close

Privacy guaranteed - Your email is not shared with anyone.

Help with first mod

Discussion in 'General Glocking' started by crash_gsxr750, Jan 19, 2013.


  1. crash_gsxr750

    crash_gsxr750
    Expand Collapse
    Arrows first

    Joined:
    Apr 22, 2008
    444
    0
    I ordered a ghost 5lb tactical (trigger overstop tab)

    I don't plan on doing any polishing of components, I'm planning on tuning the over travel stop and try it like this

    Is this a good plan, anyone else shooting the 5 lb connector this is my first attempt at modding my glocks

    I'm thinking of putting it in my G34 or G21 ( my G34 is standard 5.5 lb connector it's blue box)
     

    Wanna kill these ads? We can help!
  2. Bruce M

    Bruce M
    Expand Collapse

    Joined:
    Jan 3, 2010
    38,517
    9,214
    Location:
    S FL
    Safe guess this is not going into a defensive gun?
     

  3. 24601

    24601
    Expand Collapse

    Joined:
    Oct 7, 2012
    93
    0
    I run a 3.5 ghost rocket on all my glocks including my ccw... have fun grinding that tab... ensure you have the orange half back plate prior to starting this... it's a pita to grind, reassemble and test over and over , but once you get it set you'll never have to touch it again...


    Posted using Outdoor Hub Campfire
     
  4. 24601

    24601
    Expand Collapse

    Joined:
    Oct 7, 2012
    93
    0
    go to their site and find the Dave Spaulding cut... that's the angle I use...
     
  5. up1911fan

    up1911fan
    Expand Collapse

    Joined:
    Mar 12, 2009
    4,582
    2
    Location:
    Upper Michigan
    Take's a lot of fitting to get it right. I've come to prefer the dot connector in Gen4 format.
     
  6. crash_gsxr750

    crash_gsxr750
    Expand Collapse
    Arrows first

    Joined:
    Apr 22, 2008
    444
    0
    I was thinking about getting one of them by all mine at gen 3's I hear the dot connector is very nice though in the Gen 3 if you can find one to buy
     
  7. crash_gsxr750

    crash_gsxr750
    Expand Collapse
    Arrows first

    Joined:
    Apr 22, 2008
    444
    0
    Ok so I fitted trigger connector and when trigger is pulled back the striker fires and I've done a couple dozen or so dry fires

    I went to take slide off frame and now can't get the slide to come off

    Any ideas as to why slide won't come off yet the striker is released?