[cmwhitt]

*****SOLD SOLD SOLD SOLD*****
*****SOLD SOLD SOLD SOLD*****
*****SOLD SOLD SOLD SOLD*****
*****SOLD SOLD SOLD SOLD*****

I have a nice AR-15 for sale. Looking to sell this rifle face-to-face in South Florida (Broward, Palm Beach, or Miami-Dade County areas), or I'm willing to ship it to an FFL (buyer pays shipping).

I'm the original owner of this rifle. I put it together as a loaner for friends & family when they went shooting with me. It has approximately 400 rounds through it.

It is a DPMS Panther A3 style (flat-top) rifle, marked ".223 - 5.56mm". It is a 16" barrel with a mid-length gas system. It has a 1:7 twist chrome-lined barrel. It has M4 feedramps. The rifle functions perfectly. It was used 3 or 4 times total, and has sat in my gun safe besides that.

The rifle has some minor cosmetic scratches/blemishes that I've tried to show as clearly as possible in the photos. The first couple of scratches are on the ejection port side of the upper, just in front of the ejection port. I scratched this by accident when removing the delta ring to install the rail system. The scratches are not deep and are just cosmetic. The other blemish is on the barrel, directly in front of the gas block. This is just discoloration from where the original front sight/gas block assembly was before I removed it. I just never got around to painting/duracoating the discoloration. Once again, purely cosmetic.

The rifle currently has a like-new Aimpoint CompML3 (4 moa) holo sight on a Larue Tactical QD Cantilever mount.

I am asking $1100 O.B.O. for the entire package WITH the Aimpoint & Larue mount.
I am asking $700 O.B.O. for the entire package WITHOUT the Aimpoint or mount.

If you add everything up (see the list below), this rifle cost me over $2100 (not including shipping costs) to assemble as it currently is.

Please PM or e-mail me with any questions.

Here are the total specs...
For reference, I have included a link to a reputable online store (Bravo Company) for each item, and listed what the current price is:

• DPMS Panther A3 AR-15 (16" mid-length 1:7 twist chrome-lined barrel) >> $750
• Aimpoint CompML3 (4 moa dot) with black rubber cover >> $506 - http://www.bravocompanyusa.com/Aimpo...comp%20ml3.htm
• Larue Tactical Quick Disconnect Cantilever Aimpoint mount >> $140 - http://www.bravocompanyusa.com/LaRue...cantilever.htm
• Troy Industries free-float quad-rail 10" handguards >> $240 - http://www.bravocompanyusa.com/Troy-...20mrf%20mx.htm
• Magpul CTR buttstock (flat dark earth) >> $92 - http://www.bravocompanyusa.com/Magpu...g311%20fde.htm
• Magpul MIAD complete pistol grip set (3 backstraps, 4 frontstraps, 3-round grip insert) (flat dark earth) >> $38 - http://www.bravocompanyusa.com/Magpu...%20-%20fde.htm
• Midwest Industries Same-Plane Low-Profile flip-up rear sight >> $120 - http://www.bravocompanyusa.com/Midwe.../mi%20splp.htm
• Midwest Industries flip-up front sight >> $80 - http://www.bravocompanyusa.com/Midwe.../mctar-ffr.htm
• Yankee Hill Machine Phanton 5C2 flash suppressor/compensator >> $25 - http://www.bravocompanyusa.com/Yanke...yhm-28-5c2.htm
• VLTOR low-profile gas block >> $56 - http://www.bravocompanyusa.com/VLTOR...ck%20gb-2s.htm
• Magpul PMAG 30-round magazine (flat dark earth) >> $14 - http://www.bravocompanyusa.com/Magpu...g211%20fde.htm
• Magpul XTM rail guards (on side rails, alternated flat dark earth & black) >> $8 x 4 sets - http://www.bravocompanyusa.com/Magpu...arth%20xtm.htm
• Magpul low-profile rail covers (flat dark earth) (on top and bottom rails) >> $12 - http://www.bravocompanyusa.com/Low-P...0pro%20fde.htm
• Polymer vertical fore-grip >> $20 - http://www.bravocompanyusa.com/Compo...vpg%20comp.htm
• Two (2) steel 30-round magazines >> $9 x 2 - http://www.bravocompanyusa.com/AR-15...0dh%20gt30.htm

______________________________
TOTAL BEFORE SHIPPING: $2143

Extra pieces:

• Original CAR buttstock (black)
• Original pistol grip (black)
• Original mid-length CAR round handguards (black)
• Original A2 flash hider and washer
• Original front sight with bayonet lug and sling ring
• Extra mid-length gas tube
• Extra sets of Mapgul XTM rail guards
• Extra piece of Magpul low-profile rail cover

[cmwhitt]

[cmwhitt]

[cmwhitt]

bump.

[cmwhitt]

Open to all reasonable offers =)

[cmwhitt]

btt. =)

[cmwhitt]

to the top. All reasonable offers will be considered.

[celicacy]

If u ever come up near ne fl let me know. I would get this from u. Email me if u do celicacy@hotmail.com

[DylanPowell]

How far can i get with a like new G17 4th gen?

[cmwhitt]

Not looking for trades. Sorry.