Just bought a new Tanfoglio Witness 45 and not really sure what's going on with accuracy issues. Just to be very clear, the gun was RESTED during testing, at ~15 yards. Shot one hole, subsequent shots were aimed at that point. Lee TL 230gr RN boolit, ALOX lubed, towel dropped Unsized, measures .452 4.2 Bullseye (mild load) I haven't slugged the barrel yet and need to do that. The top target is with my CZ 9mm, along with the left side of the lower target (so just disregard those sections please). Bottom line, should I ditch the TL mold and get a normal one with sizing die, or is something else going on here?