GlockTalk.com
Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.

 
  
Reply
 
Thread Tools Display Modes
Old 10-02-2012, 23:49   #1
RM686
Member
 
Join Date: May 2007
Posts: 97
sanding down safety on trigger

Have a new G19 4 gen. changed out trigger for G17 rounded version. Did polish, job 3.5 connector wolf, 6 lb trigger spring. Trigger pull is 4.25 lbs. I still hate the trigger. The safety lever in the trigger cuts into my finger and after 300 rounds this gun is not fun to shoot. Has anyone tried filing the safety on the trigger so when it is pressed it is flush with the trigger. I see Clockworks sells such a trigger with a wider safety and flush when engaged but for $150.00. All my 20 guns both revolvers and semi autos have smooth triggers. WTF was Glock thinking.
Any suggestions?
RM686 is offline   Reply With Quote
Old 10-03-2012, 00:30   #2
Comedian
Senior Member
 
Comedian's Avatar
 
Join Date: Aug 2010
Posts: 976
If you file it, the gun probably wont shoot. Since you will no longer be able to depress it.
__________________
HK VP9
Glock 17 Gen4
S&W M&P 9mm
Comedian is offline   Reply With Quote
Old 10-03-2012, 00:37   #3
RM686
Member
 
Join Date: May 2007
Posts: 97
Quote:
Originally Posted by Comedian View Post
If you file it, the gun probably wont shoot. Since you will no longer be able to depress it.
I would depress it and file off the part still sticking up above the rest of the troger.

Last edited by RM686; 10-03-2012 at 00:38..
RM686 is offline   Reply With Quote
Old 10-03-2012, 00:42   #4
Comedian
Senior Member
 
Comedian's Avatar
 
Join Date: Aug 2010
Posts: 976
Quote:
Originally Posted by RM686 View Post
I would depress it and file off the part still sticking up above the rest of the troger.
Gotcha. I wouldn't do it, but they are cheap to replace if it goes bad.
__________________
HK VP9
Glock 17 Gen4
S&W M&P 9mm
Comedian is offline   Reply With Quote
Old 10-03-2012, 01:23   #5
SJ 40
Senior Member
 
SJ 40's Avatar
 
Join Date: Jan 2011
Location: Vermont
Posts: 8,380
I do on the ones that offend.I usually start out at round 220 grit and finish off with 600 grit. Mind you I am just taking off the amount that doesn't lay flush with the main body of the trigger,in doing so I have never taken off any more that would prevent the safety from functioning in any way other than designed. SJ 40
SJ 40 is offline   Reply With Quote
Old 10-03-2012, 07:16   #6
Opie 1 Kenopie
Regular Guy
 
Opie 1 Kenopie's Avatar
 
Join Date: Jan 2006
Location: Still Stuck in the Suck--Central CA
Posts: 1,877
What was Glock thinking? They thought "We just designed a super-safe pistol with an innovative trigger that could only hurt Cousin Arnold's girlie mans!"

I would NEVER dick with the trigger since its a safety also. For some reason millions of Glock owners aren't injured by their triggers, so maybe you just need a different pistol platform.
__________________
Opie
"You find it offensive? Well I find it funny. That's why I'm happier than you."
Opie 1 Kenopie is offline   Reply With Quote
Old 10-03-2012, 07:19   #7
MNBud
Senior Member
 
MNBud's Avatar
 
Join Date: Feb 2007
Location: suburb of Mpls. Mn.
Posts: 760
Do exactly as RM686 suggested, it is usually the second thing I do to my Glocks after installing TruGlo sights. I put the trigger in the fired position and then use a half round jewelers file to bring the tab flush with the rest of the trigger and then sand it and the ribs with 400 grit emery and then 600 grit. The sanding takes the sharp edges off but doesn't remove a noticeable amount of material. This is a huge improvement and will not affect the operation of the safety. (which in my mind is a joke to start with).
__________________
Just because you know you're paranoid doesn't mean someones not out to get you.

Sub club #622
Certified Glock armorer
MNBud is offline   Reply With Quote
Old 10-03-2012, 07:32   #8
Slackinoff
Senior Member
 
Slackinoff's Avatar
 
Join Date: Sep 2011
Location: Texas
Posts: 454
Quote:
Originally Posted by MNBud View Post
Do exactly as RM686 suggested, it is usually the second thing I do to my Glocks after installing TruGlo sights. I put the trigger in the fired position and then use a half round jewelers file to bring the tab flush with the rest of the trigger and then sand it and the ribs with 400 grit emery and then 600 grit. The sanding takes the sharp edges off but doesn't remove a noticeable amount of material. This is a huge improvement and will not affect the operation of the safety. (which in my mind is a joke to start with).
Great post, thanks.
__________________
It's what people know about themselves inside that makes 'em afraid. -The Stranger-
Slackinoff is offline   Reply With Quote
Old 10-03-2012, 11:42   #9
English
Senior Member
 
Join Date: Dec 2005
Location: London
Posts: 5,843
Quote:
Originally Posted by MNBud View Post
Do exactly as RM686 suggested, it is usually the second thing I do to my Glocks after installing TruGlo sights. I put the trigger in the fired position and then use a half round jewelers file to bring the tab flush with the rest of the trigger and then sand it and the ribs with 400 grit emery and then 600 grit. The sanding takes the sharp edges off but doesn't remove a noticeable amount of material. This is a huge improvement and will not affect the operation of the safety. (which in my mind is a joke to start with).
Only thing to add is that it is easier to start by scraping the trigger safety down with a small sharp knife with the blade at right angles to the surface. The design is indeed very poor ergonomics.

