GlockTalk.com
Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.

 
  
Reply
 
Thread Tools Display Modes
Old 11-10-2012, 10:44   #1
mc1911
Senior Member
 
Join Date: Nov 2011
Posts: 301
favorite handload

I do not accept any responsibility for my load if used by others.

In MY 23 my go to load is 5.8 grains of WSF and a Lee tumble lube 175 grain truncated cone bullet for a measured 950 fps.
mc1911 is offline   Reply With Quote
Old 01-07-2013, 13:29   #2
Poohgyrr
trout fear me!
 
Poohgyrr's Avatar
 
Join Date: Nov 2001
Location: Sutter's Fort
Posts: 1,171


I don't remember my favorite 40S&W load, but I use bulk Winchester 180 JHP's, AA7 powder. Book loads that test about 950 fps.
__________________
John Luke 22:36 Ephesians 4:26-32
357Sig Club #3531 S&W Club #10 BHP Club #35
"Life brings both sorrows and joys alike. It is what a man does with them - not what they do to him - that is the true test of his mettle." T. Roosevelt
Poohgyrr is offline   Reply With Quote
Old 01-13-2013, 20:10   #3
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
One of the most consistent loads I've tried is 4.4gr of TiteGroup (180gr FMJ/JHP) @ 1.130" and does right at 900 fps from a G23.

Power Pistol is a personal favorite, very consistent and good for "normal" level loads. Here's what I got:
(bone stock G23 Gen4, CCI SP primers)

180gr Gold Dot, 7.2gr Power Pistol @ 1.125": 1065 fps avg

165gr Gold Dot, 8.0gr Power Pistol @ 1.125": 1154 fps avg (8 fps extreme spread!)

155gr Rem JHP, 9.0 gr Power Pistol @ 1.125": 1246 fps avg

135gr Nosler JHP, 10.0gr Power Pistol @ 1.125": 1,372 fps avg

7.2gr Power Pistol and 6.5gr Unique will both do about 1150 from a Glock 35 and right around 1200 fps from a G24 (6" bbl).

8.5gr of Longshot (**6% over book**) will shoot a 180gr XTP at an average of 1,330 fps from a 6" bbl. Warm and very consistent, 15fps extreme spread.

**I worked this load up, and I use it in an aftermarket KKM barrel**

I have tons of load data I've worked up.
__________________
"Condemnation without investigation is the height of ignorance."

Last edited by SDGlock23; 01-19-2013 at 10:05..
SDGlock23 is offline   Reply With Quote
Old 01-19-2013, 10:04   #4
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
I've found Longshot to have a certain characteristic about it. I've had some for a while now and what always bummed me out about Longshot was that it just seemed like I could never get out of it what Hodgdon claimed. I would load up to book max and even in a longer barrel would come up noticeably short in velocity. Not only that, but often the velocity would be erratic with wide spreads. Driving it faster seems to make it more consistent.

Keep in mind I run these loads through my Gen4 G35 with a 6" G24 KKM barrel installed. It has better case support than the stock barrel and the added length is a plus. I used to load for the 10mm but recently got rid of it, and I've been keeping my eye on what 10mm guys are doing in their setups for quite some time.

One thing you'll notice right off the bat is that most who load for the 10mm end up buying aftermarket barrels for their 10mm (often 6") and then they start in with their "warm" handloads. Go on over to the 10mm reloading section and see for yourself, there are loads listed there that are anywhere from 10% to 25% over book max charges.

As with all things, this is a topic of debate, but I feel (as do others) that the .40 S&W case is stronger than the 10mm case. Notice how all three cartridges, one based off the 10mm, one based off the .40, have a different max PSI rating. 10mm is rated at 37,500 PSI, the .40 S&W is rated at 35,000 PSI and the 357 Sig is rated at 40,000 PSI. But why?

Here is my question, why isn't the .40 also rated the same as the 357 Sig? Why isn't the .40 rated, at the very least, the same as the 10mm? I know that the .40 case isn't any weaker than the 10mm or 357 Sig case.

The .40 and 357 Sig use small primer pockets while the 10mm uses a large primer pocket. To keep it short and sweet, there's more material in the case of the .40 and 357 Sig than there is the 10mm, and more material means more support. Additionally, the .40 was originally rated for 35K PSI and several years later it was beefed up, but the 35K rating never changed, and hasn't so far. IMHO, there's no reason the .40 shouldn't be rated for 40K PSI as well.

What I'm getting at is this, 10mm guys are loading well beyond book max in a case that's not quite as strong as the .40. What I've been messing around with for quite some time is doing the same thing as the 10mm guys do with their 10's, but instead I'm using a .40. I've gotten some very interesting results, but I've already come to the conclusion that there aren't too many loading the .40 to what it's capable of.

