New Guy with new G19 Gen4
Hello guys from Venezuela (South America) I just got a brand new G19 Gen4, I also own a G23 Gen4, G17 Gen2, PX4 Storm Full size .40 cal, PX4 Full size 9mm, PX4 SubCompact 9mm (all PX are G converted) and last but not less a Walther P99 AS .40 cal. Used to have a G26 Gen4 but sold it cause I didn't liked the short grip.
The thing is I'm having a little issue with the G19 Gen4, when I put the mag in and rack the slide to chamber a round, about 60% of the times the cartigrade will not feed in to the chamber, just will get stuck at half way pointing up on the middle of the feeden ramp... and therefore the slide won't go fully forward...
I have tried to rack it slowly, middle speed and flash speed and the results are the same... another thing I tried was with the slide locked back, put the mag in and then release the slide and the results are even worst...
It is jus too damm hard to chamber the first round, good for me that I always carry with one in the pipe, cause it would be impossible to relay on a gun that in most cases wont allow me to chamber the first round properly, I'm also worry about malfunctions like FTFeed during firing...
I carried for a few days but I went back to my PX SC which is pretty smoth..
I have putted like 50 rounds thru the G19 no failures so far..
Well guys I really glad to be here sourrounded of so many knowleged people and I hope to be ussefull to the forum.
Gretting from Venezuela.