Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.

 
  
Reply
 
Thread Tools Display Modes
Old 09-30-2012, 18:09   #1
ABNAK
Senior Member
 
Join Date: Apr 2005
Location: Tennessee
Posts: 664
Keyholing DoubleTap 357Sig

DoubleTap 357Sig rounds (*supposedly* 125gr Sierras but don't look like Sierras) that I personally chrono'd at 1452fps average. However, the ES was 154fps. Maybe that's why the ES was so high, not to mention the accuracy sucking?

What would cause a handgun bullet to keyhole?

Now, before you ask, I checked to rule out barrel causes. I have both a Glock 32 factory barrel as well as a 4" Storm Lake drop-in barrel and it keyholed with both. Checked again by using Cor Bon Sierras, Buffalo Bore GD, and Speer GD, which all gave nice round holes. The DT was in the perfect outline of a bullet profile with just about every round.

More than a little disappointed by DT, as many here have been. Not the velocity in this case but perhaps even worse.





So, just out of curiosity, what would a tumbling 125gr bullet at 1452fps do ballisitcs-wise? No doubt it wouldn't act like a normal HP would, but would it be destructive? Hell, might as well be a tumbling FMJ in that case.
__________________
"...there's a man with a gun over there, tellin' me I got to beware..."

11C2P '83-'87

Last edited by ABNAK; 09-30-2012 at 18:12..
ABNAK is offline   Reply With Quote
Old 09-30-2012, 18:12   #2
Foxtrotx1
Senior Member
 
Foxtrotx1's Avatar
 
Join Date: Jan 2010
Location: Scottsdale AZ
Posts: 4,029
Stay away from the boutique ammo.
__________________
Tin Foil Free Zone.

Eagle Scout.
Foxtrotx1 is offline   Reply With Quote
Old 09-30-2012, 18:15   #3
ABNAK
Senior Member
 
Join Date: Apr 2005
Location: Tennessee
Posts: 664
Quote:
Originally Posted by Foxtrotx1 View Post
Stay away from the boutique ammo.

Unfortunately, they're the only ones who don't water down the 357Sig to mid-1300's. It was designed to replicate the .357 Magnum in it's 125gr loading, and 1350+/- is quite a bit short of that.

But yeah, I'm done with DT.
__________________
"...there's a man with a gun over there, tellin' me I got to beware..."

11C2P '83-'87
ABNAK is offline   Reply With Quote
Old 09-30-2012, 18:16   #4
dkf
Senior Member
 
dkf's Avatar
 
Join Date: Aug 2010
Posts: 4,685
Pull a bullet and measure the diameter with a micrometer. Also look at the amount of crimp on the bullet, should be a slight ring around the bullet with no deformation. Undersized bullet are known to cause stability issues. If the bullets were not Sierras they may be Montana Gold JHPs. Montana Gold usually has quality bullet however their JHP rounds are more for target practice and not SD IMO. Post some pics if you got them.
dkf is offline   Reply With Quote
Old 09-30-2012, 18:21   #5
ABNAK
Senior Member
 
Join Date: Apr 2005
Location: Tennessee
Posts: 664
Quote:
Originally Posted by dkf View Post
Pull a bullet and measure the diameter with a micrometer. Also look at the amount of crimp on the bullet, should be a slight ring around the bullet with no deformation. Undersized bullet are known to cause stability issues. If the bullets were not Sierras they may be Montana Gold JHPs. Montana Gold usually has quality bullet however their JHP rounds are more for target practice and not SD IMO. Post some pics if you got them.
They're not Montana Golds as they don't have that "gold" color. They almost look like Winchester 125gr bullets. Will post a pic soon.
__________________
"...there's a man with a gun over there, tellin' me I got to beware..."

11C2P '83-'87
ABNAK is offline   Reply With Quote
Old 09-30-2012, 19:02   #6
ABNAK
Senior Member
 
Join Date: Apr 2005
Location: Tennessee
Posts: 664
Caliber Corner

Caliber Corner

You can clearly see the difference in the holes (through a cheap hibachi I had in the garage that I knew would show it more decisively than paper). The two DT's are obvious, the other 3 are the BB GD, Speer GD, and CB Sierra.

The bullet on the right is a Cor Bon 125gr Sierra (from back before they made their own bullets like they do now). The one on the left is the *supposed* Sierra loaded by DoubleTap. It's easy to see the DT is NOT a Sierra.

