Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   Gunsmithing (http://glocktalk.com/forums/forumdisplay.php?f=23)
-   -   Mechanical of the Colt pocket hammerless pistol (http://glocktalk.com/forums/showthread.php?t=1470930)

gerard 02-10-2013 13:43

Mechanical of the Colt pocket hammerless pistol
 
New ebook recently published at HLebooks.com

Title : Mechanical of the Colt pocket hammerless pistol
Author: Gerard Henrotin

Download page : http://www.hlebooks.com/ebook/co1908en.htm

Ebook content
Field stripping of the Colt pocket "Hammerless"
- Interlocking of the receiver's rails with the slide inner grooves
- Barrel's ribs interlocking with the receiver's locking grooves
- The correct position of the slide
- Counterclockwise rotation of the barrel
- Barrel dimensions
- Recoil spring guide dimensions
- The recoil spring guide with internal plunger
Advanced dismounting of the slide
- Dismounting of the firing pin
- Plug threaded in the breech face
- Firing pins dimensions
- Dismounting of the extractor
- Extractor dimensions
- Dismounting of the slide forward plug
- Slide forward plug dimensions
- Rear and front sights dimensions
Advanced dismounting of the receiver (I)
- Dismounting of the grip plates
- Grip cross screw dimensions
- Release of the grip safety
- Dismounting of the safety lever
- Safety lever dimensions
- Dismounting of the hammer
- Dimensions of the hammer without safety notch
Advanced dismounting of the receiver (II)
- Dismounting of the grip safety
- Grip safety dimensions
- Main spring dimensions
- Dismounting of the sear spring and magazine catch
- Sear spring dimensions
- Magazine catch dimensions
Advanced dismounting of the receiver (III)
- Dismounting of the sear and disconnector
- Sear dimensions
- Disconnector dimensions
- Dismounting of the trigger
- Trigger dimensions
- Dismounting of the ejector
- Ejector dimensions
- Dismounting of the magazine safety
- Magazine safety dimensions
- Index of the parts
Functioning of the Colt pocket "hammerless" (I)
- Stress on the barrel locking ribs
- Cartridge guide and ejector
- Early stage of the extraction
- Trigger's rear extension explained
Functioning of the Colt pocket "hammerless" (II)
- Functioning of the trigger mechanism
- Hammer cocked and caught by the sear
- Trigger pulled and hammer released
- Ejector's truncated hole
- Disconnector's oscillation
- Disconnection upon firing and recoil
- Hammer cocked and trigger in disconnected status
Functioning of the Colt pocket "hammerless" (III)
- Hammer and firing mechanism
- Early sear and hammer without safety notch
- Evolution of the sear's design
- Hammer lock at the safety notch in Colt .45 Model
- Purpose of the Colt pocket "hammerless" safety notch
- Grip safety functioning
Functioning of the Colt pocket "hammerless" (IV)
- The manual safety explained
- Active portion of the safety lever
- Early sear working with a hammer without safety notch
- Safety lever used as cocking indicator
- The magazine safety explained
- Tansley safety deactivated by the magazine
- Useful devices unavailable
Reassembly tips (I)
- Reinstalling the magazine safety
- Reinstalling the ejector
- Reinstalling the trigger
- Reinstalling the sear and disconnector
- Reinstalling the magazine catch
- Reinstalling the sear spring
- Reinstalling the grip safety and main spring
Reassembly tips (II)
- Locking of the sear in vertical position
- Reinstalling the hammer
- Reinstalling the grip safety pivot pin

Ebook screen prints
http://www.outdoorebooks.com/ebay/co1908en/im-01.jpg
http://www.outdoorebooks.com/ebay/co1908en/im-02.jpg
http://www.outdoorebooks.com/ebay/co1908en/im-03.jpg
http://www.outdoorebooks.com/ebay/co1908en/im-04.jpg
http://www.outdoorebooks.com/ebay/co1908en/im-05.jpg
http://www.outdoorebooks.com/ebay/co1908en/im-06.jpg


All times are GMT -6. The time now is 00:39.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.