Back to Longshot, I've figured out that in the .40 you need to go slightly over book with LS to make it come alive. Please note, my results are from my setup and I DO NOT advise anybody to use my data in their gun, it's not plug and play. You can use my data for reference, but if you decide to get the most out of your .40, first off work up your loads and secondly make sure you have an aftermarket barrel with better case support. A heavier recoil spring is recommended as well (22-24lb) and a comp would help out too.

I haven't messed around a lot with 135gr or 200gr in Longshot, but I have some interesting figures for the rest. I use CCI SP primers and 1x Federal ("Federal" stamped, do not use "FC" stamped) brass. Velocities are averages from the 6" G24 KKM bbl. NOTE: I feel 10% over book is about it, don't go beyond. As you see, there's no reason to push it further.

180gr Montana Gold JHP, 8.5gr Longshot @ 1.130" = 1,327 fps (approx 6% over book max)

180gr Montana Gold JHP, 8.8gr Longshot @ 1.125" = 1,402 fps (10% over book) That's 786 ft-lbs!

165gr Gold Dot, 9.0gr* Longshot @ 1.130" = 1,412 fps (See * below)

165gr Gold Dot, 9.5gr* Longshot @ 1.130" = 1,485 fps / 808 ft-lbs!

155gr Rem JHP, 10.8gr Longshot @ 1.125" = 1,554 fps (8% over book max) That's 831 ft-lbs!

*Hodgdon data is low for the 165gr, but I know why. They use the 165gr Sierra JHP, which is a rather long 165gr JHP. The 165gr Gold Dot is considerably shorter. Based on what Hodgdon claims for the other bullet weights, I calculated that a 165gr Longshot charge should be around 9.0-9.2gr.

As I mentioned earlier, a lot of the "book" Longshot loads weren't very consistent, but driven a little harder the numbers got a whole better and the velocity spread tightened down a whole lot too. Longshot is a fairly slow burning powder and it meters very well also, which is a plus, and it's somewhat common too. Maybe this will inform some people of what the .40 is capable of.
__________________
"Condemnation without investigation is the height of ignorance."

Last edited by SDGlock23; 01-19-2013 at 10:13..
SDGlock23 is offline   Reply With Quote
Old 01-20-2013, 15:26   #5
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
Same warning applies, this is my data in my setup. You can use it for reference, but if you look to load some for yourself, work up the loads in your gun.

Gen4 G35 w/KKM G24 (6") bbl. Once fired Federal brass and CCI SP primers. About 40 degrees outside.

135gr Nosler JHP, 12.6gr Longshot @ 1.125" : 1,849 fps avg / 1,026 ft-lbs (31 fps ES)

200gr Hornady XTP, 7.7gr 800x @ 1.130": 1,228 fps avg.

Shot the 200gr XTP into some water jugs, penetrated 5 jugs and bounced off the sixth. Mushroomed nicely and penetrated well, most don't make it past the 4th jug.
__________________
"Condemnation without investigation is the height of ignorance."

Last edited by SDGlock23; 01-20-2013 at 15:59..
SDGlock23 is offline   Reply With Quote
Old 01-21-2013, 14:33   #6
bmoore
Senior Member
 
bmoore's Avatar
 
Join Date: Jan 2006
Location: Under a regime.
Posts: 4,440
11.0 grains of Bluedot under 180grn bullet. 10mm.
__________________
RIP Okie
bmoore is offline   Reply With Quote
Old 01-24-2013, 09:38   #7
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
Speaking of Blue Dot, I have some but have yet to load too many for it. But I have done a few. I do know that, like most loads, it's all about finding the sweet spot. Even some minor OAL variations can make a difference.

When I loaded for the 10mm, 10.5gr of BD would get me around 1150 fps from a stock G20sf. The stock barrel would work the brass pretty good though and put some Glock-belly on it.

In the G35, a 180gr MG JHP, 9.0gr Blue Dot @ 1.100": 1,201 fps (nicely consistent, 13 fps ES). The same bullet loaded to 1.125" was slightly slower but definitely less consistent.

