ftf problem on new barrel

Discussion in 'Lone Wolf Distributors Forum' started by scubanoah, Oct 11, 2011.


  1. Hello, I just purchased a 6 port extended barrel for my glock 34. First trip to the range I had 20 or so ftf out of 200 rounds. They were getting stuck in the same spot everytime, looking in the chamber it was at about the 7 o'clock position. Is there something I can try without sending it back in? I have already emailed about it and was told to send it in but said it could take 4 weeks or so. I tried 5 or 6 different ammo of various grain and +p stuff with all same result. Thanks for your time
     
  2. Loading...

    Similar Threads Forum Date
    Problems w/Conversion Barrels? Gun-Parts & Access. Dec 26, 2014
    Glock 20 and primer problems. KKM barrel question General Glocking Aug 29, 2014
    2nd Loan Wolf barrel with the same problem General Glocking Jul 9, 2014
    Storm Lake barrel problem General Glocking Nov 9, 2013
    G17 slide/barrel problem Gunsmithing Oct 22, 2013

  3. When you say they are getting stuck do you mean that they are not being pulled out of the chamber or are they clearing the chamber but not being ejected from the action all the way?

    The best bet is to just send it in for the Armorer to look at, he usually takes 2-4 weeks.
     

  4. Sorry should have been more clear. I was having feeding issues, they were nose diving at the 7 o'clock position between the feedramp and chamber. I could kind of manipulate the slide a little and force the round into the chamber. I polished the feedramp up real well and throated it just a bit and it runs awesome now. Thanks for the response
     

Share This Page

Duty Gear at CopsPlus