close

Privacy guaranteed - Your email is not shared with anyone.

guys part of the group buy mold on cast boolets

Discussion in '10mm Reloading Forum' started by ctious, Nov 5, 2012.


  1. ctious

    ctious
    Expand Collapse

    Joined:
    Dec 12, 2011
    554
    1
    Where are u going to start your work ups?

    I am thinking the 195 gr start at 9.4 800x and work up. Thinking I am going to end up around 10.4 or so.

    Anyone else got some test ideas?
     
  2. harley45

    harley45
    Expand Collapse

    Joined:
    Jan 27, 2003
    140
    0
    Blue dot at about 9.0 grains probably stop at 10.00
     

  3. MakeMineA10mm

    MakeMineA10mm
    Expand Collapse
    * * * *
    Millennium Member Lifetime Member

    Joined:
    Feb 13, 1999
    1,955
    4
    Location:
    Central Illinois
    Start at 10.5grs AA#9 and go from there.

    I'm thinking with the 185gr HP version, AA#9 is going to run out of space (over 100% load density) before reaching maximum pressures, so I'll have to switch to a powder more compact, probably 800x.

    Ctious, I'm guessing your right in the zone with your 800x loads, but go slow and careful when you get at, and certainly past, 10.0grs with the 195gr
     
    #3 MakeMineA10mm, Nov 12, 2012
    Last edited: Nov 12, 2012