GlockTalk.com
Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.
Reply
 
Thread Tools Display Modes
Old 05-11-2011, 22:13   #26
EOD3
Senior Member
 
EOD3's Avatar
 
Join Date: Oct 2000
Location: Indiana
Posts: 760
I only have one set of Dillon dies because they don't come with a belling die. I load blaster ammo on my 550 but all my precision loading is done on an RCBS Rock Chucker so if you want to move the dies to another press, you'll bave to buy an extra die.

The Lee dies I have are a little too short for the 550b. The RCBS and Hornady dies work like a champ.
__________________
Just my blood alcohol content...
EOD3
EOD3 is offline   Reply With Quote
Old 05-12-2011, 07:22   #27
Colorado4Wheel
Senior Member
 
Colorado4Wheel's Avatar
 
Join Date: Nov 2006
Location: CO
Posts: 14,120
I don't know how old your dies are but any newer Lee dies are plenty long for the 550.
__________________
Steve
Colorado4Wheel is offline   Reply With Quote
Old 05-12-2011, 09:57   #28
PCJim
Senior Member
 
Join Date: Aug 2008
Location: FL
Posts: 2,880
I use Lee dies on a 550b for 380, 9mm, 40, 45 and .223. The Lee dies work well and are plenty long enough. I also use the Lee locknut with its "O" ring and have not had a problem on the toolheads, although space is a bit tight. A good adjustable wrench on the bench is all that is needed.
PCJim is offline   Reply With Quote
Old 05-13-2011, 12:38   #29
EOD3
Senior Member
 
EOD3's Avatar
 
Join Date: Oct 2000
Location: Indiana
Posts: 760
Quote:
Originally Posted by Colorado4Wheel View Post
I don't know how old your dies are but any newer Lee dies are plenty long for the 550.
All of my dies are old with the exception my 10/40 die set (Hornady). The Lee .223 dies I have only engage the lock-ring by about 1 1/2 or two threads.
__________________
Just my blood alcohol content...
EOD3
EOD3 is offline   Reply With Quote
Old 05-13-2011, 14:07   #30
devildogandboy
Member
 
Join Date: May 2011
Posts: 64
Quote:
Originally Posted by High Altitude View Post
I am going to purchase a 550b as my first press reloading 9mm initially.

Should I get the dillon dies or would it be OK to save some money and use lee dies?

Any problem with using the lee dies in the dillon 550b?

i use dillon, rcbs and hornady dies in mine. they all work great, just some die sets may cause you a little extra work. the lees should work also, though i have never used lee.
good luck and enjoy what will be your favorite pastime.
devildogandboy is offline   Reply With Quote
Old 02-03-2013, 14:38   #31
jbremount
Senior Member
 
jbremount's Avatar
 
Join Date: Apr 2005
Location: Texas
Posts: 1,529
I buy the Dillion dies myself. The Dillon seating die is "designed" to seat the bullet straight. That's it's main goal. It will seat your bullet absolutely correct. They don't try to crimp in the seating process. The Dillon crimping die does the crimping . Dillon does not design a die to seat and crimp in the same operation. Dillion does not think it is a sound reloading for a die to seat and crimp in the same operation.

That said, I will exchange the dillion sizing die with a Lee sizing die to size the brass down lower on .40 that has been shot in glock pistols. The Lee die will get the Glock Bludge out of the brass when the dillion will not.
__________________
There's gonna be a lot of slow singin'
and flower bringin'
if my burglar alarm starts ringin'
jbremount is offline   Reply With Quote
Old 02-03-2013, 14:41   #32
G31
Senior Member
 
G31's Avatar
 
Join Date: Jun 1999
Location: Roanoke, VA; Tampa, FL
Posts: 3,362


I run Lee, RCBS, and one set of Redding .300 Win Mag. All work perfectly fine. I'm loading 9, .40, .45, 10mm, .223, 357 SIG, and .300. I have some Lee FCD as well, and like the separate crimp step.
__________________
Never underestimate the powers of stupid people in large groups.

Proudly shooting guns in: .40 S&W, 9mm x 19, .38 Spl, 357 SIG, .45 Auto, 10mm, .22 LR, .22 WMR, .223 Rem, .300 Win Mag, and 12 Ga.
G31 is offline   Reply With Quote
Old 02-03-2013, 20:11   #33
RustyFN
Senior Member
 
RustyFN's Avatar
 
Join Date: Sep 2006
Location: West Virginia
Posts: 3,146
I use all Lee dies on my 550, no problems.
__________________
The torture never stops.
RustyFN is offline   Reply With Quote
Old 02-04-2013, 09:48   #34
ron59
Bustin Caps
 
ron59's Avatar
 
Join Date: Jan 2009
Location: near Charlotte, NC
Posts: 6,750
Quote:
Originally Posted by devildogandboy View Post
i use dillon, rcbs and hornady dies in mine. they all work great, just some die sets may cause you a little extra work. the lees should work also, though i have never used lee.
good luck and enjoy what will be your favorite pastime.
You "woke up" an almost 2 year old thread for this?
1) I imagine he's already had his question answered.
2) These type of questions come up often, but I don't think you really helped anybody here.

But thanks for playing.
__________________
Ron M. ('59 is my birth year)

Quote:
Originally Posted by Boxerglocker View Post
WTF?! How a cheap can an old, the old fart get?!
ron59 is offline   Reply With Quote
Old 02-04-2013, 20:47   #35
PCJim
Senior Member
 
Join Date: Aug 2008
Location: FL
Posts: 2,880
Quote:
Originally Posted by ron59 View Post
You "woke up" an almost 2 year old thread for this?
1) I imagine he's already had his question answered.
2) These type of questions come up often, but I don't think you really helped anybody here.

But thanks for playing.
I wondered why myself, but considering that this question pops up a couple of times each month.....
PCJim is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 02:21.



Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 732
172 Members
560 Guests

Most users ever online: 2,244
Nov 11, 2013 at 11:42