View Single Post
Old 12-31-2011, 12:04   #1
rickjames513
Registered User
 
Join Date: Dec 2011
Posts: 9
Ak 47 Muzzle Pin Stuck

Ok, I was doing some general maintenance on my AK-47 and cleaning it when I removed the Muzzle Accessory. I pressed the pin down to hold it and noticed that the pin stayed down (5th picture, Green arrow) and didn't come back up. I was wandering if anyone had a reason why this is doing that and how to get the pin to come back up without messing up the finishing on the rifle or doing permanent damage. I was thinking that the forward pins (5th picture, Red arrow) on the side may be able to be punched out and release the pin, however I am unable to get that pin to budge either. I'm attaching a couple pictures. I hope you can see and/or understand what I'm talking about. Thank you all in advance!
Attached Thumbnails
Gunsmithing - Click for larger version   Gunsmithing - Click for larger version   Gunsmithing - Click for larger version   Gunsmithing - Click for larger version   Gunsmithing - Click for larger version  


Last edited by rickjames513; 12-31-2011 at 12:12.. Reason: Adding a Picture
rickjames513 is offline   Reply With Quote