Privacy guaranteed - Your email is not shared with anyone.

Welcome to Glock Forum at

Why should YOU join our forums?

  • Reason #1
  • Reason #2
  • Reason #3

Site Description

Clearing cache- HP Laserjet 2200D

Discussion in 'Tech Talk' started by filthy infidel, Dec 15, 2010.

  1. filthy infidel

    filthy infidel 100% Infidel

    Apr 24, 2007
    North Carolina
    Legacy printer problem here at a client's house. He goofed, said he started a 1000 page doc. Talked him through print-properties-pause docs-cancel all-, no joy. Nothing shows in the print que on the pc or the networked laptop. When I arrived I checked the printer for jams, he said "you won't find any"... there were two sheets on two different drums. So I looked at my watch thinking how much more can I do, I didn't drive 45 mins for a 5 min hour and a half later I'm still there. I went into services.msc and stopped print spooler, looked into the system32/spooler files, nothing there on the laptop or PC. Rebooted PC and laptop, power cycled router, no joy. Every time a test page is sent to the printer the "1000 page" job restarts. I performed what HP calls a 'cold reset' as well as an 'NVRAM reset', to no avail, multiple times. After performing these, it actually prints a double-sided HP test page, but then continues on the "1000 page" job.

    I was forced to leave due to time constraints but in desparation did let the "1000 page" job run it's course by cycling the same paper stack five times, it won't finish....

    The thought of pulling my G33 and shooting the snot out of it was briefly entertaining...

    Any ideas how to clear the printer's cache? I left it unplugged and installed Teamviewer on the machine so that I can try again tomorrow.....
  2. Sgt. Schultz

    Sgt. Schultz Annoying Member

  3. srhoades


    Jul 14, 2000
    Last edited: Dec 15, 2010
  4. Pierre!

    Pierre! NRA Life Member

    Jun 20, 2003
    Lovin Sparks Nv!
    That's a pretty knarly issue Filthy Infidel.

    Especially about the 'it didn't clear the job and it started again' part.

    Thanks for the links Schultz & Srhoades.! Never know when you might need this info...

  5. filthy infidel

    filthy infidel 100% Infidel

    Apr 24, 2007
    North Carolina
    Thanks Sarge! I just remoted into the client's machine and downloaded the software, it found two files in the que. When he returns I'll have him plug the printer back in and I'll test it from here.
    That tool is going on my jumpdrive!
  6. filthy infidel

    filthy infidel 100% Infidel

    Apr 24, 2007
    North Carolina
    The client just called- it worked! Thanks all!
  7. Sgt. Schultz

    Sgt. Schultz Annoying Member

    Good to here ... it's been on my flash drive every since I stumbled across it.