[jooos]

I just purchased a Mossberg 930 Semi Auto 12 ga I with a muzzle brake, I couldn’t pass it up for the price and I was told the 930 will use a lot of the same aftermarket parts that the 500 uses, so it should be easy to customize. I would like to add a tube extension, pistol grip stock, ghost rings and Picatinny rail.

[crazyasian1]

Originally Posted by Jagman1

Saiga by Tromix.
Thanks Tony !!
Rob.

oh GAWDDANG that is HAWT!!

[AC45ACP]

Details
Carrier Comp Mag Tube
FFT- follower, Hammer, Hand Guards, 3/4 Charging Handle
SA- Rail w/4rd Shell carrier and 2rd carrier..

I'm going to replace the 4rd Carrier for a 8rd and add a Trijicon RMR
Then buy a lot on ammo..

Benelli M4 - YouTube

Benelli M4 - YouTube

[sublime]

My new Remington model 25077, TacStar shell holder and a Scattergun Tech 1 shell extension. I still need to drill the dimples out. My follower must be hitting them because I can still only hold six. Need a light and I'll call it good.



Dead pumpkin

[SAUERGLOCKS]

[QUOTE=sublime;19952033]My new Remington model 25077, TacStar shell holder and a Scattergun Tech 1 shell extension. I still need to drill the dimples out. My follower must be hitting them because I can still only hold six. Need a light and I'll call it good.



Nice 870. I just purchased one myself as would like to see a side shot of the +1 extension if possible. Does it extend past the end of the barrel at all? And how did you go about removing the dimples?

Thanks for any help on these matters.

[ChaseUK02]

Lots of nice HD shottys.

Here's mine, Mossy 500 with ATI pistol/stock, Magpul hand stops and a light/laser combo.

As they say...if it's lit, it's hit.

[canesfan]

Originally Posted by USMC03Grunt

For "tactical" situations, I've never been a big fan of gadgets. I keep mine simple.

Ithaca Model 37? I would love to get my hands on one! Great Gun!

[sublime]

Originally Posted by SAUERGLOCKS

Nice 870. I just purchased one myself as would like to see a side shot of the +1 extension if possible. Does it extend past the end of the barrel at all? And how did you go about removing the dimples?

Thanks for any help on these matters.

Yes, the extension sticks past the end of the barrel by about 3/8" or so. I'd rather it not, but it is what it is. It doesn't look that bad I don't think. I haven't taken care of the dimples yet, but I think I'll try the method where you take a 16 or 17mm socket and run it through the extension, forcing the dimples out.

[SAUERGLOCKS]

Originally Posted by sublime

Yes, the extension sticks past the end of the barrel by about 3/8" or so. I'd rather it not, but it is what it is. It doesn't look that bad I don't think. I haven't taken care of the dimples yet, but I think I'll try the method where you take a 16 or 17mm socket and run it through the extension, forcing the dimples out.

Bingo! That's what I was looking for reference-wise. Thank you. I was afraid of it sticking past the end of the barrel too. Thanks again for the pic.

[SouthpawG26]

I built this 870 way back in 02/03.





Pre production Magpul M93A (named MSS at the time) on an ACE A2 grip/stock adapter (I trimmed the lock as I like to run this at 12"LOP or so),
20" barrel with Vang style elongated forcing cone built by Jon Tank,
Custom top rail (there were no ready made kits at the time),
Aimpoint M2 in an ARMS 22M68 mount,
SGT tritium rear, XS tritium Big Dot front,
Surefire M69 picatinny forend, M900A light, with an unbelievable 900lumen Lumens Factory Led head conversion (and my 500lumen X300 Ultra riding in the lefty-tumbbreak position when not in use on a handgun),
Mesa Tactical Shell holders, 6 left, 4 right,
Jon Tank +3 mag tube extension.

