Glock Talk banner
Status
Not open for further replies.

GLOCK 30S OWNERS GHOST EDGE CONNECTOR DOES NOT WORK AT ALL!

2K views 15 replies 11 participants last post by  DJ Niner 
#1 ·
Title says it all, just a huge fyi to owners of the best .45 glock makes :rollsmiley:
In all seriousness though, I contacted Ghost inc multiple times and not one response on there always backed up products!!
 
#2 ·
Title says it all
On the contrary...your "title" says absolutely nothing that is coherent or useful. The use of all caps is juvenile. The body of your post is little better.

What do you seek from this forum? With certainty, nobody can tell what your problem is, and your presentation really sucks...big time. Was the only purpose of your post just to complain about an aftermarketer's customer service?

Welcome to Glock Talk. But if you want to get anything from the forum, you'll need to do a much much better job of presenting your subject. Try to relax. :)
 
#5 ·
That's not surprising.

Last week I bought a Zev drop in trigger for my 30s.

After installation the gun would not fire so I called Zev and the tech there told me to put the stock connector in. (this was on a drop in trigger unit).

After putting in the stock connector it worked.

Zev is sending me a new connector.

Meanwhile, I had another Zev connector lying around that I installed and it worked.

Moral of this story: Heck if I know.
 
#9 ·
New Glock Guy says "I modified my Glock and now it doesn't work..." Really? So it must be the fault of the aftermarket part, it could never be the fault of the dumb guy who put it in. The sad part is, even if it was properly installed, it wouldn't make the dumb guy any better of a shooter, he would still be just the dumb guy with a lighter trigger, which is an even worse combination.

That's why the Ghost Man says 'READ THIS PART FIRST"

A gunsmith or armorer should install this connector.
THIS IS NOT A DROP IN TRIGGER CONNECTOR MINOR FITTING IS REQUIRED.
Installation tools recommended.

 
#11 ·
New Glock Guy says "I modified my Glock and now it doesn't work..." Really? So it must be the fault of the aftermarket part, it could never be the fault of the dumb guy who put it in. The sad part is, even if it was properly installed, it wouldn't make the dumb guy any better of a shooter, he would still be just the dumb guy with a lighter trigger, which is an even worse combination.

That's why the Ghost Man says 'READ THIS PART FIRST"

A gunsmith or armorer should install this connector.
THIS IS NOT A DROP IN TRIGGER CONNECTOR MINOR FITTING IS REQUIRED.
Installation tools recommended.

Hey pal, it clearly says right on there website "BUMP FREE trigger connector for GLOCK Gens 1-4 No more wall of resistance after the take up!
This Edge does not fit the 42 or 43. See category # 7 for the Edge that is made for these.
DROP-IN, NO FITTING REQUIRED!
Lighter!
SMOOTHER!
PERFECT FUNCTION! GENERATIONS 1-4
GHOST GUARANTEE!
DID YOU READ LIGHTER,SMOOTHER?!!"


Please tell me where it says it doesn't work on a glock 30S and where it says its not a drop in trigger. Ha.
 
#13 ·
I've made all my glocks now stock with dremeled and polished stock parts (except got "target" trigger bar installed into them with smooth face trigger shoe) and they are all at 4 lbs even right in the middle of the trigger so im happy but damn waste of money on a part that doesnt even work in the gun I got it for.
 
#15 ·
This is more than hilarious. You joined 1 day ago, and you are a Glock expert??? The Dremel is the fastest way to ruin any gun platform, even a Glock. But, BTW, how did yo measure your trigger pull? Ghost Inc. is a real company for real shooters. They have been around. Whatever you did screwed it up.
 
#16 ·
Glock Talk rules/TOS:

http://www.glocktalk.com/threads/glock-talk-rules-of-conduct.1624292/

Rule #16. Threads or posts on Glock Talk may NOT be used to deliberately trash, denigrate, or malign other websites or forums. DO NOT drag your board wars over to this site. Glock Talk is also not to be used as a complaint department for online merchants or sellers. If it comes up in a discussion, you may post your experience(s), but do not start a thread just to complain about a problem you had with a seller/merchant. If you do so, it will jeopardize your account on Glock Talk.
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top