Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   General Glocking (http://glocktalk.com/forums/forumdisplay.php?f=19)
-   -   Glock 20sf defects? and cleaning? (http://glocktalk.com/forums/showthread.php?t=1451212)

Marshall_tx 11-04-2012 15:24

Glock 20sf defects? and cleaning?
 
2 Attachment(s)
I just got back from the range and cleaning my Glock, I noticed there were marks on the inside of the barrel that would not get cleaned off. I know Glocks can go to hell and back without needing any cleaning but is this corosion happening inside the barrel? Also, on the slide where the barrel protrudes from the front of the slide there are ridges in the slide :dunno:. Is this normal to happen? It's only on the top contact where the barrel sticks out from.

Thanks for any advice :supergrin:

rustypigeon 11-04-2012 15:32

That looks like gilding metal in the barrel. Mine look like that when i don't scrub them enough with the brush. I would get a new brush with stiff bristles and see if it comes out. Don't use an old worn out brush.

Marshall_tx 11-04-2012 15:51

Quote:

Originally Posted by rustypigeon (Post 19590829)
That looks like gilding metal in the barrel. Mine look like that when i don't scrub them enough with the brush. I would get a new brush with stiff bristles and see if it comes out. Don't use an old worn out brush.

Thanks, what do you suggest brass or plastic?

rustypigeon 11-04-2012 15:53

Quote:

Originally Posted by Marshall_tx (Post 19590884)
Thanks, what do you suggest brass or plastic?


Always use a bronze bore brush. The plastic brushes dont really do much.

seaswol 11-04-2012 15:57

Oh No!!!
 
Quote:

Originally Posted by rustypigeon (Post 19590829)
That looks like gilding metal in the barrel. Mine look like that when i don't scrub them enough with the brush. I would get a new brush with stiff bristles and see if it comes out. Don't use an old worn out brush.

Maybe the FTF and BTF are with New Gen 3, New Gen 4s have finally come to haunt the 10mm frames :rofl::rofl:
Shoot the MTFK with decent ammo and be done with it. Tired of all the sissy whinings, Yes I own a G19 and G26 Both in Gen 4, with no problems. Along with a LWD 10mm LS, G17, G34, G32 ...etc. No I do not have these problems with my Taurus 1911:rofl::rofl: and it is my most accurate semi auto.
Chris

seaswol 11-04-2012 16:11

Ooops, my mistake!!
 
[QUOTE=seaswol;19590901]Maybe the FTF and BTF are with New Gen 3, New Gen 4s have finally come to haunt the 10mm frames :rofl::rofl:
Shoot the MTFK with decent ammo and be done with it. Tired of all the sissy whinings, Yes I own a G19 and G26 Both in Gen 4, with no problems. Along with a LWD 10mm LS, G17, G34, G32 ...etc. No I do not have these problems with my Taurus 1911:rofl::rofl: and it is my most accurate semi auto.
Sorry,I tought this forum was open and ojectivity, my respnes has been blocked three times.
CX

seaswol 11-04-2012 16:12

Goodbye
 
CS from pns

Arc Angel 11-04-2012 16:15

Quote:

Originally Posted by seaswol (Post 19590901)
Maybe the FTF and BTF are with New Gen 3, New Gen 4s have finally come to haunt the 10mm frames :rofl::rofl:
Shoot the MTFK with decent ammo and be done with it. Tired of all the sissy whinings, Yes I own a G19 and G26 Both in Gen 4, with no problems. Along with a LWD 10mm LS, G17, G34, G32 ...etc. No I do not have these problems with my Taurus 1911:rofl::rofl: and it is my most accurate semi auto.

Sorry,I tought this forum was open and ojectivity, my respnes has been blocked three times.
CX

:upeyes: Gee, Why am I NOT surprised! (Sober up, man.) ;)

Arc Angel 11-04-2012 16:22

Quote:

Originally Posted by Marshall_tx (Post 19590810)
I just got back from the range and cleaning my Glock, I noticed there were marks on the inside of the barrel that would not get cleaned off. I know Glocks can go to hell and back without needing any cleaning but is this corosion happening inside the barrel? Also, on the slide where the barrel protrudes from the front of the slide there are ridges in the slide :dunno:. Is this normal to happen? It's only on the top contact where the barrel sticks out from.

Thanks for any advice :supergrin:

Wow. You take fabulous pictures! Those are tough photos to produce; and you've got them clear as glass.

Rustypigeon has given you good advice. In addition to the phosphor-bronze brush, I'd suggest you use a cleaner like Break-Free CLP; and let it sit in the barrel overnight before you start brushing. (You can, also, use Flitz Metal Polish and start brushing immediately without waiting.)

I think your bore will clean up fine; as for the barrel bushing in the slide? I don't know; but you have mentioned that it's got, 'depth' to it. That groove shouldn't be there; but, if this is the case, it's really not going to adversely affect the pistol's performance.

Marshall_tx 11-04-2012 18:58

Quote:

Originally Posted by Arc Angel (Post 19590976)
Wow. You take fabulous pictures! Those are tough photos to produce; and you've got them clear as glass.

Rustypigeon has given you good advice. In addition to the phosphor-bronze brush, I'd suggest you use a cleaner like Break-Free CLP; and let it sit in the barrel overnight before you start brushing. (You can, also, use Flitz Metal Polish and start brushing immediately without waiting.)

I think your bore will clean up fine; as for the barrel bushing in the slide? I don't know; but you have mentioned that it's got, 'depth' to it. That groove shouldn't be there; but, if this is the case, it's really not going to adversely affect the pistol's performance.

Thank you, I'll do that tonight with some CLP and let it sit overnight.


All times are GMT -6. The time now is 16:29.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.