close

Privacy guaranteed - Your email is not shared with anyone.

Welcome to Glock Talk

Why should YOU join our Glock forum?

  • Converse with other Glock Enthusiasts
  • Learn about the latest hunting products
  • Becoming a member is FREE and EASY

If you consider yourself a beginner or an avid shooter, the Glock Talk community is your place to discuss self defense, concealed carry, reloading, target shooting, and all things Glock.

How to clean the print head on an Epson printer?

Discussion in 'Tech Talk' started by mrvmax, Jul 16, 2005.

  1. mrvmax

    mrvmax

    411
    0
    Nov 5, 2003
    houston
    I have an Epson 1000 ICS and I'm having probelms printing. The "clean head" function doesn't clean the head very well. Is there a way I can open up the printer and use alcohol or soemthing to clean the print head manually? I guess the heads are pluggin since not all colors are working.
     
  2. g29andy

    g29andy CLM

    2,700
    62
    Jan 28, 2001
    Too bad the search function is down, or you could read my old posts about Epsons.

    In a nutshell, you can't clean or replace the Epson printheads, per Epson service reps. I went through two, was able to send the first back before my original warranty ran out. The refurb they sent me had the same problem 6 months later, out of warranty. Epson reps told me "not to leave the printer on long, nor leave it off long." They could not be more specific than that.

    The last one I chucked into the garbage. I got two Canons. These have replaceable print heads, at least my two models (PIXMA IP4000 and PIXMA MP760). I know because you install the printhead yourself during setup. So far no problems with the Canons.

    If you google "clogged Epson" you'll find a lot about this problem. Some have had success removing the ink tanks, a few drops of alcohol in the ink tubes on the printhead, letting it sit overnight, then running a lot of cleaning cycles. Too much of a PITA for me.
     


  3. mrvmax

    mrvmax

    411
    0
    Nov 5, 2003
    houston
    Thanks. I finally just tried cleaning the print head with an alcohol soaked q-tip. It works pretty well now.
     
  4. g29andy

    g29andy CLM

    2,700
    62
    Jan 28, 2001
    Dang! Was it that simple? I kid. . .that didn't work for me.