Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   Lone Wolf Distributors Forum (http://glocktalk.com/forums/forumdisplay.php?f=269)
-   -   ftf problem on new barrel (http://glocktalk.com/forums/showthread.php?t=1375006)

scubanoah 10-11-2011 19:43

ftf problem on new barrel
 
Hello, I just purchased a 6 port extended barrel for my glock 34. First trip to the range I had 20 or so ftf out of 200 rounds. They were getting stuck in the same spot everytime, looking in the chamber it was at about the 7 o'clock position. Is there something I can try without sending it back in? I have already emailed about it and was told to send it in but said it could take 4 weeks or so. I tried 5 or 6 different ammo of various grain and +p stuff with all same result. Thanks for your time

LoneWolfMarketing 10-13-2011 09:26

When you say they are getting stuck do you mean that they are not being pulled out of the chamber or are they clearing the chamber but not being ejected from the action all the way?

The best bet is to just send it in for the Armorer to look at, he usually takes 2-4 weeks.

scubanoah 10-17-2011 21:27

Sorry should have been more clear. I was having feeding issues, they were nose diving at the 7 o'clock position between the feedramp and chamber. I could kind of manipulate the slide a little and force the round into the chamber. I polished the feedramp up real well and throated it just a bit and it runs awesome now. Thanks for the response

LoneWolfMarketing 10-18-2011 14:22

Ok sounds good.


All times are GMT -6. The time now is 02:12.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.