close

Privacy guaranteed - Your email is not shared with anyone.

Welcome to Glock Talk

Why should YOU join our Glock forum?

  • Converse with other Glock Enthusiasts
  • Learn about the latest hunting products
  • Becoming a member is FREE and EASY

If you consider yourself a beginner or an avid shooter, the Glock Talk community is your place to discuss self defense, concealed carry, reloading, target shooting, and all things Glock.

Berry's 185 gr Plated FP - Loads?

Discussion in 'Reloading' started by Lockback, Sep 29, 2011.

  1. Lockback

    Lockback Polymerlicious!

    3,776
    765
    Nov 23, 2009
    Ohio
    I just purchased some Berry's .45ACP plated 185 grain Flat Points and need a good load for my 1911 and my G36. Nothing too wimpy ... as the 36 doesn't like those. But, knowing the limitations of plated bullets, nothing too hot either.
    Also, for those of you who may have loaded these bullets, an overall length (OAL) would be helpful too.
    Suggestions on powder and powder drops? I'm open to anything. I'm thinking of a medium slow powder ...
     
    Last edited: Sep 29, 2011
  2. fredj338

    fredj338

    21,977
    1,074
    Dec 22, 2004
    so.cal.
    OAL, as always, gun & bullet specific. Make a dummy round @ 1.220" & see if it chambers. If a go, try 1.230", if a no go, drop to 1.210". Powders, well, we all have favorites but no one has proven to me there is anything better than WST in the 45acp, any bullet style or wt. Plated load between a lead & jacketed bullet, so starting @ 4.5-4.6gr should get realiable feeding. DO NOT over crimp, plated hate that. This includes the ever popular Lee FCD. I have proven it ruinous to accuracy w/ soft plated bullets. These are 200gr, but you can see they were not happy; shot @ 50ft.
    [​IMG]
     

    Last edited: Sep 29, 2011

  3. ColoCG

    ColoCG

    936
    0
    Mar 18, 2011
    Colorado
    I load this same bullet ahead of 6.5gr. of Unique and 4.9 gr. WST both loaded to col. of 1.200" in a Springfeild XD. Great accuracy with both loads
     
    Last edited: Sep 30, 2011
  4. cowboy1964

    cowboy1964

    19,979
    2,295
    Sep 4, 2009
    U.S.A.
    I don't think you could possibly get 45s up to high enough velocity to worry about the plating.
     
  5. fredj338

    fredj338

    21,977
    1,074
    Dec 22, 2004
    so.cal.
    Velocity isn't the issue but over crimping ruins accuracy. It either sizes the soft bullet down &/or breaks the plating. When that happens, accuracy goes out the window fast.
     
    Last edited: Sep 30, 2011
  6. Lockback

    Lockback Polymerlicious!

    3,776
    765
    Nov 23, 2009
    Ohio
  7. jfrey

    jfrey

    179
    0
    Apr 9, 2011
    I load the same shape bullet but in 200 gr. for my 1911's. My G36 won't feed them at a OAL of 1.200. It only likes ball configuration bullets. I load 6.2 grns of Unique or 6.4 grns of WSF under them and I have a friend who uses the same Unique load under his 185's. They all seem to shoot good depending on the gun used.