[ghr1142]

Hello to all, I have a problem with an Ithaca Mod. 300 2-3/4" 12 ga.
My problem is I can load the magazine and close the bolt. but when trying to chamber the first round it will not pull that round from the magazine ? could the extracter be broke ? I'v had this gun for years and it just started with this issue.
and help would be welcome.
ghr1142

[guns54]

Originally Posted by ghr1142

Hello to all, I have a problem with an Ithaca Mod. 300 2-3/4" 12 ga.
My problem is I can load the magazine and close the bolt. but when trying to chamber the first round it will not pull that round from the magazine ? could the extracter be broke ? I'v had this gun for years and it just started with this issue.
and help would be welcome.
ghr1142

Is your extractor sharp,if not use a small file and sharpen it, Mine did the same.If its not sharp it wount pull the shell out.It only take a min or to. Go to utube and find out how to do it. Hope this helps, Sorry iam not good with words.Have a safe night.P.S. Let me know if it works for you.

[ghr1142]

Thank you guns54, I will give it a try.
ghr1142

[guns54]

Originally Posted by ghr1142

Thank you guns54, I will give it a try.
ghr1142

Your welcome,Have a nice night.