Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   General Glocking (http://glocktalk.com/forums/forumdisplay.php?f=19)
-   -   Any PICS of Custom GRIP Work or Reductions?? (http://glocktalk.com/forums/showthread.php?t=1446440)

Nalapombu 10-06-2012 08:33

Any PICS of Custom GRIP Work or Reductions??
 
Hey all,

Does anyone have a M20 or 21 that they have had work done on the grip to make it fit smaller hands? I know there are shops out there that do work like this, but have never seen or handled one. I happen to find these 2 models uncomfortable and and can see how these mods might be a benefit.

I have also seen pics of these models that are modded where they take the mags of their little brothers like the 29 and 30.

Has anyone owned or shot one of these modded full sized Glocks? How did they feel and how did you like it? What's your thoughts on such modifications?

Lets see some pics please....if you have them.

Thanks for your time.

Nalajr

SCSU74 10-06-2012 09:52

i know cold bore customs is near you and they do great work. Another option is lone star armory up here in DFW. LSA has worked one 4 of my glocks and done a great time every time. Sounds like you are looking for a grip reduction and a frame chop. I would look at both websites and see which products look better to you.

www.lonestararmory.net
www.coldborecustom.com

Meathead9 10-06-2012 13:15

Glockworx
G20SF
Finger Groove Removal
Double Undercut Trigger Guard
Thumbrest/Swell Removal
Standard Stippling

http://i29.photobucket.com/albums/c2...9/9286e630.jpg

http://i29.photobucket.com/albums/c2...9/9860c82f.jpg

.

TxGlock9 10-06-2012 13:23

Quote:

Originally Posted by Nalapombu (Post 19490494)
Hey all,

Does anyone have a M20 or 21 that they have had work done on the grip to make it fit smaller hands? I know there are shops out there that do work like this, but have never seen or handled one. I happen to find these 2 models uncomfortable and and can see how these mods might be a benefit.

I have also seen pics of these models that are modded where they take the mags of their little brothers like the 29 and 30.

Has anyone owned or shot one of these modded full sized Glocks? How did they feel and how did you like it? What's your thoughts on such modifications?

Lets see some pics please....if you have them.

Thanks for your time.

Nalajr

You live in Spring.. Drive down to Cold bore customs in Katy, Texas and them do the work for your gun...

Nalapombu 10-06-2012 13:33

Meathead, that's a cool lookin' Glock for sure. Nice work.

Thank you all for the recommendations.

the drive down to Katy to check out Cold Bore Customs sounds interesting. I like to check out parts of the state I haven't seen yet. Only been here 8 months.
I looked at their website and they do have some great looking custom work to choose from. The only Glock I have right now is a G19 in OD Green. I like the way it is now and don't know if I would want to do any changes to it. I am looking into the work for a 20 or 21. I am thinking about one of those to use for backup when I go pig hunting. Not a hunting handgun, just a backup. The 20 and 21 are BIG frames, as you all well know, and they aren't very comfortable in my hands. I haven't handled the sf framed models so I don't know how well they would fit my hand.

I'm guessing the work they would do to make the 21 more comfortable to those that have smaller hands would be to get rid of the finger grooves and just reduce the diameter of the grip and stipple what's left. Is that about right? I'd like to check out one of those to see what it did feel like. Who know's, I might like it enough to have it done on my G19.

Do you all think that Cold Bore would have some work samples there for people to handle and look at if they stopped by?

Thanks again,

Nalajr

TxGlock9 10-06-2012 14:10

Quote:

Originally Posted by Nalapombu (Post 19491238)
Meathead, that's a cool lookin' Glock for sure. Nice work.

Thank you all for the recommendations.

the drive down to Katy to check out Cold Bore Customs sounds interesting. I like to check out parts of the state I haven't seen yet. Only been here 8 months.
I looked at their website and they do have some great looking custom work to choose from. The only Glock I have right now is a G19 in OD Green. I like the way it is now and don't know if I would want to do any changes to it. I am looking into the work for a 20 or 21. I am thinking about one of those to use for backup when I go pig hunting. Not a hunting handgun, just a backup. The 20 and 21 are BIG frames, as you all well know, and they aren't very comfortable in my hands. I haven't handled the sf framed models so I don't know how well they would fit my hand.

I'm guessing the work they would do to make the 21 more comfortable to those that have smaller hands would be to get rid of the finger grooves and just reduce the diameter of the grip and stipple what's left. Is that about right? I'd like to check out one of those to see what it did feel like. Who know's, I might like it enough to have it done on my G19.

Do you all think that Cold Bore would have some work samples there for people to handle and look at if they stopped by?

Thanks again,

Nalajr

Not sure but I wouldn't be surprised to see if they had customer worked or demo pistols available for you to see and handle.

faawrenchbndr 10-06-2012 16:36

Cold Bore Customs,....

-Grip Reduction package
-360 Texturing - "Tree Bark" on grip, Tactical Texture on all other areas
-Finger Hump removal
-Undercut trigger guard
-Texturing forward frame flats
-Recess cut mag release
-Speedwell Option

http://i30.photobucket.com/albums/c3...922604d243.jpg

Angry Fist 10-06-2012 16:44

My Robar'd Gen 3 G20.

http://i809.photobucket.com/albums/z...Z/100_3841.jpg


They did my Arredondo +5 also.

http://i809.photobucket.com/albums/z...AZ/Shelly1.jpg

Slotback 10-09-2012 20:08

Include me as another who highly recommends you send your Glock to Cold Bore Customs.

GlocksterPaulie 10-12-2012 22:35

Lane at CBC does outstanding work on polymer pistols. He has done a few for me and everyone of them has been flawless. He has a great eye for detail and it shows in his work.

Paulie

Opie 1 Kenopie 10-12-2012 23:44

Lane at Cold Bore Customs is a one man shop, and he's a full-time active duty cop. For that reason you're not likely to get to tour his shop and good luck catching him off duty. As cops we tend to be pretty protective about our home turf. That's my experience at least.

Nala, just look at his website. There's tons of great pics there. You can't go wrong getting a 21 or 20 and having the grip reduced. It's not slim like a G17, but it's way better than a stock G21/20. I did my own 21 and it feels great now. Never had a problem with the original wide grip, just a little too slippery.

Pierre! 10-13-2012 12:11

My G19/26
 
Here is my Chopped G19 - Grip length is the same as the G26:

http://i1110.photobucket.com/albums/...s/DSC00612.jpg

It's the one in the center - G26 on the right, G19 on the left...

Great Carry Pistol!

Happy Customizing!

Patrick

Bowtie 10-14-2012 19:50

Another thumbs up for Lane..

Bowtie 10-14-2012 19:57

http://i448.photobucket.com/albums/q...psa56ce44b.jpg

Bowtie 10-14-2012 20:08

http://i448.photobucket.com/albums/q...65/glock17.jpg

Angry Fist 10-14-2012 20:10

Glad to see ya back, Bowtie. You too, Paulie. :50cal:

Bowtie 10-14-2012 20:12

Quote:

Originally Posted by Angry Fist (Post 19519058)
Glad to see ya back, Bowtie. You too, Paulie. :50cal:

Thank you Sir!

GlocksterPaulie 10-14-2012 20:25

Thanks angry. Been slammed with travel for a while. Bowtie, your stuff looks as great as ever. I may be working on a new logo and may see if you can do it on a Glock grip.

I will contact you down the road when I slow down a little. I don't want to hijack the thread.

Paulie

Bowtie 10-14-2012 20:27

Just let me know Brother..

Dogman 10x 10-18-2012 21:46

Very nice


All times are GMT -6. The time now is 01:25.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.