For 200gr Nosler JHP, 8.5gr Blue Dot @ 1.130": 1,165 fps (52 ES)
__________________
"Condemnation without investigation is the height of ignorance."
SDGlock23 is offline   Reply With Quote
Old 01-31-2013, 10:09   #8
ss30378
Member
 
Join Date: Mar 2012
Location: Alabama
Posts: 65
SD thanks for posting all this data, longshot seems to be the cats meow for the 40/10mm bore. I've gone up to 8.2 grains of PP under a zero 180 grain bullet at 1.150 and got 1375 fps out of my 24. Mine still has the stock barrel but has a shocking amount of case support. Probably the best i've ever seen for a glock and on par with most aftermarket barrels ive looked at.
ss30378 is offline   Reply With Quote
Old 02-01-2013, 12:13   #9
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
Quote:
Originally Posted by ss30378 View Post
SD thanks for posting all this data, longshot seems to be the cats meow for the 40/10mm bore. I've gone up to 8.2 grains of PP under a zero 180 grain bullet at 1.150 and got 1375 fps out of my 24. Mine still has the stock barrel but has a shocking amount of case support. Probably the best i've ever seen for a glock and on par with most aftermarket barrels ive looked at.
No problem SS, glad someone enjoyed it I LOVE Power Pistol but so far I've only used book loads with it in the .40. I'll have to work up some loads for it, but that still got me almost 1100 fps from my 4" G23. 1,375 fps for that 180gr is impressive for sure, and one thing I've noticed in the past with Power Pistol is that it's very consistent.

Is your G24 a newer model? My Gen4 G35 has pretty good case support too, but I will say the newer .40's have much better support than older ones. I just decided to use the G24 KKM barrel since it was a tad tighter plus the extra length helped give some more velocity. I've recently wondered what the LW 9" barrel would go velocity wise, but that's $150 I don't need to spend right now!
__________________
"Condemnation without investigation is the height of ignorance."
SDGlock23 is offline   Reply With Quote
Old 02-01-2013, 12:36   #10
Cwlongshot
Senior Member
 
Cwlongshot's Avatar
 
Join Date: May 2011
Location: Connecticut
Posts: 434
In my G23 40 cal I like the 180 Speer GD and Blue Dot powder.

The .40 S&W Club

The .40 S&W Club

In my G20 10MM I like 200XTP and 175 ST. With Longshot powder.


The .40 S&W Club


CW
__________________
NRA Life member NRA Certified Pistol & Shotgun Instructor NRA Certified Rifle Coach Certified Range Officer Reloading Instructor
ALWAYS REMEMBER, FREEDOM IS NOT FREE

Last edited by Cwlongshot; 02-01-2013 at 18:25.. Reason: Added pics
Cwlongshot is offline   Reply With Quote
Old 02-04-2013, 09:50   #11
ss30378
Member
 
Join Date: Mar 2012
Location: Alabama
Posts: 65
Quote:
Originally Posted by SDGlock23 View Post
No problem SS, glad someone enjoyed it I LOVE Power Pistol but so far I've only used book loads with it in the .40. I'll have to work up some loads for it, but that still got me almost 1100 fps from my 4" G23. 1,375 fps for that 180gr is impressive for sure, and one thing I've noticed in the past with Power Pistol is that it's very consistent.

Is your G24 a newer model? My Gen4 G35 has pretty good case support too, but I will say the newer .40's have much better support than older ones. I just decided to use the G24 KKM barrel since it was a tad tighter plus the extra length helped give some more velocity. I've recently wondered what the LW 9" barrel would go velocity wise, but that's $150 I don't need to spend right now!
Yes my 24 was bought new about a month ago. I may still go a kkm or fitted barrel to shoot lead out of it. The glock chamber has more support but it's still a loose chamber so it's not optimal for accuracy. That 9" barrel seems so long that i'd have to add a stock to the gun just to feel right i think. But it would be cool to see how fast those bullets would go with some of the slower powders.
ss30378 is offline   Reply With Quote
Old 02-17-2013, 12:35   #12
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
Not sure how many have any VV 3N38, but it does well:

(Gen4 G35 w/6" KKM G24 bbl)

165gr Gold Dot, 10.7gr 3N38 @ 1.150" : 1,392 fps avg (7 fps ES!)

175gr Win STHP, 9.8gr 3N38 @ 1.140": 1,288 fps avg (17 fps ES!) 645 ft-lbs (Winchester claims 1290 for their 10mm load, yet only does about 1150 fps, here I'm getting it!)

180gr LaserCast RNFP hardcast (.38-40 bullet), 9.8gr 3N38 @ 1.135": 1,338 fps avg (9 fps ES!) 715 ft-lbs

180gr Hornady XTP, 9.5gr 3N38 @ 1.150" : 1,269 fps avg (13 fps ES!)

200gr WFNGC, 8.5gr 3N38 @ 1.150" : 1,195 fps avg (10 fps ES!)

If you want to make your .40 feel like a 9mm -P, 3.8gr TiteGroup with a 180gr @ 1.140". So soft it almost tickles.
__________________
"Condemnation without investigation is the height of ignorance."

