch?v=LAJKLHNRF04"]Hard Sear Install.wmv - YouTube[/ame]

    Remove mag safety(I got a pack of springs from Home Depot)
    [ame="http://www.youtube.com/watch?v=0MjTi0aJcc4"]How To Remove S&W M&P Magazine Disconnect Instructions - YouTube[/ame]

    Apex Safety plunger(I did this by laying the slide on a roll of tap and used a brass punch.
    [ame="http://www.youtube.com/watch?v=kEaVMxkp8PM"]USB Install - YouTube[/ame]
     
  8. Vultite

    Vultite

    Joined:
    Dec 14, 2009
    Messages:
    58
    Likes Received:
    0
    Location:
    Tampa bay area
    Thanks for the vid links! Do you think this would work as a more "drop in" replacement? http://www.midwayusa.com/product/54...-m-and-p-compact-9mm-luger-357-sig-40-s-and-w
     
  9. M&P Shooter

    M&P Shooter Metal Member

    Joined:
    Jul 19, 2009
    Messages:
    10,639
    Likes Received:
    1
    Location:
    Phila, PA
    You can buy a new sear housing but why when you have to remove sear housing to install Apex hard sear, you just don't put the small safety lever back in and replace spring with a slightly larger one to tack up slack from removing safety lever.
     
  10. Vultite

    Vultite

    Joined:
    Dec 14, 2009
    Messages:
    58
    Likes Received:
    0
    Location:
    Tampa bay area
    Thanks for the info!