English
English is offline   Reply With Quote
Old 10-03-2012, 12:11   #10
sciolist
Senior Member
 
Join Date: Nov 2009
Location: PNW
Posts: 1,624
+1 for scraping.
sciolist is offline   Reply With Quote
Old 10-03-2012, 12:37   #11
M 7
Senior Member
 
M 7's Avatar
 
Join Date: May 2012
Posts: 1,127
I just use one of my wife's fine emory boards to remove the sharp edges and very slightly reshape the trigger safety. Takes about 15 seconds.
__________________
For those who CCW:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Last edited by M 7; 10-03-2012 at 12:38..
M 7 is offline   Reply With Quote
Old 10-03-2012, 12:43   #12
scccdoc
Senior Member
 
scccdoc's Avatar
 
Join Date: Dec 2011
Posts: 1,390
I have soft hands, and this is not an issue for me. GEESH..................now I'm gonna think about it!......DOC
scccdoc is offline   Reply With Quote
Old 10-03-2012, 16:16   #13
RM686
Member
 
Join Date: May 2007
Posts: 97
Quote:
Originally Posted by scccdoc View Post
I have soft hands, and this is not an issue for me. GEESH..................now I'm gonna think about it!......DOC
Great fix posted by MNBud. It only becomes an issue after maybe 200 to 220 rounds of ammo fired. I have been shooting pistols and revolves for over 50 years usually about 300 or more rounds per range session. I have never had this problem before buying a Glock. Have no problem with accuracy either.When you look at something like Fulcrum triggers which solve this problem starting at $150.00 and do nothing more for this price, I think Glock could have come up with a better design.
If you go to the range and shoot 2 or 3 boxes of ammo then there is no problem.

Last edited by RM686; 10-03-2012 at 16:17..
RM686 is offline   Reply With Quote
Old 10-03-2012, 16:23   #14
dhgeyer
Senior Member
 
Join Date: Jul 2011
Posts: 423
I have never understood the Glock safety trigger concept. It is designed so that you can't pull the trigger unless you pull the trigger. Makes no sense to me.

OK, you can't pull just one side of the trigger, and this might save someone getting it caught in clothing or something. I wonder if it has ever done any good.

What is the thought process really?
dhgeyer is offline   Reply With Quote
Old 10-03-2012, 16:52   #15
RM686
Member
 
Join Date: May 2007
Posts: 97
MNBud YOUR THE MAN. JUST FOLLOWED YOUR INSTRUCTIONS AND MADE MYSELF A $150.00 TRIGGER.
RM686 is offline   Reply With Quote
Old 10-03-2012, 16:53   #16
F106 Fan
Senior Member
 
F106 Fan's Avatar
 
Join Date: Oct 2011
Posts: 6,421
Quote:
Originally Posted by dhgeyer View Post
I have never understood the Glock safety trigger concept. It is designed so that you can't pull the trigger unless you pull the trigger. Makes no sense to me.

OK, you can't pull just one side of the trigger, and this might save someone getting it caught in clothing or something. I wonder if it has ever done any good.

What is the thought process really?
Glock talks about having multiple safeties. But they aren't independent safeties; every one of them is released as the trigger is pulled.

So Glock added a 'master' safety to the trigger to prevent NDs.

Richard
__________________
"No matter how cynical you become, it's never enough to keep up." - Lily Tomlin
F106 Fan is offline   Reply With Quote
Old 10-03-2012, 16:57   #17
dhgeyer
Senior Member
 
Join Date: Jul 2011
Posts: 423
Quote:
Originally Posted by F106 Fan View Post
So Glock added a 'master' safety to the trigger to prevent NDs.

Richard
Right. So you can't deactivate all the dependent safeties by pulling the trigger unless you pull the trigger.
dhgeyer is offline   Reply With Quote
Old 10-03-2012, 17:20   #18
Slackinoff
Senior Member
 
Slackinoff's Avatar
 
Join Date: Sep 2011
Location: Texas
Posts: 454
MNBud and English, Wow. That was easy and it turned out exactly how I wanted it. What a treat.

Thanks.
__________________
It's what people know about themselves inside that makes 'em afraid. -The Stranger-
Slackinoff is offline   Reply With Quote
Old 10-03-2012, 17:21   #19
RM686
Member
 
Join Date: May 2007
Posts: 97
Quote:
Originally Posted by dhgeyer View Post
Right. So you can't deactivate all the dependent safeties by pulling the trigger unless you pull the trigger.
look at the M&P pistols. You pull the bottom half of the trigger to fire? All these triggers were designed by lawyers.
Most discharges occur when holstering a fire arm with your finger in the trigger guard or by some how placing your finger on the trigger and pressing it.
There was a funny story a couple of months ago about a hunter who was shot by his dog. The guy had his rifle leaning against a tree and the dog knocked it over. The trigger got caught on a branch or twig and BOOM shot his master.
Wonder if a dog can shoot a Glock?
RM686 is offline   Reply With Quote
Old 10-03-2012, 17:46   #20
NCHeel
Senior Member
 
NCHeel's Avatar
 
Join Date: Jan 2006
Location: Charlotte N.C.
Posts: 466
I do all of my triggers that way. Sometimes I replace the sport trigger with the smooth trigger but I have found if I sand down the ridges on the sport trigger I can get the trigger to where I like it. I also contour the trigger safety.

If you go to the 10:30 mark of this video you can see how I do mine.

__________________
Gen4 G17, G19, G26. Love the Gen4's.

Glock and S&W M&P Certified Armorer
NRA certified RSO
NRA Instructor for pistol, rifle, shotgun & PPIH and PPOH
NCHeel is offline   Reply With Quote

 
  
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 06:18.




Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 603
157 Members
446 Guests

Most users ever online: 2,672
Aug 11, 2014 at 2:31