Last edited by SDGlock23; 02-17-2013 at 12:49..
SDGlock23 is offline   Reply With Quote
Old 02-25-2013, 12:24   #13
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
Here are a few more, ran through the stock G35 Gen4 (5.3" bbl)

180gr FMJ, 6.2gr AutoComp @ 1.125": 1,035 fps (4 FPS ES!!!)

180gr MG JHP, 8.3gr Longshot @ 1.130": 1,260 fps

180gr MG JHP, 8.5gr Longshot @ 1.130": 1, 271 fps

165gr Gold Dot, 9.0gr Longshot @ 1. 130": 1,310 fps

155gr Rem JHP, 10.5gr Longshot @ 1.125": 1,408 fps

Not as fast as what I get from the 6" KKM barrel, but good nonetheless. Brass looked okay. Yes there was some Glock belly on the brass, but it happened on all loads, not just the warm Longshot loads.
__________________
"Condemnation without investigation is the height of ignorance."

Last edited by SDGlock23; 02-26-2013 at 10:30..
SDGlock23 is offline   Reply With Quote
Old 04-06-2013, 17:13   #14
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
Few small goodies from today. Shooting Gen4 G27, velocities are averages:

180gr FMJ, 4.4gr TiteGroup @ 1.125": 857 fps

180gr MG JHP, 5.8gr WSF @ 1.125": 930 fps

180gr MG JHP, 6.3gr AutoComp @ 1.125": 996 fps

180gr MG JHP, 6.5gr Unique @ 1.125": 1,022 fps (13 fps ES)

180gr MG JHP, 7.2gr Power Pistol @ 1.120": 1,044 fps (19 fps ES)

180gr Rem JHP, 9.0gr VV 3N38 @ 1.130" : 1,091 fps

165gr Gold Dot, 10.2gr VV 3N38 @ 1.125": 1,188 fps

155gr XTP, 9.0gr Power Pistol @ 1.125": 1,196 fps (7 fps ES)

155gr Rem JHP, 11.0gr VV 3N38 @ 1.130": 1,263 fps

135gr Nos JHP, 11.2gr 800x @ 1.125": 1,388 fps
__________________
"Condemnation without investigation is the height of ignorance."

Last edited by SDGlock23; 04-06-2013 at 17:16..
SDGlock23 is offline   Reply With Quote
Old 04-07-2013, 06:05   #15
happie2shoot
Senior Member
 
Join Date: Jan 2008
Posts: 626
SDGlock23 I wish you lived in the Boise Idaho area.
I have a mod.27 and want to try some cast 175 lee in
it with Longshot, still waiting on the mold to get here.
I have a LW 4.059'' threaded barrel and am getting a
4.6'' LW threaded barrel to get more fps. Keep sending
all information, please.
I normally shoot mag. revolvers but am going to try the
lighter Glocks for a trail gun, am also building a 460 Rowland
on a mod. 30, still waiting on the barrels for it too.
Can't wait to try them on deer this year.
happie2shoot is offline   Reply With Quote
Old 04-07-2013, 11:10   #16
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
Quote:
Originally Posted by happie2shoot View Post
SDGlock23 I wish you lived in the Boise Idaho area.
I have a mod.27 and want to try some cast 175 lee in
it with Longshot, still waiting on the mold to get here.
I have a LW 4.059'' threaded barrel and am getting a
4.6'' LW threaded barrel to get more fps. Keep sending
all information, please.
I normally shoot mag. revolvers but am going to try the
lighter Glocks for a trail gun, am also building a 460 Rowland
on a mod. 30, still waiting on the barrels for it too.
Can't wait to try them on deer this year.
Will do! I have a few more I'm about to post up with Longshot from the G27 today. I haven't messed with any 175gr hardcasts, but I do have some data for the 170gr SWC hardcast, it's as follows:

(This data was taken from a 6" KKM barrel. With a 175gr hardcast I would drop charge to around 8.0gr and work up. Velocity is average)

170gr SWC, 9.0gr Longshot @ 1.125": 1,449 fps (20 fps ES!) That's 792 ft-lbs.

I just noticed that I don't have any data for 180gr hardcasts with Longshot. VV 3N38 and 800x both got almost 1,350 fps from the 6" KKM, but strangely enough I don't have any using Longshot. I'll have to remedy that.

Good luck on that 460 Rowland! I would imagine working with 250-280gr hardcasts in that would be awesome.
__________________
"Condemnation without investigation is the height of ignorance."

