close

Privacy guaranteed - Your email is not shared with anyone.

Welcome to Glock Talk

Why should YOU join our Glock forum?

  • Converse with other Glock Enthusiasts
  • Learn about the latest hunting products
  • Becoming a member is FREE and EASY

If you consider yourself a beginner or an avid shooter, the Glock Talk community is your place to discuss self defense, concealed carry, reloading, target shooting, and all things Glock.

Be my virtual chronograph

Discussion in '10mm Reloading Forum' started by HOV, May 6, 2010.

  1. HOV

    HOV

    252
    0
    Mar 5, 2005
    I have worked up a 10mm delf-defense load that feels pretty good in terms of control and very good in terms of accuracy. I don't have a chronograph though, and wanted to see if anyone had worked up a similar load and chronoed it.

    180-gr. Hornady XTP
    6.6-gr. Unique
    CCI LPP

    IIRC, the reloading manual shows this between 1050 and 1100 fps. I'd like confirmation of that if possible.
     
  2. hill billy

    hill billy Head Case

    2,598
    0
    Mar 11, 2008
    I load midrange .40 with an 180 gr fmj over 6.2 gr of Unique. Alliant shows a max in .40 of 6.8 grains of Unique with a 180 gr JHP. I guess my question would be, why so slow? If you like it that slow, you could put that same bullet and charge in a .40 and get the same results. That bullet will go 1300fps easily so why give up the power, isn't that the point of 10mm? Just asking...
     

    Last edited: May 7, 2010