Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   General Glocking (http://glocktalk.com/forums/forumdisplay.php?f=19)
-   -   Glock mag extensions?? (http://glocktalk.com/forums/showthread.php?t=1470186)

Trunkkmonkey 02-07-2013 02:12

Glock mag extensions??
 
I am looking for magazine extensions. I don't care about increasing the round count, I am looking for a good grip and weight extension. I do have several LIGHTNING STRIKE aluminum plates but trying to find some that are a little deeper. Any suggestions, or links would be greatly appreciated.

intenseneal 02-07-2013 06:50

Glock and Speer both make +0 and +2 mag extensions that are nice.

Jailer252 02-07-2013 08:08

Talk to dave at NDZ performance. I have posted on a mag extension he did for me and I am VERY pleased....


Here is my post...

http://www.glocktalk.com/forums/show....php?t=1468190

Honor Bound 02-07-2013 08:24

I use Pearce +0 magazine extensions on my G30 mags. Gives me a bit more control and makes the height of the frame just about equal to a G19.

They didn't seem to have a great impact when I first put them on, but years later, I can definitely tell if I use a mag without it.

I usually get this kind of stuff from glockmeister.com

http://www.glockmeister.com/Magazine...epartments/67/


HB

crutch_4glock 02-07-2013 08:44

Hello,new member and first post. I tried a magwell extension from The Glock Store on a G23 IMHO SAVE YOUR MONEY. It didn't extend the butt atal.

ScottieG59 02-07-2013 09:05

I used the Pearce +0 extensions on my Glock 27. They worked well but I feel it printed more under a T-shirt. It got me thinking I might as well have a Glock 19 or 23.

I bought a Glock 19 and, for now, I am back to the flat stock magazine setup.

If you get the Glock brand extension, also get the magazine insert. I don't know why they are sold separately.

silversport 02-08-2013 06:43

the Pearce +0 extensions I had on G27 mags made the pistol much more controllable for me but at a slight cost of conceal ability...it was worth it to me at the time...

Bill

SiGlockBoy 02-08-2013 11:09

I use the Glock factory + extensions only. Never had a problem personally or from a customer. IE never pop off. Pierce, Scherrer have all had pop offs when dropped and just loaded. They don't seem to stay on 100%. Some work and some don't.

The + for Glocks with insert work great. They are supposed to add rounds to mag but what I have found is you can barely get 1 more in on a 27 and 2 more in on a 26. Full size guns tend to let 2 more go in but not always.

I also don't care about getting more rounds as I find them more useful on the 26 and 27 size guns. Never get used to having my pinky dangle and the Glock one adds just enough room to allow a perfect grip. I also use 3m tape on the front of extension to add a littel pinky bite to it. works perfectly.

If you're into duracoat, it tends to stick to it better than the metal parts. Go figure.

Stang_Man 02-08-2013 11:38

I just got the Dawson Precision tool-less ones in the mail. Install is easy, and disassembly for cleaning is a BREEZE!

These things are stout, I'll be shooting them this weekend. Here's a picture of stock, compared to the DP. My G22 is also sporting the Dawson Precision ICE Magwell.

http://sphotos-b.xx.fbcdn.net/hphoto...11491600_n.jpg

Stang_Man 02-08-2013 11:40

Picture of it in the gun. The mags also stand upright on the table now....hey, thats important to some people!

http://sphotos-a.xx.fbcdn.net/hphoto...00788985_n.jpg

mnmiv 02-08-2013 15:50

I have used both Scherer and Pearce. Currently, I'm running Pearce PG39's on both my G26 and G27. I experimented and bought one of each of the +0, +1, etc. and ran the mag with it a few times at the range to see what I liked. The +0 didn't do it for me, but to each his own.


All times are GMT -6. The time now is 07:59.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.