I'll be making a trip to Pittsburgh on Nov 9th, returning home to Columbus on the 13th or 14th.
The reloading setup is based on a Dillon 650XL, here’s a list of most of the items.
Strong Mount/Bullet Tray/Handle
3 additional sizes for case feeder
6 Tool Heads
Tool Head Stand
Powder Measure Set
Foster Ultra Bullet Seater 308
223/308 Carb Dies
9mm/10mm/38/45/223/308 Conversion Kits
2001 Case Cleaner
2000 Media Separator
Dillon D Terminator Scale w/ cover
Spare Parts and Maint Kit
Tool holder and tools
Stuck Case Remover
Kiss Bullet Feeder
21k+ 9mm Brass
223 case gauge
******** width="480" height="385">******* name="movie" value="http://www.youtube.com/v/Tw9Q4XObYzA?fs=1&hl=en_US"></param>******* name="allowFullScreen" value="true"></param>******* name="allowscriptaccess" value="always"></param>******* src="http://www.youtube.com/v/Tw9Q4XObYzA?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Not shown in the video are the powders, bullets, and a few hundred primers that would be included on a FTF transfer.
The powders are all mostly full, some are unused entirely.
Starting from top left:
The bag and small cardboard box are 230gr 45 cal bullets from Precision Bullets in TX.
The center jug is 30.6lbs, 115gr 9mm bullets also from Precision (1800+)
The right box is just shy of 3k 180gr 10mm/40cal bullets also from Precision
The little plastic box is Barns 308 Triple Shocks, ~30-35
The bottom plastic box is Barry’s 350gr 50cal bullets, ~100