Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.

 
  
Reply
 
Thread Tools Display Modes
Old 03-10-2012, 11:37   #241
kodiakpb
Senior Member
 
kodiakpb's Avatar
 
Join Date: Jan 2012
Posts: 2,085
Will do, I need to wait until the wife gets done selling girl scout cookies so she can come back and watch the monkeys before I can go. Will check in this evening.
kodiakpb is offline   Reply With Quote
Old 03-10-2012, 17:39   #242
bentbiker
NRA Member
 
bentbiker's Avatar
 
Join Date: Sep 2009
Location: Orange County, CA
Posts: 4,552
Gen4 G19, test-fire date of 1/30/12, with milling by Glockworx. No issues in first 300 rds. General Glocking


For comparison, this is Gen3 G19 from 2009 (3200 rds), milling by GT member Mark Housel while working for TSD, which has has been perfect as well.
General Glocking

Last edited by bentbiker; 03-10-2012 at 17:41..
bentbiker is offline   Reply With Quote
Old 03-10-2012, 19:36   #243
kodiakpb
Senior Member
 
kodiakpb's Avatar
 
Join Date: Jan 2012
Posts: 2,085
Back from the range. Put an additional 300xFederal Champion & 100xWWB. Had to slow myself down because I was going through it quick. Zero issues, not one piece of brass touched me, all ejected properly with authority. That's 1000 through it so far (all WWB & FED)....I take that back...that's 1020 through it because I also shot some carry ammo today. Super happy with it. The G26 Gen 4 is equally as reliable. Going to see if I can sneak out again tomorrow.

Hey Bentbiker, that's a sweet setup. How tall are your BUIS's on the Gen 4?

Edit: .220?

Last edited by kodiakpb; 03-10-2012 at 19:39..
kodiakpb is offline   Reply With Quote
Old 03-10-2012, 19:45   #244
bw77
Senior Member
 
bw77's Avatar
 
Join Date: Mar 2006
Location: florida
Posts: 318
Gen 4 G17
Bought used last year from a GT forum member,( Thanks alot buddy )

manufacture date October 2010

B. I have ejection problems with this handgun

FTE's and erratic ejecting at my forehead

Finally sent it off to Glock last week for repair. Will report back when it gets back home.

On a side note, So far I'm really impressed with Glock's customer service. I emailed them about the problem and they actually called me the next day! Less than 24hr response. They are fixing it on their dime. I had to pay shipping though because the gun was more than a year old. I'm ok with that. I hope this gets fixed right, I really like this gun. It's so fast shooting and very accurate.
bw77 is offline   Reply With Quote
Old 03-11-2012, 09:21   #245
JeffSievers
Registered User
 
Join Date: Feb 2012
Posts: 7
I've called their customer service recently to take care of the RSA exchange on my G19 Gen 4 but I'd like to be able to email Glock Customer Service, I rather do e-mail than talk on the phone sometimes. Can someone provide Glock's Customer Service Email address? Thanks,
JeffSievers is offline   Reply With Quote
Old 03-11-2012, 09:35   #246
bw77
Senior Member
 
bw77's Avatar
 
Join Date: Mar 2006
Location: florida
Posts: 318
Quote:
Originally Posted by JeffSievers View Post
I've called their customer service recently to take care of the RSA exchange on my G19 Gen 4 but I'd like to be able to email Glock Customer Service, I rather do e-mail than talk on the phone sometimes. Can someone provide Glock's Customer Service Email address? Thanks,

You can send an email to them with this form. Select warranty department. They never emailed me back though, I got a call from them less than 24hrs after I emailed them explaining my problem.

http://us.glock.com/customer-service/contact-us
bw77 is offline   Reply With Quote
Old 03-11-2012, 09:39   #247
tpr7304
Senior Member
 
Join Date: Jan 2006
Location: Pennsylvania
Posts: 526
Gen4 Glock 19 - no problems.
tpr7304 is offline   Reply With Quote
Old 03-11-2012, 09:53   #248
newbs
Member
 
newbs's Avatar
 
Join Date: Feb 2012
Location: Cincinnati, OH
Posts: 38
Quote:
Originally Posted by bw77 View Post
Finally sent it off to Glock last week for repair. Will report back when it gets back home.
I'll be anxious to see your report. I sent my Gen 4 G19 back and got it back this week. Still shoots about the same. My Gen 4 G23 shoots great, though. I'm not sure I can afford to keep both. But I don't want to dump a problem on someone else, so I think I'll shoot it for a while and if it doesn't improve, I'll send it back again.


Sent with Outdoor Hub mobile on iPhone
newbs is offline   Reply With Quote
Old 03-11-2012, 10:04   #249
bw77
Senior Member
 
bw77's Avatar
 
Join Date: Mar 2006
Location: florida
Posts: 318
Quote:
Originally Posted by newbs View Post
I'll be anxious to see your report. I sent my Gen 4 G19 back and got it back this week. Still shoots about the same. My Gen 4 G23 shoots great, though. I'm not sure I can afford to keep both. But I don't want to dump a problem on someone else, so I think I'll shoot it for a while and if it doesn't improve, I'll send it back again.


Sent with Outdoor Hub mobile on iPhone
I really hope mine gets fixed since I had to pay for shipping. I bought mine used so I know how it feels to get a problem dumped on you. You could always be honest with the buyer and advertise it at a reduced rate if you really want to get rid of it.
bw77 is offline   Reply With Quote
Old 03-11-2012, 13:00   #250
bentbiker
NRA Member
 
bentbiker's Avatar
 
Join Date: Sep 2009
Location: Orange County, CA
Posts: 4,552
Quote:
Originally Posted by kodiakpb View Post

Hey Bentbiker, that's a sweet setup. How tall are your BUIS's on the Gen 4?

Edit: .220?
Sounds like you think, as do I, in terms of height above the slide. I measure about .256" (6.5mm). Lest anyone be confused, this is taller than the std 6.5mm Glock sights, since Glock measures from the top of the sight to the bottom of the dovetail; on the front sight, they measure the height above the slide.

While I like the look of the lower Glockworx sights and the fact that they are flush with the back of the slide, they are not an exact co-witness. POA with the BUIS is about 2" lower than POI. However, for emergency BUIS at SD distance, and their primary function of finding the dot, I'm sure they will be fine. Besides, Ameriglo has discontinued their suppressor sights, so I couldn't get the same sights as on the Gen3.
bentbiker is offline   Reply With Quote
Old 03-11-2012, 13:45   #251
MadCityJack
Senior Member
 
Join Date: Jan 2012
Location: Central Wisconsin
Posts: 165
<b>Let's do a quick survey. Gen4 Glock owners only please:

1. Which model(s) do you own? G-19, Gen 4 (test fired 9/14/2011)

2. Which fits your situation:
A. I have no problem with this handgun
B. I have ejection problems with this handgun
C. I had ejection problems, Glock (or armorer) fixed it, and it now rocks. Only fired 100 rounds through it since fixed.
D. I had ejection problems, Glock (or armorer) fixed them, but it still isn't right.
3. Notes/comments regarding your situation and your thoughts on this issue.</b>
MadCityJack is offline   Reply With Quote
Old 03-11-2012, 13:53   #252
tattooedcop
1 day away....
 
tattooedcop's Avatar
 
Join Date: Sep 2003
Location: Right outside of New Orleans
Posts: 44
I have a gen 4 22,23, and 2 gen 4 17s. The g22&23 were purchased prior to July 2011. The 17s have been purchased since the first of the year.

No issues with any or the 4. The 22 and one 17 are duty guns for edc on duty and the 23 is my ccw/off duty gun. The other 17 is just cause.




Outdoor Hub mobile, the outdoor information engine
__________________
The beatings will continue until moral improves!
tattooedcop is offline   Reply With Quote
Old 03-11-2012, 17:42   #253
stryker1
Registered User
 
stryker1's Avatar
 
Join Date: Mar 2012
Posts: 10
2 gen 4 17s 0 problems 1gen 4 35 no problems
__________________
si vis pacem parabellum
stryker1 is offline   Reply With Quote
Old 03-11-2012, 17:50   #254
dooga
New to Glocks
 
dooga's Avatar
 
Join Date: Mar 2011
Location: Arlington, VA
Posts: 578
Blog Entries: 1
Send a message via AIM to dooga Send a message via MSN to dooga Send a message via Yahoo to dooga Send a message via Skype™ to dooga
1. Which model(s) do you own?
Glock 26

2. Which fits your situation:
A. I have no problem with this handgun:
No problem that bothers me

B. I have ejection problems with this handgun
I have gotten some brass in my face. Is that a Gen 4 problem? A problem with the Gen 4 26 in particular? Is there and ejector recall?

C. I had ejection problems, Glock (or armorer) fixed it, and it now rocks.
Not sure I have a problem.

D. I had ejection problems, Glock (or armorer) fixed them, but it still isn't right.
N/A

3. Notes/comments regarding your situation and your thoughts on this issue.
Was there any issue with any Gen 4 26s?

PS: For what it's worth, my 26's brass date is 01/27/11. How do I check my extractor type?
__________________
Gen 1 G17, LWS32, CZ 452 Special Military Training

Last edited by dooga; 03-11-2012 at 17:56..
dooga is offline   Reply With Quote
Old 03-11-2012, 17:52   #255
1-2man
Part Time
 
1-2man's Avatar
 
Join Date: Sep 2006
Location: Lost
Posts: 4,352
Shot 410 rounds through my new Gen 4 G-19. Zero issues. A few pieces of brass to the head on one hand and weak hand shooting (also happens with my other Glocks if I don't have a firm grip.) All with my personal light reloads.
1-2man is offline   Reply With Quote
Old 03-11-2012, 18:05   #256
kodiakpb
Senior Member
 
kodiakpb's Avatar
 
Join Date: Jan 2012
Posts: 2,085
Went back to the range again today. The 19 is continuing to perform flawlessly. I used Fed Champion today. My 26 is the same way.
kodiakpb is offline   Reply With Quote
Old 03-11-2012, 19:11   #257
jmathis84
Member
 
Join Date: Sep 2010
Location: South GA
Posts: 99
250 rounds downrange now in my g22. No issues whatsoever. All brass landed nicely in a pile at 3'o clock.
jmathis84 is offline   Reply With Quote
Old 03-27-2012, 23:30   #258
Obscura101
Registered User
 
Join Date: Mar 2012
Posts: 5
1. Which model(s) do you own?

G17, Gen 4

2. Which fits your situation:

B. I have ejection problems with this handgun


3. Notes/comments regarding your situation and your thoughts on this issue.

It's a pain in the ass but it's a great shooting gun so I will give it a chance. An armorer is looking at it and hopefully will have it fixed soon.
Obscura101 is offline   Reply With Quote
Old 03-28-2012, 03:40   #259
bw77
Senior Member
 
bw77's Avatar
 
Join Date: Mar 2006
Location: florida
Posts: 318
Quote:
Originally Posted by bw77 View Post
Gen 4 G17
Bought used last year from a GT forum member,( Thanks alot buddy )

manufacture date October 2010

B. I have ejection problems with this handgun

FTE's and erratic ejecting at my forehead

Finally sent it off to Glock last week for repair. Will report back when it gets back home.

On a side note, So far I'm really impressed with Glock's customer service. I emailed them about the problem and they actually called me the next day! Less than 24hr response. They are fixing it on their dime. I had to pay shipping though because the gun was more than a year old. I'm ok with that. I hope this gets fixed right, I really like this gun. It's so fast shooting and very accurate.
The gun just got back yesterday and I'm picking it up from FedEX this afternoon. I'll have to wait till the weekend to shoot it though. will report back with my results.
bw77 is offline   Reply With Quote
Old 03-28-2012, 06:11   #260
Pops 1
Senior Member
 
Join Date: Mar 2005
Location: Central Louisiana
Posts: 1,489
Gen4 G22 no problems.
Pops 1 is offline   Reply With Quote

 
  
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 01:09.




Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 765
172 Members
593 Guests

Most users ever online: 2,672
Aug 11, 2014 at 2:31