Last edited by SDGlock23; 04-07-2013 at 11:12..
SDGlock23 is offline   Reply With Quote
Old 04-07-2013, 11:17   #17
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
Okay, I got to run a few more this afternoon through the G27 Gen4. This time my main goal was to see what Longshot can do. Here it goes, working up from 8.0gr.

(Precision Delta 180gr FMJ used, 1x Federal brass and CCI SP primers)

180gr FMJ, 8.2gr Longshot @ 1.130": 1,125 fps (22 fps ES!)
180gr FMJ, 8.4gr Longshot @ 1.130": 1,104 fps (28 fps ES)
180gr FMJ, 8.6gr Longshot @ 1.130": 1,128 fps (21 fps ES!)

Brass looked good. Some "bulge" but even the 4.4gr TG load put some bulge in the brass. The chamber support for the newer .40's is quite a bit better than it used to be...not KKM good, but not bad for stock.

From the looks of things, 8.2gr is good enough. .4gr more powder (the 8.6gr load) only averaged 3 fps faster. .2gr more (8.4gr load) actually got slower, which I've seen before when I used to load for the 10mm. All in all, a 180gr bullet moving at 1,125 fps (506 ft-lbs) from a 3.5" barrel is pretty good!

I would imagine it would be a dandy woods load suitable for deer sized game using a good JHP.
__________________
"Condemnation without investigation is the height of ignorance."

Last edited by SDGlock23; 04-10-2013 at 06:31..
SDGlock23 is offline   Reply With Quote
Old 04-14-2013, 13:13   #18
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
Some from the stock G23. All velocities are averages.

TiteGroup:


4.4gr TiteGroup, 180gr FMJ @ 1.125": 951 fps (5 fps extreme spread!) That was using heavier 22lb recoil spring.

4.4gr TiteGroup, 180gr FMJ @ 1.125": 907 fps (4 fps extreme spread!) This was using stock Gen4 RSA, same load but about 45 fps slower with the stock RSA.

200gr Rainier RNFP, 3.8gr TiteGroup @ 1.140": 834 fps (4 fps ES!)

200gr Missouri TCFP, 3.8gr TiteGroup @ 1.140": 874 fps (7 fps ES!!)

800X:

7.0gr 800x, 200gr Nosler JHP @ 1.135": 999 fps (4 fps ES!)

Longshot: I did run a few loads through the G23 but several were not nearly as consistent as others, even wildly so, so I will work on those. However,

8.2gr Longshot, 180gr FMJ @ 1.130": 1,152 fps (42 fps ES)

8.5gr Longshot, 170gr Missouri SWC @ 1.130": 1,246 fps (71 fps ES...not very consistent)

Power Pistol:

8.0gr Power Pistol, 170gr SWC @ 1.125": 1,202 fps (45 fps ES...better than Longshot but higher than typical for PP)

I've got some more loads using VV 3N38 with the G23 than turned out quite well, I'll post those up shortly!
__________________
"Condemnation without investigation is the height of ignorance."
SDGlock23 is offline   Reply With Quote
Old 04-17-2013, 18:17   #19
SDGlock23
Glockoholic
 
SDGlock23's Avatar
 
Join Date: Jan 2005
Location: Land of Forgetfulness
Posts: 7,607
One of my favorite .40 powders, VV 3N38...hard to come by but worth it.

Stock Glock 23 Gen4 (4" bbl):

170gr Missouri SWC, 9.7gr VV 3N38 @ ~1.130": 1,233 fps (21 fps ES!)

180gr RNFP (38-40 hardcast), 9.4gr VV 3N38 @ 1.130": 1,171 fps (6 FPS ES!!)

200gr Beartooth WFNGC, 8.2gr VV 3N38 @ 1.130": 1,061 fps (21 fps ES!)

Very consistent and packs a punch! The 38-40 style RNFP hardcast I feel is a great choice for deep penetration on game. It's got a fairly good sized meplat on it and single digit extreme spreads...almost 1,200 fps with a 180gr from a 4" barrel. From 6" G24 barrel this load does 1,340 fps.

The 200gr Beartooth would be another fantastic hunting bullet. Hopefully somebody can get some use out of this
__________________
"Condemnation without investigation is the height of ignorance."

Last edited by SDGlock23; 04-17-2013 at 18:25..
SDGlock23 is offline   Reply With Quote
Old 04-19-2013, 20:41   #20
happie2shoot
Senior Member
 
Join Date: Jan 2008
Posts: 626
Thank you SDGlock23 for this data, I can't wait to get my barrels and moulds.
happie2shoot is offline   Reply With Quote

 
  
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 15:54.




Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 1,268
338 Members
930 Guests

Most users ever online: 2,244
Nov 11, 2013 at 16:42