Home Forums Classifieds GT Store Blogs Today's Posts Search Social Groups


Glock Talk
Welcome To The Glock Talk Forums.

Thread Tools Display Modes
Old 08-04-2012, 07:46   #1
Registered User
Join Date: Apr 2012
Location: Lone Star State
Posts: 5
Send a message via Skype™ to amilliron
Getting to max load?

Hey all!

I've been loading the 10mm for a while now for my G29sf using my Blue Dot powder that I have sitting around. I normally load 180gr hollow point over 10.4gr of BD using a CCI 300 primer.

I've been reading around and looking at different recipes, and wanted to try the combo with the CCI 350 mag primers. I recently loaded 180gr Speer GDHP over 10.0gr BD with CCI 350. These were probably the hottest loads I shot through the G29 and I didn't shoot many.

I am not getting smileys, but there is a definite case deformation at the throat of the chamber, and I am not getting any primer push or burn out. I am assuming that this is just about the max that I can shoot these loads at?

The other thing is that I also seem to be getting a lot of unburned powder blown out of the barrel, so even with the magnum primer I'm not getting complete burn. Part of my thinking was that the magnum primer, being more spark, will burn more of the powder in the shorter barrel of my glock. Is there a way, besides just repetitive testing, to know where the max burn load is so that all of the powder is being consumed?

amilliron is offline   Reply With Quote
Old 08-04-2012, 10:07   #2
Ret. Fireman
_The_Shadow's Avatar
Join Date: Jul 2007
Location: Southeast, LoUiSiAna
Posts: 4,457
Blue Dot likes to be run HOT to get the best burn from it. Blue Dot also works better from longer barrels. I see a few flakes with my Glock 29 using lighter loads but most of it burns better on the upper end loads. I have used CCI 350's with many loads to obtain a better ignition but bullet tension helps the most.

I load the 200 XTP over 10.5 grains Blue Dot CCI350 COAL 1.260", as a hot load for mine with accetable case expansion (NO Smiley) from the stock G-29 barrel.

Power Pistol gave better velocities from the short barrel using less powder.
Southeast, LoUiSiAna
NRA Life Member
BASS Life Member
_The_Shadow is offline   Reply With Quote
Old 08-04-2012, 12:27   #3
Senior Member
Join Date: Nov 2011
Location: PRK
Posts: 2,242
For my G29SF, I have loaded up to 11.0 grs of BD over 180gr FMJ's and XTP's using both WLP and CCI 350's, no issues other than primers just starting to flow and some extractor rash. Case heads are definitely bulged but no smiles. A very accurate load, stout but not nuclear.
WeeWilly is offline   Reply With Quote
Old 12-07-2012, 09:24   #4
Registered User
Join Date: Apr 2012
Location: Lone Star State
Posts: 5
Send a message via Skype™ to amilliron
Wow, sorry it took me this long to reply. I really appreciate the feedback guys! About the time I posted this my engineering classes piled up, just now getting through finals and resurfacing!! I'll have to do some reloading over the upcoming break....
amilliron is offline   Reply With Quote


10mm, g29
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -6. The time now is 10:54.

GT Wiki
GT Blogs
Social Groups
GT Store

Users Currently Online: 1,057
266 Members
791 Guests

Most users ever online: 4,535
Mar 26, 2015 at 13:43