GlockTalk.com
Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.
Reply
 
Thread Tools Display Modes
Old 02-02-2013, 19:50   #26
toshbar
Timber Baron
 
toshbar's Avatar
 
Join Date: Oct 2009
Location: Eastern NC
Posts: 3,979
Tapco G2 single hook. I did grind the sides of the hammer though where the pin goes through because I used to have the bolt hold open.
__________________
1 3 5
├┼┤
Save the Manuals!
2 4 R

toshbar is offline   Reply With Quote
Old 02-02-2013, 21:00   #27
jbremount
Senior Member
 
jbremount's Avatar
 
Join Date: Apr 2005
Location: Texas
Posts: 1,529
Quote:
Originally Posted by toshbar View Post
Tapco G2 single hook. I did grind the sides of the hammer though where the pin goes through because I used to have the bolt hold open.

If you grinded the sides, you now have to fill that space with a washer of similar diameter to the material you took off to keep the hammer in the center.

IMO, best not to grind on the Tapco G2 hammer. You can open up a can of worms if you grind off too much or later take out the BHO lever and use that hammer. Why not use the Saiga's original hammer with the BHO lever. You can't put metal back.
__________________
There's gonna be a lot of slow singin'
and flower bringin'
if my burglar alarm starts ringin'
jbremount is offline   Reply With Quote
Old 02-02-2013, 21:08   #28
toshbar
Timber Baron
 
toshbar's Avatar
 
Join Date: Oct 2009
Location: Eastern NC
Posts: 3,979
Quote:
Originally Posted by jbremount View Post
If you grinded the sides, you now have to fill that space with a washer of similar diameter to the material you took off to keep the hammer in the center.

IMO, best not to grind on the Tapco G2 hammer. You can open up a can of worms if you grind off too much or later take out the BHO lever and use that hammer. Why not use the Saiga's original hammer with the BHO lever. You can't put metal back.
The hammer spring keeps the hammer pretty well centered, even with the missing material at the ends of the pivot sleeve.

I have ground, polished, and welded pretravel and overtravel adjustments on my G2. It's not going anywhere. Worst case, I buy another $25 G2 trigger pack and start over.
__________________
1 3 5
├┼┤
Save the Manuals!
2 4 R

toshbar is offline   Reply With Quote
Old 02-02-2013, 23:11   #29
twag4
Senior Member
 
twag4's Avatar
 
Join Date: Feb 2010
Location: Alabama
Posts: 411
Quote:
Originally Posted by mjkeat View Post
Nice story. How?
He installed the trigger pin above the spring with a twist so that the trigger was still engaged by the spring. It caused the trigger to require a greater amount of force to squeeze it. Also, he had the shepherds hook on top of the hammer pin. It was awkward, and as he put it- "unreasonably difficult to install." I think the shepherds hook was binding with the hammer spring coils too. Anyway, properly positioning everything did the trick.
__________________
Don't retreat...reload
twag4 is offline   Reply With Quote
Old 02-03-2013, 07:05   #30
mjkeat
Senior Member
 
Join Date: Jun 2009
Location: Midwest
Posts: 3,450
Thank you., everyone. I'm going to get it out and see if I can work it out.

Sent from my DROID RAZR using Tapatalk 2
mjkeat is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 11:45.



Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 1,101
326 Members
775 Guests

Most users ever online: 2,244
Nov 11, 2013 at 11:42