[Zeeman1]

Here's the Winchester I'm working on at the moment. I still have to do a few things like: install the tritium front bead, and bronze mid bead, put the fore end on, and figure out which flashlight to get.
http://i1202.photobucket.com/albums/...k/IMG_5039.jpg
http://i1202.photobucket.com/albums/...k/IMG_5040.jpg
http://i1202.photobucket.com/albums/...k/IMG_5038.jpg

Here are some of the main details:
Winchester 120 Ranger 12 gauge with vent rib barrel from a 1300 (approx. 20") (4 Chokes)
Choate top folding stock
Choate 8 round extension tube
Hogue overmolded fore end
Oversized tritium front bead with bronze mid bead
L&M Mounts 1" flashlight mount

[Roneye]

Here are a couple of my recent builds...

[whitebread]

Originally Posted by Roneye

Here are a couple of my recent builds...

It is good to see someone actually pinning that front sight on. Very nice builds.

[phoenixg23]

Originally Posted by Javelin

Just happened up on this thread and saw your baby. She looks good, hope she keeps treating you well. For me, my wife and I agreed I would not go over $300.00 for a new shotgun so I purchased the Stevens Model 320. It fits the need so far. Now to source a sling for it.
Take it easy

[mongoose808]

Here's mine

[Nalapombu]

Lord have Mercy!!!

These Saiga's are HOT! I've never shot one but I have handled a couple of stock models off the shelf and thought they would be a lot of fun. These custom versions are just unbelievable. I would love to have some trigger time with these babies.

I'm guessing these would go for $1500 or more, wouldn't they? Especially the ones with short Barrels that require the tax stamp. How well do they work with the budget Wally World BOX shotgun shells everyone likes to use?

The only thing is that I would want to hunt hogs with whatever shotgun I get. Some of these wouldn't be capable of that unless you were right up on them. So can you all tell me how accurate some of these builds are with slugs out to 75 or 100 yards or so? Or should I just forget that idea and just get a Saiga and trick it out knowing it is going to be a single use firearm for HD? Not that there's anything wrong with that.

Thanks for the awesome pics guys.

Nalajr

[nolt]

[Tvov]

Originally Posted by nolt

Details, details! Parts, addons, etc!

[wvshootr]

[/IMG]

posted using Outdoor Hub Campfire

[Angry Fist]

Originally Posted by Nalapombu

Lord have Mercy!!!

These Saiga's are HOT! I've never shot one but I have handled a couple of stock models off the shelf and thought they would be a lot of fun. These custom versions are just unbelievable. I would love to have some trigger time with these babies.

I'm guessing these would go for $1500 or more, wouldn't they? Especially the ones with short Barrels that require the tax stamp. How well do they work with the budget Wally World BOX shotgun shells everyone likes to use?

The only thing is that I would want to hunt hogs with whatever shotgun I get. Some of these wouldn't be capable of that unless you were right up on them. So can you all tell me how accurate some of these builds are with slugs out to 75 or 100 yards or so? Or should I just forget that idea and just get a Saiga and trick it out knowing it is going to be a single use firearm for HD? Not that there's anything wrong with that.

Thanks for the awesome pics guys.

Nalajr

They are a hoot. I can hit a paper plate at 100 yards all day long. Plenty good for hogs. Get one while you can!

[Travclem]

My Benellis

[gooffeyguy]

Originally Posted by wvshootr

[/IMG]

posted using Outdoor Hub Campfire

What brand/model sight is that and how do you like it?

[mr00jimbo]

Keepin' it simple: 870 Police Magnum, all stock.

[wvshootr]

Originally Posted by gooffeyguy

What brand/model sight is that and how do you like it?

Its a konus micro red dot i got from Amazon. I didn't want a huge red dot on top but did want something that could stand up to constant punishment of full power 00 and slugs. I love the sight and it holds zero just fine. I highly recommend this sight.

posted using Outdoor Hub Campfire

[SGT HATRED]

I never got around to taking a group photo...