Privacy guaranteed - Your email is not shared with anyone.
Separate names with a comma.
Discussion in 'Reloading' started by glockaviator, Aug 2, 2010.
Just wondering if I'm doing it right?
Wanna kill these ads? We can help!
I am going to give it a 9. It appears to be well attached but it is canted a little to the side.
WOW. How did you do that? I am guessing you are ok, less a pair of jockies. I sure hope so at least.
Actually it's not me. This website has a lot of loading and firing mishaps photos.
I don't know why, but I sprayed beer all over my monitor when I saw that picture. Through my nose.
Looks like a 650 primer tube kaboom?
What I find interesting is all the other holes near the embedded primer tube, did it happen more than once?
What makes you say it is a 650?
There is not a brass tip on the bottom of the tube.
If the tube was in the primer tube magazine? The primer tube would not have come out of the magazine.
After further exanimation of the tube. I would say it was on a single stage press or an RCBS Auto Priming Tool.
Look on the bottom of the tube where it is shiny. Either that was from the tube going in and out of the primer adaptor on the press, or it is shiny because it was protected from the blast by the primer adaptor.
What's the problem... all of mine look like that.
You only have one that looks like that. I have one that looks like that too. But I'm not the one who did it
It must be really depressing to know that you're not savvy enough about loading to even blow up a primer tube. Some explosives expert you are.
That is why I'm the expert. Grasshopper.
Come on UB, it looks like a sicks fifty you know how those things are always blowing up!
One thing we know for sure, it aint a Lee
You mean the 650 that runs circles around a LNL.
No stripper poles in the reloading room! Safety first!
I've got to ask. How DO you make a primer magazine kaboom like that?
I've seen several photos like this one with no real explanation as to what caused it.
I have an XL 650 that I've reloaded a couple thousand rounds of 9mm and about 1000 rounds of .45acp. I just can't see what would cause this, short of and deliberate attempt to make it happen.
So when I'm done with it, I should ust pop it off, and it goes into its proper storage location?