close

Privacy guaranteed - Your email is not shared with anyone.

Welcome to Glock Talk

Why should YOU join our Glock forum?

  • Converse with other Glock Enthusiasts
  • Learn about the latest hunting products
  • Becoming a member is FREE and EASY

If you consider yourself a beginner or an avid shooter, the Glock Talk community is your place to discuss self defense, concealed carry, reloading, target shooting, and all things Glock.

bg 380 field strip

Discussion in 'General Firearms Forum' started by Diesel McBadass, Jul 8, 2012.

  1. Diesel McBadass

    Diesel McBadass Tactically Epic

    10,218
    664
    Apr 15, 2011
    Dover NH
    trying to strip the thing but having trouble, it says rotate the takedown pin to six o clock but for the life of me I cant rotate it past 4 and it doesnt "just come out" like many say.
     
  2. eddy t

    eddy t

    134
    0
    Feb 12, 2010
    you need to lock the slide back first, then rotate the slide lock. at first it can be stiff, just keep the pressure on as you push down. if it still won't work with your finger use something to give you a little leverage like the back of a bic pen.
    mine seems to need to rotate 180 degrees to pop out. hope this helps:cool:
     

    Last edited: Jul 8, 2012

  3. Glock212327

    Glock212327

    156
    0
    Mar 23, 2008
    IN
    If its the first time you have field striped this guns the pin will be tight. take the left over magazine floor plate and use it as leverage to get the pin to rotate. it will loosen up after shooting the gun. also another tip when putting the gun back together make sure that barrel is all the way forward then place the pin back in. Hope this helps. S&W has their own fourm as well with alot of good information. Enjoy your BG
     
  4. Diesel McBadass

    Diesel McBadass Tactically Epic

    10,218
    664
    Apr 15, 2011
    Dover NH
    ill try again l8r this is first disassembly slide was locked
     
  5. KentuckyPatriot

    KentuckyPatriot Photojournalist

    398
    17
    Aug 30, 2010
    Kentucky
    Here is what I do...

    I have the finger extension baseplate on mine. Lock the slide back and use the finger extension of the mag to push and gain leverage against the take down lever. This way I can rotate mine with a little bit of effort. In fact, it will actually rotate to about 8:00 and then I can pull it out and complete the takedown.

    hope this helps
     
  6. 3Speedyfish3

    3Speedyfish3

    236
    2
    Jun 12, 2011
    Florida
    I use a wooden dowel for leverage and rotate mine to 9:00 to get it free. They are finicky in later models because earlier TDL's came out during firing. My updated review here:

    http://thinblueflorida.com/?p=603

    Randall