FS: Fenix TK70 2200 Lumen Flashlight w/Tenergy Charger and Batteries 13K
Fenix's TK70 is an extremely bright multi-functional flashlight powered by Four D Batteries. Easily blowing past the competition with a maximum output of 2200 Lumens in Turbo mode, it also manages to pull an incredible 7-day long runtime, on it's low setting. The easy to use dual switch system on the front of the light makes for fast and convenient switching between the four outpout modes and two flashing modes. Built from Aircraft Grade Aluminum the TK70 will provide the perfect combination of outstanding performance and durability for years to come.
ANSI/FSC General Mode Flashing Mode
Turbo High Mid Low Strobe SOS
Output 2200 Lumens 930 Lumens 300 Lumens 20 Lumens 2200 Lumens 930 Lumens
Runtime 1h 50min 4h 30min 15h 168h - -
Throw 2,362 Feet (720m)
Impact Resistance Impact Resistant to 3.3 Feet (1m)
Water Resistance IPX-8 Waterproof to 6.6 Feet (2m)
Accessory Lanyard, shoulder strap and spare o-ring
Features and Benefits:
LED: Cree XM-L, Rated for a lifespan of 50000 hours!
Uses 4 x Ni-MH D (Batteries not included)
NOTE: Ni-MH Batteries recommended. Flashlight will operate with 4 x alkaline D cells but some modes will not work!
Dimensions and Weight:
Length: 15.94" (405mm)
Head Diameter: 4.17"
Body Diameter: 1.57" (40mm)
Weight: 27.13 oz (769g) (Without Batteries)
Digitally Regulated Output - Maintains Constant Brightness
Reverse polarity protection - Protects against improper battery installation
Built in Over-Discharge Protection Circuit Protects Your Batteries
Fast and Easy Dual Switch System
Constructed from Durable Aircraft Grade Aluminum
Premium Type III hard-anodized anti-abrasive finish
Toughened ultra-clear glass lens with anti-reflective coating
Notice: The above-mentioned parameters (tested by four high-quality D Ni-MH batteries with a measured capacity of 9000mAh in Lab) are approximate and may vary between flashlights, batteries and environments.
The right button is a power switch. Press it once to turn on/off the light. The left button is a mode switch;
When turn on the light, it will enter into the general mode. A fast double press on the power switch can select between the general mode and the flashing mode.
In the general mode, a single press on the mode switch can select the brightness level in the order of Turbo→Low→Mid→High→Cycle.
In the flashing mode, a single press on the mode switch can select between different flashing functions in the order of Strobe→SOS→Cycle.
The circuit can memorize any brightness level in the two modes. When turn on the light again or transfer into the mode, it will enter into the previous brightness level directly.