Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   General Firearms Forum (http://glocktalk.com/forums/forumdisplay.php?f=82)
-   -   Goofy question, but does anybody know when S&W... (http://glocktalk.com/forums/showthread.php?t=1446480)

bac1023 10-06-2012 12:36

Goofy question, but does anybody know when S&W...
 
...changed the style of the ampersand (&) between "Smith" and "Wesson"?

I'm trying to figure out when my new-to-me 39 was built. It has the ampersand with the larger curve. I have many Smiths and just went through my whole collection. The only other model I have using that ampersand is my 1955 K-frame revolver, so I'm thinking the 39 is pretty old.

You can see the difference in the ampersand between my 39 and 539.

I notice quite a few small details and I know its a goofy question, but does anyone have an answer? If you have an old Smith with the early ampersand, what year is it?

I'm hoping somebody knows. After all, I just went through every Smith I own looking at ampersands. :embarassed:

Thanks, in advance, for any help. :wavey:


http://i636.photobucket.com/albums/u...ituc/014-7.jpg

http://i636.photobucket.com/albums/u...tuc/009-14.jpg

Rick C 10-06-2012 15:06

Goofy answer. I would suggest, if you don't already know about it:
http://smith-wessonforum.com/

bac1023 10-06-2012 17:02

Thanks Rick

Yeah, I'm a member, so I guess I'll post.

There are some knowledgable people over there when it comes to S&W. :)

janice6 10-06-2012 17:22

Seems there was some intermingling of fonts for "&" on S & W handcuffs in the 60's.

Trapped_in_Kali 10-06-2012 22:31

I have a 39-2 from about 1980 and it has the same as your 539.

bac1023 10-07-2012 01:04

Quote:

Originally Posted by Trapped_in_Kali (Post 19492781)
I have a 39-2 from about 1980 and it has the same as your 539.

Yeah, the change happened way before then. I have early 70's models with the new style.

kooman 10-07-2012 07:56

aren't you about done rubbing that "steal" of a gun in our faces?:supergrin:

bac1023 10-07-2012 08:07

Quote:

Originally Posted by kooman (Post 19493345)
aren't you about done rubbing that "steal" of a gun in our faces?:supergrin:

:animlol:


Hey, after what I paid for some guns this past summer, I deserve a good deal or two. ;)

pennlineman 10-07-2012 08:12

The serial number range for modern autoloaders began with 1001 in 1954 and ran up to 115000 in 1970. After this the had an A prefix for some time. I'm just guessing yours was made between 1969-70.

Bruce M 10-07-2012 08:13

I paged through the Standard Catalog of Smith and Wesson last night and did not see anything regarding the ampersand change. My guess is that it might be different for the pistol slide than for revolver barrels and my other guess is that whenever the change was made might not be the most accurate dating method. Especially in that time it seems as if Smith and Wesson may have had substantial stocks of some parts that got stacked up somewhere and not used right away. My guess is that we still see the results of that over the last decade or so when they suddenly reintroduce some discontinued version for a small run.

pennlineman 10-07-2012 08:29

Bruce makes a very good point. There is no real way of knowing a S&W's birth date without getting a factory letter. They often stock piled parts to be used up at a much latter date. While the serial numbers are good clues it is not uncommon to see a gun born on a date long after that serial number block was used up.

For as many of these guns you buy the book would be a good investment for you. Really not all that expensive.

http://www.ebay.com/itm/NEW-Standard...item231d13fec1

bac1023 10-07-2012 08:30

Quote:

Originally Posted by Bruce M (Post 19493393)
I paged through the Standard Catalog of Smith and Wesson last night and did not see anything regarding the ampersand change. My guess is that it might be different for the pistol slide than for revolver barrels and my other guess is that whenever the change was made might not be the most accurate dating method. Especially in that time it seems as if Smith and Wesson may have had substantial stocks of some parts that got stacked up somewhere and not used right away. My guess is that we still see the results of that over the last decade or so when they suddenly reintroduce some discontinued version for a small run.

Very true

They probably changed it, but still had many parts in stock of the old style. Like I said, the only other Smith I own with it is my 1955 Target Masterpiece.

You can see it clearly here. Its the only Smith revolver I own with it.


http://i1209.photobucket.com/albums/...2011/044-1.jpg

bac1023 10-07-2012 08:31

Quote:

Originally Posted by pennlineman (Post 19493434)
Bruce makes a very good point. There is no real way of knowing a S&W's birth date without getting a factory letter. They often stock piled parts to be used up at a much latter date. While the serial numbers are good clues it is not uncommon to see a gun born on a date long after that serial number block was used up.

For as many of these guns you buy the book would be a good investment for you. Really not all that expensive.

http://www.ebay.com/itm/NEW-Standard...item231d13fec1

Thanks

Yeah, I probably should break down and get one of those. :embarassed:

gruntmedik 10-07-2012 12:05

Brian, this was made in 1957, and has the large ampersand.

http://i19.photobucket.com/albums/b1...rn/32HE004.jpg

bac1023 10-07-2012 12:59

Quote:

Originally Posted by gruntmedik (Post 19494031)
Brian, this was made in 1957, and has the large ampersand.

http://i19.photobucket.com/albums/b1...rn/32HE004.jpg


Thanks and very nice, by the way.

The no dash 39 was made from 1954 to 1966. I'm thinking mine may be closer to the early part of the run.


All times are GMT -6. The time now is 15:16.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.