I don't have a bullet puller so I can mic it.
__________________
"...there's a man with a gun over there, tellin' me I got to beware..."

11C2P '83-'87

Last edited by ABNAK; 09-30-2012 at 19:04..
ABNAK is offline   Reply With Quote
Old 09-30-2012, 21:33   #7
dkf
Senior Member
 
dkf's Avatar
 
Join Date: Aug 2010
Posts: 4,685
Yeah they look like Winchester or Remington JHP. I checked their site and they are using Winchester or Remington JHP on other calibers. Seems kinda typical from DT for the last few years. You do not know what you are going to get.

The 115gr Winchester JHP, just slightly shorter than the 124gr. http://www.midwayusa.com/product/139...d-hollow-point

With Winchesters quality over the past couple years I would not be surprised if the bullet is undersized. I pulled a bullet out of WWB .357sig ammo and miced the bullet and it measured .353".

The description does say Sierra but the bullets in the pic sure do not look like Sierras. Guess if you want them right you have to load them yourself.
http://www.doubletapammo.com/php/cat...roducts_id=395

Last edited by dkf; 09-30-2012 at 21:35..
dkf is offline   Reply With Quote
Old 09-30-2012, 22:32   #8
unit1069
Senior Member
 
unit1069's Avatar
 
Join Date: Oct 2007
Location: So. Central US
Posts: 8,836
Quote:
Originally Posted by Foxtrotx1 View Post
Stay away from the boutique ammo.

Yes, that's good advice. I've had both good luck and bad luck with boutique ammo. I'd be dollars ahead had I just stuck with quality American-made ammo and a few foreign rounds like Sellier & Bellot.

The boutique rounds that have worked for me are really no improvement over the big US ammo companies' offerings and typically cost more.
__________________
Rocket Scientist
unit1069 is offline   Reply With Quote
Old 10-01-2012, 09:29   #9
SCmasterblaster
Senior Member
 
Join Date: Sep 1999
Location: Hartford, Vermont
Posts: 16,034
I would inspect the suspect bullet's diameter, as others have said.
__________________
Gun Ownership Offers Freedom in Many Dimensions
SCmasterblaster is offline   Reply With Quote
Old 10-01-2012, 11:50   #10
ABNAK
Senior Member
 
Join Date: Apr 2005
Location: Tennessee
Posts: 664
Quote:
Originally Posted by SCmasterblaster View Post
I would inspect the suspect bullet's diameter, as others have said.
I'll pull one with my buddies bullet puller and mic it later today (hopefully).
__________________
"...there's a man with a gun over there, tellin' me I got to beware..."

11C2P '83-'87
ABNAK is offline   Reply With Quote
Old 10-01-2012, 12:43   #11
SCmasterblaster
Senior Member
 
Join Date: Sep 1999
Location: Hartford, Vermont
Posts: 16,034
Quote:
Originally Posted by ABNAK View Post
I'll pull one with my buddies bullet puller and mic it later today (hopefully).
I would think it unlikely that the bullets are undersized, but that would account for the keyholing . . . .
__________________
Gun Ownership Offers Freedom in Many Dimensions
SCmasterblaster is offline   Reply With Quote
Old 10-01-2012, 19:36   #12
avenues165
Senior Member
 
avenues165's Avatar
 
Join Date: Jun 2012
Location: SLC, Utah
Posts: 428
From what I can see in the photo they look like the Winchester bullet that comes in the WWB 125gr JHP.

That bullet, in my opinion, is a POS for SD. It fragments super bad. Not just a little bit of fragmentation, but full jacket separation and a thin lead disk is what you have left if shooting water jugs. It basically explodes on contact. I saved one, the retained weight is a fraction of 125gr.
avenues165 is offline   Reply With Quote
Old 10-02-2012, 10:42   #13
SCmasterblaster
Senior Member
 
Join Date: Sep 1999
Location: Hartford, Vermont
Posts: 16,034
Quote:
Originally Posted by avenues165 View Post
From what I can see in the photo they look like the Winchester bullet that comes in the WWB 125gr JHP.

That bullet, in my opinion, is a POS for SD. It fragments super bad. Not just a little bit of fragmentation, but full jacket separation and a thin lead disk is what you have left if shooting water jugs. It basically explodes on contact. I saved one, the retained weight is a fraction of 125gr.
If a 125 does that, my 115gr WW JHP +p+ would fragment even worse.
__________________
Gun Ownership Offers Freedom in Many Dimensions
SCmasterblaster is offline   Reply With Quote
Old 10-02-2012, 12:06   #14
dkf
Senior Member
 
dkf's Avatar
 
Join Date: Aug 2010
Posts: 4,685
Quote:
Originally Posted by avenues165 View Post
From what I can see in the photo they look like the Winchester bullet that comes in the WWB 125gr JHP.

