Glock Talk - Custom work done...

Glock Talk (http://glocktalk.com/forums/index.php)

- General Firearms Forum (http://glocktalk.com/forums/forumdisplay.php?f=82)

- - Custom work done... (http://glocktalk.com/forums/showthread.php?t=1443704)

Custom work done...

So last time I showed pictures of my stuff, it was work done on some G30's. This time, it's my Hk USP. I'm just going to have fun with this gun. I'm going to end up doing absolutely everything I can to this gun, slide lightening (maybe more), matching the spring rate to the slide weight, I fit an aluminum weight to it that a friend made me, I'm putting a Delta Point on it recessed into the slide with the sights moved forward in front of it, Cerakoting the slide and weight Burnt Bronze, coating the Jarvis barrel with TiN along with a couple mags.... I might, might even flute the barrel. This is just an "all or nothing" gun for me. Anyway, here is what it looks like right now. I know you can't see it in the pictures, but the serrations in the slide match the angles of the serrations in the weight. The size of the serrations are different and so is the spacing, but I wanted it to also look good if I didn't have the weight on. For those of you that like the Match, but also hate the extra weight, that the weight has... the aluminum is awesome!

This is what it looked like with the weight's final fit...
http://i1108.photobucket.com/albums/...ps07cb7631.jpg
I had to make an insert that fit like a glove inside the slide so I didn't crush anything in the vise.
http://i1108.photobucket.com/albums/...ps7717c71f.jpg
Machining the serrations in the slide.
http://i1108.photobucket.com/albums/...ps0523ec18.jpg
What it looks like without the weight.
http://i1108.photobucket.com/albums/...ps9d24704b.jpg
With the weight, but no barrel (still have to get it).
http://i1108.photobucket.com/albums/...pse6d8e9e8.jpg

So, that's it so far. Still a long way to go. http://www.ar-15.co/forums/images/sm...anim_beer1.gif

I think it looks pretty cool!

That looks awesome.

Outdoor Hub mobile, the outdoor information engine

looks awesome so far. It'll look amazing after you do the rest of those upgrades you were talking about.

Very nice

Congrats! :cool:

I'd be concerned about proper functioning after removing mass form the slide.

Not my cup of tea, but if you like, that's all that matters.

Quote:

Originally Posted by M&P15T (Post 19435253)

I'd be concerned about proper functioning after removing mass form the slide.

Not my cup of tea, but if you like, that's all that matters.

That's why you have to tune the spring weight to the new slide mass and whatever loads he's going to using.

Quote:

Originally Posted by NeverMore1701 (Post 19435936)

That's why you have to tune the spring weight to the new slide mass and whatever loads he's going to using.

This is correct, there is a ton of metal on Hk's though and that little metal taken, isn't much. This is not my first modification like this. I also have a couple of my modified guns being used in competition that have several thousand rounds through them and still ticking.

Just curious, whats the point of lightening the slide but then adding weight back to the front?

Quote:

Originally Posted by xkon (Post 19444058)

Just curious, whats the point of lightening the slide but then adding weight back to the front?

I'd guess that less moving mass and more stationary mass work to reduce recoil?

Quote:

Originally Posted by xkon (Post 19444058)

Just curious, whats the point of lightening the slide but then adding weight back to the front?

Heavier muzzle flips less during recoil.
Lighter slide weight transfers less energy & weight to the rear
during recoil. So the mods create a pistol that stays on target longer
& come back to target quicker.........& they will catch a crap-load of lint.

Gonna install a jet funnel kit?

Quote:

Originally Posted by xkon (Post 19444058)

Just curious, whats the point of lightening the slide but then adding weight back to the front?

Heavier front end less muzzle flip. Lighter slide faster cycle time.

Back in the day of Bill Wilson and his comped 1911 .45s the comp actually reduced muzzle flip by directing high pressure gas upward which helped.

Nowadays the IPSC style comp'ed guns use the comp more for a weight than a true compensator. This is due to the current style guns using .380auto spec ammo, lightweight slides, etc and their ammo is custom tuned to that particular pistol.

Gamers.

asrspyder,

Nice work! I'm a shadetree machinist and I do appreciate fine workmanship.

Spyder

Very nice work!

Todd

even though I suck and HK hates me...that is pretty sweet.

So I decided to move forward on my stainless first before the black one. The stainless is staying silver of course, and I don't know if I'm gona put a compensator on it like the black one. I did for the pictures, just for picture's sake. The black one is going to get stripped of its bluing and get Cerakoted as soon as I cut into it for its sight. Then I have to decide if I'm dipping it in hydrographics... There is still black marker on the top of the slide where I marked my stopping point, and I still have to put the rear sight back on.
http://i1108.photobucket.com/albums/...r/DSCN3429.jpg
http://i1108.photobucket.com/albums/...r/DSCN3424.jpg
http://i1108.photobucket.com/albums/...r/DSCN3431.jpg
http://i1108.photobucket.com/albums/...r/DSCN3432.jpg

I saw that same gun in Blade Runner, :tongueout:just kidding!
But wow, looks cool with all the work you done! :thumbsup:

You should see if you can sell that kind of work to the people that provide guns for Hollywood movies. Might as well cash it in every which way you can.

Excellent work! Thanks for sharing.:cool: