Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.

 
  
Reply
 
Thread Tools Display Modes
Old 10-01-2011, 14:10   #1
ptmccain
Silver Membership
Senior Member
 
ptmccain's Avatar
 
Join Date: Nov 2010
Location: Missouri
Posts: 605
Ruger SR1911 - MAJOR DISAPPOINTMENT

Well, I took the Ruger SR1911 out to the range today, and shot it for the first time, putting it through its paces. What a major disappointment.

I've been reading here from "experts" that this thing is bound to be a piece of junk, sure to fail, go bad, do something wrong, or be wildly inaccurate, in other words, surely, Ruger's first attempt at a 1911 will be a bad one, or one only half-way well done.

It performed flawlessly, through over 400 rounds, not a single misfeed, FTF, or FTE. Nothing, and I tried my best to get it to stutter and cough. It would not hear of it. Unlike my Springfield Loaded through its first few hundred rounds, the Ruger SR1911 had not a single issue.

I stripped one off the mag and had one in the chamber and shoved the magazine back in fully loaded...perfect performance. I used four different magazines with it, Ruger's own 8 and 7 rounder, that it came with, some relative inexpensive Kimbers, a bunch of Kimber Pro-Tac and one Wilson ten round magazine. Again, I was disappointed that it performed flawlessly with each magazine. I shot it as fast as I could through four magazines in a row, one right after the other...flawless.

Sure, however, I thought...using the least expensive crappy ammo I could find would be its undoing. I just knew the "experts" had to be right. But, again, disappointment. Shooting the cheapest FMJ brass ammo I could find, from some Hungary or Czechoslovakia company...400 rounds, no problems.

I was so disappointed, I have posted a series of range reports showing you how it failed to live up to the negative predictions of experts.

At 25 feet, from a bench rest, I shot a one inch group, at 25 yards, put them into about a two inch group and at 50 yards, I got most of the shots in the black on the bulls-eye target.

How can I trust the "experts" who predicted my Ruger SR1911 would be so bad?

Here are the videos:
Part One
http://www.youtube.com/watch?v=funnWctU7hw&hd=1
Part Two
http://www.youtube.com/watch?v=5w0fxKIhNJQ&hd=1
Part Three
http://www.youtube.com/watch?v=S7OTd-pCk08&hd=1
Part Four
http://www.youtube.com/watch?v=E0-xEtPYbJA&hd=1
Part Five
http://www.youtube.com/watch?v=sPrrsbpcmmg&hd=1
Part Six
http://www.youtube.com/watch?v=HSe2xW8mzj4&hd=1
Part Seven
http://www.youtube.com/watch?v=_6tH9yIeY-4&hd=1
__________________

Verbum Domini Manet in Aeternum


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Last edited by ptmccain; 10-02-2011 at 17:07..
ptmccain is offline   Reply With Quote
Old 10-01-2011, 14:26   #2
okie
GT Mayor
 
okie's Avatar
 
Join Date: Oct 2001
Location: Muskogee Ok.
Posts: 129,520


I think that you should just send me the pistol and be done with it then, my friend
__________________
Don't dial 911, dial 1911
If you don't stand behind our troops, PLEASE feel free to stand in front of them!
Schiit audio, everything else ain't.
okie is offline   Reply With Quote
Old 10-01-2011, 14:29   #3
faawrenchbndr
CLM Number 281
The Dude Abides
 
faawrenchbndr's Avatar
 
Join Date: Nov 2005
Location: east of East St. Louis
Posts: 34,293
What "experts" have stated the Ruger was destined to be a POS?

Last edited by faawrenchbndr; 10-01-2011 at 14:33..
faawrenchbndr is offline   Reply With Quote
Old 10-01-2011, 14:29   #4
4TS&W
2A RKBA 4EVER
 
4TS&W's Avatar
 
Join Date: Jul 2002
Location: here and there...
Posts: 10,767
Get in line Okie... right behind me!
4TS&W is offline   Reply With Quote
Old 10-01-2011, 14:31   #5
1 old 0311
Senior Member
 
Join Date: Jan 2006
Location: Planet Earth
Posts: 4,254
Quote:
Originally Posted by ptmccain View Post
Well, I took the Ruger SR1911 out to the range today, and shot it for the first time, putting it through its paces. What a major disappointment.

I've been reading here from "experts" that this thing is bound to be a piece of junk, sure to fail, go bad, do something wrong, or be wildly inaccurate, in other words, surely, Ruger's first attempt at a 1911 will be a bad one, or one only half-way well done.

It performed flawlessly, through over 400 rounds, not a single misfeed, FTF, or FTE. Nothing, and I tried my best to get it to stutter and cough. It would not hear of it. Unlike my Springfield Loaded through its first few hundred rounds, the Ruger SR1911 had not a single issue.

I stripped one off the mag and had one in the chamber and shoved the magazine back in fully loaded...perfect performance. I used four different magazines with it, Ruger's own 8 and 7 rounder, that it came with, some relative inexpensive Kimbers, a bunch of Kimber Pro-Tac and one Wilson ten round magazine. Again, I was disappointed that it performed flawlessly with each magazine. I shot it as fast as I could through four magazines in a row, one right after the other...flawless.

Sure, however, I thought...using the least expensive crappy ammo I could find would be its undoing. I just knew the "experts" had to be right. But, again, disappointment. Shooting the cheapest FMJ brass ammo I could find, from some Hungary or Czechoslovakia company...400 rounds, no problems.

I was so disappointed, I have posted a series of range reports showing you how it failed to live up to the negative predictions of experts.

At 25 feet, from a bench rest, I shot a one inch group, at 25 yards, put them into about a two inch group and at 50 yards, I got most of the shots in the black on the bulls-eye target.

How can I trust the "experts" who predicted my Ruger SR1911 would be so bad?

You can see for yourself....

Ruger SR1911 Range Report Part 1
Ruger SR1911 Range Report Part 2
Ruger SR1911 Range Report Part 3
Ruger SR1911 Range Report Part 4


Signed,
Bill Ruger Jr.
1 old 0311 is offline   Reply With Quote
Old 10-01-2011, 14:31   #6
ptmccain
Silver Membership
Senior Member
 
ptmccain's Avatar
 
Join Date: Nov 2010
Location: Missouri
Posts: 605
I know...I feel like throwing it away. I was crushed that, as predicted by the joker ripping Ruger here, it would simply come to pieces after the first magazine or so.

Didn't happen.

__________________

Verbum Domini Manet in Aeternum


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

ptmccain is offline   Reply With Quote
Old 10-01-2011, 14:32   #7
4949shooter
Senior Member
 
4949shooter's Avatar
 
Join Date: Aug 2006
Location: New Jersey Republik
Posts: 13,095


That is some good one handed shooting.

Congrats on your new Ruger.
__________________
"...the men under your command deserve your leadership."-OXCOPS
4949shooter is offline   Reply With Quote
Old 10-01-2011, 14:32   #8
Quack
Rent this space
 
Quack's Avatar
 
Join Date: Jan 2002
Location: NE Ohio
Posts: 10,684
Quote:
Originally Posted by Amsdorf View Post
I've been reading around on the Internet from "experts" that this thing is bound to be a piece of junk, sure to fail, go bad, do something wrong, or be wildly inaccurate, in other words, surely, Ruger's first attempt at a 1911 will be a bad one, or one only half-way well done.

How can I trust the "experts" who predicted my Ruger SR1911 would be so bad?

:pop2:
You must be confused if you are referring to the thread, which was that a Springfield mil-spec was a preferred base gun for a custom build by top smiths.

I don't recall anyone saying that the Ruger was a POS.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
Quack is offline   Reply With Quote
Old 10-01-2011, 14:35   #9
ptmccain
Silver Membership
Senior Member
 
ptmccain's Avatar
 
Join Date: Nov 2010
Location: Missouri
Posts: 605
Quote:
Originally Posted by faawrenchbndr View Post
What "experts" have stated the Ruger was destined to be a POS?
This seems like a bit of a troll thread to me.

See the word expert in quotes, as in, "experts."

It was sarcasm, my friend.

I was poking Fenor in the ribs a bit and trying to offer a range report that was slightly less boring than most.

__________________

Verbum Domini Manet in Aeternum


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

ptmccain is offline   Reply With Quote
Old 10-01-2011, 14:36   #10
ptmccain
Silver Membership
Senior Member
 
ptmccain's Avatar
 
Join Date: Nov 2010
Location: Missouri
Posts: 605
It was sarcasm, see post above.

But so that there will be NO mistaking my message:

I am thrilled beyond words with the Ruger SR1911. I'm about ready to put my Springfield Loaded up for sale. It's been back to the factory once, and has had to get a part replaced, in less than a year. And it gave me grief for the first several hundred rounds.

The Ruger SR1911 was extremely accurate right out of the box.

I love it. I heart it. I've become a Ruger SR1911 Fanboy.


Need I say more?

!!!

Quote:
Originally Posted by Quack View Post
You must be confused if you are referring to the thread, which was that a Springfield mil-spec was a preferred base gun for a custom build by top smiths.

I don't recall anyone saying that the Ruger was a POS.
__________________

Verbum Domini Manet in Aeternum


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Last edited by ptmccain; 10-01-2011 at 14:47..
ptmccain is offline   Reply With Quote
Old 10-01-2011, 14:49   #11
faawrenchbndr
CLM Number 281
The Dude Abides
 
faawrenchbndr's Avatar
 
Join Date: Nov 2005
Location: east of East St. Louis
Posts: 34,293
Quote:
Originally Posted by ptmccain View Post
See the word expert in quotes, as in, "experts."

It was sarcasm, my friend.

I was poking Fenor in the ribs a bit and trying to offer a range report that was slightly less boring than most.


Was referring to the "Rugers are destined to be failures" thread as the
troll thread not this one.

Apologies,.......I edited that part out,but was a bit late.
I sure hope Ruger steps up production and offers an ALL stainless model
faawrenchbndr is offline   Reply With Quote
Old 10-01-2011, 15:03   #12
ptmccain
Silver Membership
Senior Member
 
ptmccain's Avatar
 
Join Date: Nov 2010
Location: Missouri
Posts: 605
oh< whoops
__________________

Verbum Domini Manet in Aeternum


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Last edited by ptmccain; 10-01-2011 at 15:07..
ptmccain is offline   Reply With Quote
Old 10-01-2011, 15:04   #13
ptmccain
Silver Membership
Senior Member
 
ptmccain's Avatar
 
Join Date: Nov 2010
Location: Missouri
Posts: 605
Oh, well don't I feel like the arse now.

: )

I'm sorry to be gushing on here, but I'm blown away by this thing. Elsewhere, Walt Kuleck told me: "When I first picked up the SR1911 I was in love. The feel, the feel...it's perfect.

I sold my SW1911s and bought another SR1911!"

Quote:
Originally Posted by faawrenchbndr View Post
Was referring to the "Rugers are destined to be failures" thread as the
troll thread not this one.

Apologies,.......I edited that part out,but was a bit late.
I sure hope Ruger steps up production and offers an ALL stainless model
__________________

Verbum Domini Manet in Aeternum


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Last edited by ptmccain; 10-01-2011 at 15:06..
ptmccain is offline   Reply With Quote
Old 10-01-2011, 15:17   #14
faawrenchbndr
CLM Number 281
The Dude Abides
 
faawrenchbndr's Avatar
 
Join Date: Nov 2005
Location: east of East St. Louis
Posts: 34,293
No harm , no foul! It's all good!



Darn it if you aren't one of the lucky ones,.....I've yet to ever see one first hand.
faawrenchbndr is offline   Reply With Quote
Old 10-01-2011, 15:18   #15
Wishoot
Senior Member
 
Wishoot's Avatar
 
Join Date: Aug 2010
Location: Milwaukee
Posts: 643
Sorry to hear about your disappointing experience.

I plan on picking one up as soon as I can find one just to see how disappointing they truly are.
Wishoot is offline   Reply With Quote
Old 10-01-2011, 16:48   #16
bac1023
Senior Member
 
bac1023's Avatar
 
Join Date: Sep 2004
Location: PA
Posts: 93,290
Cool

Glad you like your new SR1911. I love mine as well.
__________________
.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
bac1023 is offline   Reply With Quote
Old 10-01-2011, 16:58   #17
3rdgen40
.45 fanatic
 
3rdgen40's Avatar
 
Join Date: May 2008
Location: Arkansas
Posts: 8,209
Did you save the box, to send it back to Ruger when they issue the recall ?




















........Congrats my friend.Nice looking pistol.
__________________
BIG BORE FAN
3rdgen40 is offline   Reply With Quote
Old 10-01-2011, 17:01   #18
ptmccain
Silver Membership
Senior Member
 
ptmccain's Avatar
 
Join Date: Nov 2010
Location: Missouri
Posts: 605
Oh, definitely. I'm good to go. I know it will utterly fall apart at the 600th round I put down the pipe.

__________________

Verbum Domini Manet in Aeternum


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

ptmccain is offline   Reply With Quote
Old 10-01-2011, 17:02   #19
ptmccain
Silver Membership
Senior Member
 
ptmccain's Avatar
 
Join Date: Nov 2010
Location: Missouri
Posts: 605
Quote:
Originally Posted by Wishoot View Post
Sorry to hear about your disappointing experience.

I plan on picking one up as soon as I can find one just to see how disappointing they truly are.
I can only hope you are as disappointed as I was this morning.

__________________

Verbum Domini Manet in Aeternum


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

ptmccain is offline   Reply With Quote
Old 10-01-2011, 17:31   #20
ptmccain
Silver Membership
Senior Member
 
ptmccain's Avatar
 
Join Date: Nov 2010
Location: Missouri
Posts: 605
Quote:
Originally Posted by bac1023 View Post
Cool

Glad you like your new SR1911. I love mine as well.
Glad to hear it, thanks, bro.
__________________

Verbum Domini Manet in Aeternum


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

ptmccain is offline   Reply With Quote

 
  
Reply


Tags
ruger, ruger sr1911
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 23:36.




Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 896
181 Members
715 Guests

Most users ever online: 2,672
Aug 11, 2014 at 2:31