Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   General Glocking (http://glocktalk.com/forums/forumdisplay.php?f=19)
-   -   Issues with a 3.5 Ghost (http://glocktalk.com/forums/showthread.php?t=1447112)

Roering 10-10-2012 11:24

Issues with a 3.5 Ghost
 
So I installed a Ghost 3.5 trigger connector (the drop in model) and found that after I reassembled the gun that the slide had considerably more resistance when I pulled it back the first 1/2 inch or so. Now being the drop in model I assumed that there was nothing more to do but the bar did stick out a bit more than the stock part.

My guess is that this is what is causing the resistance when I pull the slide back as it is resetting the trigger but I thought I would put it to the Glock masters here.

Could this be the cause?

Thanks.


All times are GMT -6. The time now is 04:01.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.