Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   GATE Glock Pistol Forum (http://glocktalk.com/forums/forumdisplay.php?f=247)
-   -   19L recoil spring question (http://glocktalk.com/forums/showthread.php?t=1377418)

fredglock 10-24-2011 06:30

19L recoil spring question
 
I have already installed a LWD 19L barrel and dustcover on a G17 slide, but am uncertain what recoil spring assembly to use. The dustcover seems set up to take a standard G19 spring assembly, but will not cycle properly. I tried a G17 spring assembly and it seems to work. My concern is that the G17 recoil spring assembly requires a lot of compression to fit into place.

Which of those two should I be using, or should I go to an aftermarket replacement rod and uncaptured spring?

fred

JR 10-24-2011 07:21

You need to use the G19 recoil spring. If you are experiencing FTE issues drop the recoil spring weight down to 13lbs

fredglock 10-24-2011 08:43

Thanks, JR. I will do that.

fred


All times are GMT -6. The time now is 15:40.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.