close

Privacy guaranteed - Your email is not shared with anyone.

Glock 20 question

Discussion in 'General Glocking' started by markofva, Jul 27, 2011.

  1. markofva

    markofva

    Joined:
    Jul 21, 2011
    Messages:
    150
    Likes Received:
    0
    Location:
    Southwest Virginia
    Anyway to get the slide off of a Glock 20 if you put the spring in backwards?
     
  2. JR

    JR Moderator Millennium Member

    Joined:
    Dec 29, 1998
    Messages:
    3,054
    Likes Received:
    1
    Location:
    Oldtown Idaho USA
    It should still come down the same way? You may have to push the slide forward but it should still come off
     

  3. markofva

    markofva

    Joined:
    Jul 21, 2011
    Messages:
    150
    Likes Received:
    0
    Location:
    Southwest Virginia
    What if it has slipped off the barrel and is wedged between the barrel and slide on the inside?

     
  4. JR

    JR Moderator Millennium Member

    Joined:
    Dec 29, 1998
    Messages:
    3,054
    Likes Received:
    1
    Location:
    Oldtown Idaho USA
    It should still slip off. Once you have the slide lock lever down push the slide forward with your thumb. When it moves forward about 1/2 inch you can knock it the rest of the way off the frame with a soft faced hammer
     
  5. markofva

    markofva

    Joined:
    Jul 21, 2011
    Messages:
    150
    Likes Received:
    0
    Location:
    Southwest Virginia
    It worked, no damage done. You really knew what you were talking about.
    Thanks again,
    mark