Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.

 
  
Reply
 
Thread Tools Display Modes
Old 09-16-2012, 18:02   #1
el_dudarino
Registered User
 
Join Date: Sep 2012
Posts: 3
new Glock 29 problems / failures

First, after considerable searching I still can't figure out what BTF means. Any help or link to a really good acronym list?

Now down to my first Glock experience: a recently purchased, new g29 10mm with three problems.

1. Slide does not smoothly enter battery. It hangs with about 1/8th inch to go and requires more than normal force to completely close. Yes, it closes releasing from full open and while firing, but what might be causing it to hang? Perhaps it's contributing to issue #3? Other large frame Glocks I've checked out enter battery much more smoothly while slowly closing the slide. It still happens with a stiffer recoil spring.

2. After ~300 rounds the slide stopped locking open reliably after emptying a magazine. I eliminated the possibility of my thumb touching the lever while firing. Pulling the slide back several times with the empty mag still inserted still failed to lock the slide back. Holding it open and peering into the chamber revealed the slide stop lever slipped off the top, and ended up wedged beside, the follower. This occurs with all three new magazines.

3. Many, many FTF of Underwood 180 grain 1300 fps TMJ ammo. Again, occurs with all three magazines. This is excellent ammo with 5-star reviews and great pricing, so I really hate to think that I simply can't use it in my gun.

Last edited by el_dudarino; 09-16-2012 at 19:35.. Reason: corrected part name
el_dudarino is offline   Reply With Quote
Old 09-16-2012, 20:54   #2
cciman
Senior Member
 
cciman's Avatar
 
Join Date: Jan 2009
Location: SW Ohio
Posts: 2,498
FTRTB= failure to return to battery

1- If only happens when slow hand cycling, then solution= stop hand cycling. This is common with the subcompact, hi cap mags-- rounds are tightly squeezed with good mag spring pressure. You need a slingshot, or firing to make it work. If this is happening during shooting, then it is a FTRTB.

2- check the install of the slide stop (have you detail stripped it?)-- make sure the spring is installed correctly, and the pin is positioned correctly. Does it snap back, when you flick it up with the slide off, and does it have ~1/16" fore/aft travel (spring needs to sit in the pin groove) <-- desirable.

3- gun cannot read ratings, and does not care what other guns perform with x ammo. Use what works for your g29.

Quote:
Originally Posted by el_dudarino View Post
First, after considerable searching I still can't figure out what BTF means. Any help or link to a really good acronym list?

Now down to my first Glock experience: a recently purchased, new g29 10mm with three problems.

1. Slide does not smoothly enter battery. It hangs with about 1/8th inch to go and requires more than normal force to completely close. Yes, it closes releasing from full open and while firing, but what might be causing it to hang? Perhaps it's contributing to issue #3? Other large frame Glocks I've checked out enter battery much more smoothly while slowly closing the slide. It still happens with a stiffer recoil spring.

2. After ~300 rounds the slide stopped locking open reliably after emptying a magazine. I eliminated the possibility of my thumb touching the lever while firing. Pulling the slide back several times with the empty mag still inserted still failed to lock the slide back. Holding it open and peering into the chamber revealed the slide stop lever slipped off the top, and ended up wedged beside, the follower. This occurs with all three new magazines.

3. Many, many FTF of Underwood 180 grain 1300 fps TMJ ammo. Again, occurs with all three magazines. This is excellent ammo with 5-star reviews and great pricing, so I really hate to think that I simply can't use it in my gun.
cciman is offline   Reply With Quote
Old 09-16-2012, 21:02   #3
JimIsland
Senior Member
 
Join Date: Aug 2011
Location: Charleston,SC
Posts: 1,007
What Gen and have you triedany other ammo??
JimIsland is offline   Reply With Quote
Old 09-16-2012, 22:09   #4
el_dudarino
Registered User
 
Join Date: Sep 2012
Posts: 3
1. This happens even without ammo/mag. I only bring it up because it's different than other large frame glocks I've handled. Probably a non-issue, but maybe someone has other information.
2. A smith is checking out the slide stop lever, which appears to have more lateral movement than normal. Also, the magazine followers are considerably different than g30's, which don't exhibit the problem in my g29. Now a waiting game...
3. Gen 3. No feeding problems with 4 other brands, but have only shot those in small quantities (as few as 5 bullets, as many as 100 Win silvertips). If I have to stay away from the Underwood, so be it. Just disappointing since other g29 owners seem to handle it fine.
el_dudarino is offline   Reply With Quote
Old 09-17-2012, 06:30   #5
Glockrunner
HOOYA DEEPSEA
 
Glockrunner's Avatar
 
Join Date: Sep 2001
Location: SC
Posts: 4,792
Send a message via Yahoo to Glockrunner
Quote:
Originally Posted by el_dudarino View Post
First, after considerable searching I still can't figure out what BTF means. Any help or link to a really good acronym list?

Now down to my first Glock experience: a recently purchased, new g29 10mm with three problems.

1. Slide does not smoothly enter battery. It hangs with about 1/8th inch to go and requires more than normal force to completely close. Yes, it closes releasing from full open and while firing, but what might be causing it to hang? Perhaps it's contributing to issue #3? Other large frame Glocks I've checked out enter battery much more smoothly while slowly closing the slide. It still happens with a stiffer recoil spring.

2. After ~300 rounds the slide stopped locking open reliably after emptying a magazine. I eliminated the possibility of my thumb touching the lever while firing. Pulling the slide back several times with the empty mag still inserted still failed to lock the slide back. Holding it open and peering into the chamber revealed the slide stop lever slipped off the top, and ended up wedged beside, the follower. This occurs with all three new magazines.

3. Many, many FTF of Underwood 180 grain 1300 fps TMJ ammo. Again, occurs with all three magazines. This is excellent ammo with 5-star reviews and great pricing, so I really hate to think that I simply can't use it in my gun.
BTF = ?????

You didn't say the pistol was brand new or, just new to you.
"new g29 10mm" so I am going to assume it is brand new in the box.

1. Several reasons your slide may be having problems
- You may be riding the slide with your hand
- Slide rails and slide dirty requiring cleaning and lube
- dirty chamber/dirty or poor ammo
- magazine spring tension too high, (common in new mags)
- Verticle extention on the triggerbar hitting the barrel of rubbing the underside of the slide

2. Slide won't lock back on empty mag
- dirty slide rails and slide
- poor ammo performance
- Magazine spring too weak or dirty mag.

Gotta go, much of what you need can be found on GlockTalk with simple searches..........
__________________
"As an OK State Trooper once told me, "Why shouldn't a "good" citizen be allowed to carry a gun, all the "bad" guys already do.""
Certified Glock Armorer
Glockrunner is offline   Reply With Quote

 
  
Reply


Tags
failure, follower, g29, problem, slide lock back
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 04:08.




Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 808
166 Members
642 Guests

Most users ever online: 2,672
Aug 11, 2014 at 2:31