What Knife Do You Use/Carry? - Page 17

***Angry Fist*** · 07-12-2012, 15:37

Got my ESSE 5-OD today. On my hip now. Pics later.

**NeverMore1701** · 07-12-2012, 15:51

Quote:

Originally Posted by Magnus2131

Probable would want a ZT302 but I just love my new ZT301.

I originally wanted a 302, but simply couldn't find one for a comparable price when I was ready to get one, so a 301 it was. I'm not too torn up about it anymore

Quote:

Originally Posted by SGT HATRED

I got a package in the mail today

I probably won't carry the minimalist for EDC but the kiwi3 will be on me all the time

I love my Minimalist and it's recently acquired big brother, the SPEW (stupid damn name...).

Also, the higher end Minimalists are just awesome, but just a bit much for what they are. I'll still probably end up with one someday, they're about the same price as the Benchmades I've been buying recently. I like the little Baby Bears too.

http://www.gpknives.com/alan-folts.h...a4528da4b52dfe

Johnspark · 07-12-2012, 16:01

I had been working with the Benchmade Griptilian, but I'd been eyeballing this thing for a while.

I finally got one at a good price, so I made the move. It's still getting broken in, but I'm loving it. It really fits my hand well and locks up tight. Those scales are G10. I love Benchmades

10-32 · 07-12-2012, 16:05

Kershaw Clash

I have several and always have one on me.

It's a good knife, and they're cheap so if one gets messed up/lost, it's no big deal

**NeverMore1701** · 07-12-2012, 16:16

Quote:

Originally Posted by Johnspark

I had been working with the Benchmade Griptilian, but I'd been eyeballing this thing for a while.

I finally got one at a good price, so I made the move. It's still getting broken in, but I'm loving it. It really fits my hand well and locks up tight. Those scales are G10. I love Benchmades

I've been tempted, but can't get past the skull logo.

Stupid, I know.

**NeverMore1701** · 07-12-2012, 16:22

Once I get a proper edge on this it'll be added to the rotation:

Magnus2131 · 07-12-2012, 16:53

Quote:

Originally Posted by NeverMore1701

I originally wanted a 302, but simply couldn't find one for a comparable price when I was ready to get one, so a 301 it was. I'm not too torn up about it anymore

First time I seen Gibbs use one on NCIS I fell in love with it. Like you I could not find one priced like the 301

**NeverMore1701** · 07-12-2012, 17:00

Quote:

Originally Posted by Magnus2131

First time I seen Gibbs use one on NCIS I fell in love with it. Like you I could not find one priced like the 301

Can always take that left side off and hit it with some Krylon

***Angry Fist*** · 07-12-2012, 17:27

Quote:

Originally Posted by NeverMore1701

I've been tempted, but can't get past the skull logo.

Stupid, I know.

What's wrong with skull logos?

**NeverMore1701** · 07-12-2012, 17:30

Quote:

Originally Posted by Angry Fist

What's wrong with skull logos?

People like you like 'em

***Arquebus12*** · 07-12-2012, 17:58

Quote:

Originally Posted by NeverMore1701

Once I get a proper edge on this it'll be added to the rotation:

I have one of those, too, identical to yours. Superlative piece of cutlery, using exemplary steel... even the handle finish is holding up nicely after 6 years of steady use.

Started a new job, this is my daily carry knife as a result. Emerson CQCBT-7, non-serrated, non-wave, black ti finish.

**NeverMore1701** · 07-12-2012, 18:03

Quote:

Originally Posted by Arquebus12

I have one of those, too, identical to yours. Superlative piece of cutlery, using exemplary steel... even the handle finish is holding up nicely after 6 years of steady use.

Started a new job, this is my daily carry knife as a result. Emerson CQCBT-7, non-serrated, non-wave, black ti finish.

Only thing I don't like about it is the pocket clip. Way too big and ugly for such an elegant blade.

***syntaxerrorsix*** · 07-12-2012, 18:17

Quote:

Originally Posted by NeverMore1701

Only thing I don't like about it is the pocket clip. Way too big and ugly for such an elegant blade.

They can be replaced. I've got a few Emerson made satin clips that dress it up. One has a skull and crossbones... I can post up pictures if your interested.

**NeverMore1701** · 07-12-2012, 19:00

Quote:

Originally Posted by syntaxerrorsix

They can be replaced. I've got a few Emerson made satin clips that dress it up. One has a skull and crossbones... I can post up pictures if your interested.

I already e-mailed BM about getting one like's on my Kulgera.

WI_DeerHunter13 · 07-12-2012, 19:18

Small sebenza 21 w/ micarta inlays. Smooth as silk and sharp as a scalpel.

Johnspark · 07-12-2012, 21:03

Quote:

Originally Posted by NeverMore1701

Once I get a proper edge on this it'll be added to the rotation:

I had that one in black. It's a bit to narrow for my hand so I gave it to my son.

I have no problem with the logo on the BC. I just hate seeing it on Toyota Camrys.

Magnus2131 · 07-12-2012, 22:40

Quote:

Originally Posted by NeverMore1701

Can always take that left side off and hit it with some Krylon

Don't like it that much more. The more I look at it, the more I like it. It's all your fault for posting it again.

**NeverMore1701** · 07-12-2012, 22:49

Quote:

Originally Posted by Magnus2131

Don't like it that much more. The more I look at it, the more I like it. It's all your fault for posting it again.

Always happy to help

***Travclem*** · 07-13-2012, 00:01

Quote:

Originally Posted by NeverMore1701

I've been tempted, but can't get past the skull logo.

Stupid, I know.

I had one. It sucked. I gave it away.

**NeverMore1701** · 07-13-2012, 00:09

Quote:

Originally Posted by Travclem

I had one. It sucked. I gave it away.

That bad?! Damn.

***Travclem*** · 07-13-2012, 00:29

Quote:

Originally Posted by NeverMore1701

That bad?! Damn.

Probably my least favorite Benchmade ever. Between the uncomfortable handle and the ghey bone collector crap there was not much to like. The handle is also huge compared to the blade.

**NeverMore1701** · 07-13-2012, 00:30

Quote:

Originally Posted by Travclem

Probably my least favorite Benchmade ever.

Eeesh. Glad the logo kept me away!

wrangler_dave9 · 07-13-2012, 01:31

Kershaw Model 1670 Spring assisted tanto point folder. Available from your local Wally Mart for around $60 or so. It sits in my back pocket every day, and on my nightstand with a flashlight at night.

Being an American. My greatest blessing.

windplex · 07-13-2012, 08:42

Quote:

Originally Posted by NeverMore1701

...

...

Also, the higher end Minimalists are just awesome ....

http://www.gpknives.com/alan-folts.h...a4528da4b52dfe

what is the idea behind the straight edge blades? What advantages? thank you!

***Arquebus12*** · 07-13-2012, 10:20

Typically, a straight edge (or Wharncliffe) design is primarily for long, straight type cutting tasks. Think of planing wood, or beard shaving, that kind of thing... I mentioned carrying a tanto-style blade earlier for work, its handy for cutting straps and boxes, stripping wires, etc., along with being a good scraping tool.

That said, straight edged knives that have a pronounced taper like you saw in the pic you posted are better at straight penetration (read: stabbing), while being less than ideal for slashing-type maneuvers. It'll work, but not as well as a knife with a belly or rounded profile.

Short answer: it's just a trend in cutlery right now, and I'm liking it. It's also a preference by individuals, too.