View Single Post
Old 10-08-2012, 09:19   #24
molar
Senior Member
 
Join Date: Apr 2007
Location: TN
Posts: 384
Quote:
Originally Posted by dhgeyer View Post
As I have said before, based on my gun at least, too tight isn't the problem. There enough room in the EDP channel for the EDP to wiggle a little, so it's not binding. My guess is that the front end of the channel is very hard and very sharp.

You have said something very interesting that hasn't been mentioned before. That is that there is a different amount of space between the extractor claw and the breech face with different slides and the same extractor. Different models I realize, so not apples to apples. Still, I wonder if this doesn't lend some credibility to those who are saying that some of the slides are out of spec. It would be interesting to get a few owners of the same model and generation together and try this.
My slide is definately out of spec. See my post above

I took the non lci extractor and slb out of my gen 2 22 and tried it in the 19. It holds the 9mm case much more securely to the breechface than a 9mm extractor of an gen. I'm betting this solves my ejection problems. I'll know Friday for sure
molar is offline   Reply With Quote