Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   The Kalashnikov Klub (http://glocktalk.com/forums/forumdisplay.php?f=94)
-   -   Arsenal X2 today (http://glocktalk.com/forums/showthread.php?t=1507870)

micdude 10-29-2013 16:22

Arsenal X2 today
 
So I was in my LGS picking up some ammo for my new Kel-tec PMR-30 when I saw what I think is a Arsenal sgl-21. I looked it over and realized its used and an Arsenal not a Fime group with a sticker of $900. Then I noticed some rust on the brake and that's where the negotiations started
Because it looks like someone shot some corrosive ammo in it and didn't clean the brake. After some wheel and dealing I ended up picking it up for $750 due to the brake not coming off and a little surface rust in the brake NO where else. Everything else including the bore looks new and hardly used.

So what do you guys think what model is it sgl 21 something?

My plan is to soak brake and then dump a few mags then try to remove the brake. Anyone have any experience with this?

http://i360.photobucket.com/albums/o...psb340aa0c.jpg

http://i360.photobucket.com/albums/o...ps684ae32c.jpg

ArmoryDoc 10-29-2013 17:25

Use CLP or run the risk of ruining the finish. Soak overnight.

rytlewski 10-29-2013 17:37

I stopped reading at "my new Kel-Tec PMR_30"! Very hard to find and I want one.

micdude 10-29-2013 17:46

Quote:

Originally Posted by rytlewski (Post 20724529)
I stopped reading at "my new Kel-Tec PMR_30"! Very hard to find and I want one.

I know LOl! I traded for it and it cost me more than msrp.:upeyes:

It's been a good week!

http://i360.photobucket.com/albums/o...ps36b7c91f.jpg

6forsure 10-30-2013 10:16

Quote:

Originally Posted by ArmoryDoc (Post 20724503)
Use CLP or run the risk of ruining the finish. Soak overnight.

i actually had clp remove the finish from the dust cover of an arsenal

barth 10-30-2013 14:48

I use Ballistol on my Bulgarian Arsenal SLR-106U suchka.
It's very mild and works great.

ArmoryDoc 10-30-2013 17:25

Quote:

Originally Posted by 6forsure (Post 20726058)
i actually had clp remove the finish from the dust cover of an arsenal

Wow, not good. It works great on my Arsenal SGL.

micdude 10-30-2013 22:12

Quote:

Originally Posted by ArmoryDoc (Post 20726855)
Wow, not good. It works great on my Arsenal SGL.

I got it soaking in CLP and its not hurting it any here and if it does I will get a new Brake.

6forsure 10-31-2013 11:40

Quote:

Originally Posted by ArmoryDoc (Post 20726855)
Wow, not good. It works great on my Arsenal SGL.

only on the bolt carrier and dust cover. everything else was fine

dakrat 11-11-2013 08:53

Quote:

Originally Posted by 6forsure (Post 20726058)
i actually had clp remove the finish from the dust cover of an arsenal

interesting. the manual specifically mention to only use CLP.

{BMF}7.62x39 11-14-2013 20:00

Maybe heat it up with a hair dryer. Make sure the detent is pushed in. Stick one of the squeeze grip ends of a big pair of pliers through the hole in the brake and turn counter clockwise. (Not a left handed 14x1 thread). Also hot water desolves salts another possibility. Or take it to the range and heat it up then remove later. Just throwing some ideas out there. CLP should not hurt the finish. Hopes 9 will for sure though. Just my 2 cents. Except for the Hopes. That stuff will remove the finish in front of your eyes. I learned the hard way.

cciman 11-16-2013 23:50

Kroil, or WD40, neither will touch the finish. Its just cheap finish anyways-- just hit it with grill paint for touch up. No biggie.

why do you want to take off the brake, it is one of the best brakes for the AKM?


All times are GMT -6. The time now is 04:34.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.