That bullet, in my opinion, is a POS for SD. It fragments super bad. Not just a little bit of fragmentation, but full jacket separation and a thin lead disk is what you have left if shooting water jugs. It basically explodes on contact. I saved one, the retained weight is a fraction of 125gr.
I believe it, especially at over 1400fps.
dkf is offline   Reply With Quote
Old 10-02-2012, 16:25   #15
SCmasterblaster
Senior Member
 
Join Date: Sep 1999
Location: Hartford, Vermont
Posts: 16,034
Quote:
Originally Posted by dkf View Post
I believe it, especially at over 1400fps.
My 9mmP 115gr +p+ JHP is doing just over 1400 FPS, and I do expect that the bullet would fragment.
__________________
Gun Ownership Offers Freedom in Many Dimensions
SCmasterblaster is offline   Reply With Quote
Old 10-02-2012, 20:59   #16
avenues165
Senior Member
 
avenues165's Avatar
 
Join Date: Jun 2012
Location: SLC, Utah
Posts: 428
Quote:
Originally Posted by SCmasterblaster View Post
My 9mmP 115gr +p+ JHP is doing just over 1400 FPS, and I do expect that the bullet would fragment.
I'll bet your fine with your load. The 115gr +p+ supposedly has a great street record (I can state for certain because I have not seen the data). The Fed 9BPLE (9mm 115gr +p+) gives fragmentation in gel but also has good penetration, the petals come off and the majority of the bullet weight keeps on going. That load showed a wound cavity in gel that rivals those of 357 sig. Watch it on TNOutdoors9's youtube site.

I am not at all opposed to a little fragmentation, but my experience with that particular bullet in the WWB 125gr 357 sig is that it blows apart after hitting one jug. Just too much fragmentation. I'll see if I can get a photo taken of the wrecked bullet I have from WWB 125gr 357 sig after one water jug. What a mess! I do love it for killing water jugs and bottles, very reactive targets!
avenues165 is offline   Reply With Quote
Old 10-02-2012, 21:24   #17
avenues165
Senior Member
 
avenues165's Avatar
 
Join Date: Jun 2012
Location: SLC, Utah
Posts: 428
Click image for larger version

Name:	bullets_bottom_resized.jpg
Views:	218
Size:	329.8 KB
ID:	228084

Here is a photo of the bullet in question and a few others.
avenues165 is offline   Reply With Quote
Old 10-03-2012, 11:05   #18
SCmasterblaster
Senior Member
 
Join Date: Sep 1999
Location: Hartford, Vermont
Posts: 16,034
Quote:
Originally Posted by avenues165 View Post
Attachment 228084

Here is a photo of the bullet in question and a few others.
Just look at that .357 Sig! It is no surprise that it has such a wicked rep.
__________________
Gun Ownership Offers Freedom in Many Dimensions
SCmasterblaster is offline   Reply With Quote
Old 10-03-2012, 11:51   #19
Tiro Fijo
Senior Member
 
Join Date: May 2011
Posts: 6,281
Quote:
Originally Posted by avenues165 View Post
...I am not at all opposed to a little fragmentation, but my experience with that particular bullet in the WWB 125gr 357 sig is that it blows apart after hitting one jug. Just too much fragmentation...

Water jugs? Expecting to fight Aqua Man? Water jugs are worse than worthless for determining what a bullet will do in a body. What's with the Wally World defense ammo? Surely, you can afford a $30 box of quality defense ammo in .357 SIG. Buy a box of quality ammo and call it a day.
Tiro Fijo is offline   Reply With Quote
Old 10-03-2012, 12:26   #20
dkf
Senior Member
 
dkf's Avatar
 
Join Date: Aug 2010
Posts: 4,685
Quote:
Originally Posted by avenues165 View Post
Attachment 228084

Here is a photo of the bullet in question and a few others.
Squish...

Was the jacket on that 125gr JHP still hanging on or is it loose from the core.
dkf is offline   Reply With Quote

 
  
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 02:46.




Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 535
126 Members
409 Guests

Most users ever online: 2,672
Aug 11, 2014 at 2:31