[DLL9mm]

I just ordered a some for my G17. If I like them, I will order them for my other Glocks. Thanks!

[D445547]

Originally Posted by Bohica1998

Got it today.

D445547,

I realize it may not be economically feasible for you to make up grips just for the handguns I mentioned earlier, but...

How about sheets, strips, shapes of the material to DIY for those of us with these not so common handguns? I mean generalized shapes for say the sides, others for the mainspring area, long racetrack style ovals, etc? Kind of a generic all-purpose kit.

You would probably have just as good an idea which ones would work best as I would, but you get the general idea?

Just a thought. I think they would sell, but I could be wrong!

Interesting idea, I may have to look into that. Thank You.

[D445547]

Originally Posted by Miranda

If they didn't match perfectly let the consumer buy a purse to "match". Personally grips are for gripping and if they were close in color that would be fine with me.I'd put od grips on a black gun and black grips on an od just to befuddle the masses.Make'em and they will sell.

[D445547]

Originally Posted by DLL9mm

I just ordered a some for my G17. If I like them, I will order them for my other Glocks. Thanks!

Right on, you should be getting them in the mail very soon! Thank You!

[bricker]

Do you make a grip for a 2nd gen 19?

[nxttruck2002]

Originally Posted by nxttruck2002

D, I would really appreciate it to see some OD glocks with the black Talon grip tape!

Originally Posted by D445547

Working on it now.

Update?

[D445547]

Originally Posted by bricker

Do you make a grip for a 2nd gen 19?

My compact grip will fit that model and will have finger strips on it just like the pictures.

[D445547]

Originally Posted by nxttruck2002

Update?

I thought I had an OD Glock the other week but the deal fell through so it looks like an OD pic will be a ways off. I do have an OD P3AT I could put some of the grip on and post a pic of it if you would like.

[pennhead]

Derik,

I've just put your Talon grips on both my G26 & G17. They look and feel great!

This procedure worked very well for me:

1. Place grips on gun, not worrying about getting everything to stick down.
2. Align portion on backstrap dead center, align finger groove strips evenly with finger grooves.
3. Warm backstrap portion with blowdryer, and stick it down. Warmed grip can slide somewhat to fine tune alignment.
4. Warm sides of grips, stick down all edges, and fine tune alignment.
5. Warm finger groove strips, stick them down and fine tune alignment.
6. I had some very small scissors with long handles, and using just the tips of the blades cut the excess length from the finger groove strips, letting the lower blade slide along the front edge of the side grip, where they overlap, as a guide.
7. Warm these freshly cut areas, stick down and press well up against front edge of side grip.

This procedure resulted in a grip that appears virtually endless in circumference. You must look closely to see the seam.

The only thing I can see that might improve this grip is to include an alcohol swab packet with the order

[Bohica1998]

The only thing I can see that might improve this grip is to include an alcohol swab packet with the order

I just cheated and sprayed alcohol all over the pistol grip, wiped it down, sprayed it again and waited for it to air dry real good. lol!

...using just the tips of the blades cut the excess length from the finger groove strips, letting the lower blade slide along the front edge of the side grip, where they overlap, as a guide.

That is EXACTLY how I did it. Looks good too.

[pennhead]

Originally Posted by DLL9mm

I just ordered a some for my G17. If I like them, I will order them for my other Glocks. Thanks!

I think you'll like 'em. I just put them on my G17 & G26... they really shine on the short grip subcompacts!

[D445547]

Originally Posted by pennhead

Derik,

I've just put your Talon grips on both my G26 & G17. They look and feel great!

This procedure worked very well for me:

1. Place grips on gun, not worrying about getting everything to stick down.
2. Align portion on backstrap dead center, align finger groove strips evenly with finger grooves.
3. Warm backstrap portion with blowdryer, and stick it down. Warmed grip can slide somewhat to fine tune alignment.
4. Warm sides of grips, stick down all edges, and fine tune alignment.
5. Warm finger groove strips, stick them down and fine tune alignment.
6. I had some very small scissors with long handles, and using just the tips of the blades cut the excess length from the finger groove strips, letting the lower blade slide along the front edge of the side grip, where they overlap, as a guide.
7. Warm these freshly cut areas, stick down and press well up against front edge of side grip.

This procedure resulted in a grip that appears virtually endless in circumference. You must look closely to see the seam.

The only thing I can see that might improve this grip is to include an alcohol swab packet with the order

Outstanding method. As per your suggestion Talon Grips now include an alcohol swab. Thanks Pennhead!

[1985 4Runner]

Pm sent

I want one for a G19.

[Korrupted]

Just placed an order, look forward to trying it out.


Are you on Arizonashooting.com?

[D445547]

Originally Posted by Korrupted

Just placed an order, look forward to trying it out.


Are you on Arizonashooting.com?

Thank you, it will ship tomorrow! I am not on AZShooting but I think I need to be. Another member suggested that to me too.

[Korrupted]

Originally Posted by D445547

Thank you, it will ship tomorrow! I am not on AZShooting but I think I need to be. Another member suggested that to me too.

Sweet, thanks man!

Yeah, there are quit a few Glockers over there too.

[D445547]

Originally Posted by Korrupted

Sweet, thanks man!

Yeah, there are quit a few Glockers over there too.

Cool. I just signed up, same name D445547. Now I just got to look it over and learn the ropes.

[DLL9mm]

Heres my G23 with Talon Grips....

[DLL9mm]

I also wanted to add, When installing these, heat helps a lot. I used a hair dryer, and it makes it so much easier to work with. Especially on the excess from the finger strips. Nice grip. I carry IWB 4:00, Hopefully these work out when carrying.

[DLL9mm]

Just ordered some for my G27 also.....

[D445547]

Originally Posted by DLL9mm

Just ordered some for my G27 also.....

Thank you DLL, awesome pics too!!!

[Bababooey]

Originally Posted by HAVOC

So basically, what are they? Sand embedded rubber sheet?

Yea the pic on the site is hard to make out what material...it looks like skateboard "tape" they use to get grip on the kids boards.

so any reviews from those who have got theirs ?

[DLL9mm]

Originally Posted by Bababooey

Yea the pic on the site is hard to make out what material...it looks like skateboard "tape" they use to get grip on the kids boards.

so any reviews from those who have got theirs ?

They feel nice. When drawing from a Holster, the gun is A LOT easier to grab. It gives you better control in my opinion. Definetly worth 10bucks.

[1985 4Runner]

Originally Posted by Bababooey

Yea the pic on the site is hard to make out what material...it looks like skateboard "tape" they use to get grip on the kids boards.

so any reviews from those who have got theirs ?

I should have mine soon & will post pics & a review.

[D445547]

Originally Posted by 1985 4Runner

I should have mine soon & will post pics & a review.

You will, they ship tomorrow. Thanks again!