close

Privacy guaranteed - Your email is not shared with anyone.

G30 trigger bars and other Qs

Discussion in 'Gunsmithing' started by YosemiteSam357, Feb 2, 2010.


  1. YosemiteSam357

    YosemiteSam357
    Expand Collapse
    Revolver Zen

    Joined:
    Apr 8, 2002
    146
    0
    Location:
    Northwest of Yosemite
    Hi,

    I just picked up a used G30, made in '07, LDE3xx serial. It has the 4265-1 (no trailing dash) trigger bar, and it sounds like it would be a good idea if I picked up the 4265-1-.

    I note Brownells carries Glock triggers. Does anyone know if their current stock is the latest -1- trigger? Secondarily, is the G21 trigger the one with the smooth face?

    Is there anything else I should watch for on a G30 from this era? I know they made some changes around locking blocks, etc, in certain models, but not sure about this one specifically.

    Thanks in advance,

    -- Sam
     

    Wanna kill these ads? We can help!
  2. faawrenchbndr

    faawrenchbndr
    Expand Collapse
    DirtyThirty fan
    CLM

    Joined:
    Nov 24, 2005
    35,893
    238
    Location:
    Troy
    If it shoots ok,.....I'd leave it be.
    It is said that one can only get a 4256-1- triger bar from a Glock certified
    armorer or by sending the firearm to glock. The 4256 is a smooth trigger face.
    And Yes, the G21 has a smooth trigger face
     

  3. luscioman

    luscioman
    Expand Collapse

    Joined:
    Mar 3, 2005
    45
    0
    Location:
    FL
    As an armorer I have had 2 people with issues (FTE)on the 30sf. They called glock and asked if there was an armorer at the store where they bought them so the part could be installed. There was no cost to the customer and I installed the part for free. So I would call them to get the free part.
     
  4. GLOCKFREAK2

    GLOCKFREAK2
    Expand Collapse

    Joined:
    Feb 13, 2006
    28
    0
    Location:
    PA
    leave well enough alone if your 30 is shooting well...
    me on the other hand just bought a new 30sf and have the 4265 -1- trigger bar in it but i am having the same problems the old bar had
    there is burring on the trigger bar and it is causing the weapon to have FTF problems :rant:
    i just sent it back to glock and i am curious as to what they will do being the fix was to use there new lower trigger bar 4256-1-
    for the previous issues

    does anyone else here have an issue with the "new" trigger bar in there 30's???
     
    #4 GLOCKFREAK2, Feb 8, 2010
    Last edited: Feb 8, 2010
  5. faawrenchbndr

    faawrenchbndr
    Expand Collapse
    DirtyThirty fan
    CLM

    Joined:
    Nov 24, 2005
    35,893
    238
    Location:
    Troy
    Check the height of your frame's rear rails. Use a nickel as a
    referance gauge. Some of the G30 models have been manufactured
    with low rear frame rails.

    Brownells does not have the 4256-1- trigger bar.
    Glockparts(.)com is the only supplier I know of that is selling them.
     
  6. GLOCKFREAK2

    GLOCKFREAK2
    Expand Collapse

    Joined:
    Feb 13, 2006
    28
    0
    Location:
    PA
    too late it was sent back to glock already... thanks though
     
    #6 GLOCKFREAK2, Feb 8, 2010
    Last edited: Feb 10, 2010
Loading...
Similar Threads Forum Date
Connectors and trigger bars? General Glocking May 19, 2014
Trigger bars for diff generations General Glocking Oct 11, 2013
Trigger/Trigger Bars General Glocking Oct 6, 2012
Different trigger bars... Gun-Parts & Access. Jul 19, 2011
WTB used trigger bars Wanted To Buy Feb 23, 2003