Home Forums Classifieds GT Store Blogs Today's Posts Search Social Groups


Glock Talk
Welcome To The Glock Talk Forums.

Thread Tools Display Modes
Old 01-27-2013, 16:10   #1
Junior Member
Join Date: Dec 2012
Posts: 12
Anyone Done A Soapbar Melt On A Glock?

I'd like to square off the rear corners of my Glock 36 and generally do a little melt treatment on it for carry before I have the slide refinished. I've seen it done, but am wondering if anyone has done it and might be willing to share their experiences -- any gotchas, or things to beware of or avoid? Any help you could provide would be much appreciated. Thanks!
Specialized is offline   Reply With Quote
Old 02-06-2013, 10:59   #2
Senior Member
SiGlockBoy's Avatar
Join Date: Mar 2009
Posts: 266
From my experience, you need to go slow and keep things symetrical. This is the hardest part in doing it right and keeping it looking proper and professional. Files, diamond versions, make good work of it. They are in rough to very fine and can be done nice and flat as they are like a little paddle. Clean up with finer and finer as you go. Just keep vigilant about the running lines. You are rounding them over but still need to keep the line or it will look like it off angled and show up terribly with new finish.

Some like a file or even a rotary tool. Once again, it's not the tool used, it's the tool using it. Use it slow and steady and good results can be had with most proceses.

Some like sandpaper or cloth papers but you will need to mount on a flat surface to get edges and corners done straight.

You will go through the tennifer and lose that protection in the areas you need it most.

It will also need to be sand or bead blasted to get a surface texture back on it. Easy enough. Whoever will do the refinish should do that anyway.

Not much too it really. Get some pictures of one done and try and look at every line, curve or corner that was done to give you a guide and keep you getting all the spots.

I personally love the look of Sigs SAS treatment. It looks the smoothest out of any I've seen.

I would love to figure out how a large vibratory cleaner could be used to just hit the spots I want but they wouldn't be too specific. Would do every spot and certainly areas you wouldn't want to touch. Just wishful thinking.

Good luck.
SiGlockBoy is offline   Reply With Quote
Old 02-09-2013, 20:41   #3
Jim S.
Senior Member
Jim S.'s Avatar
Join Date: Dec 2008
Location: Northwest Indiana
Posts: 4,767
I have smoothed out the frames on my Glocks.
I brake the edges, especially around the trigger guard.
I get rid of the finger humps and round the front of the trigger guard and undercut it a bit.
I use sand paper and very fine dremmel sanding drums.
Get it all nice and smooth and then Glass Bead blast it gently to blend everything into a nice satin look.
I've never done anything to the slides other than change the sights to Big Dots.
The Evil Captain Kirk
Jim S. is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -6. The time now is 08:39.

GT Wiki
GT Blogs
Social Groups
GT Store

Users Currently Online: 893
256 Members
637 Guests

Most users ever online: 4,867
May 19, 2015 at 1:03