ganda ng picture, baket me damuhan?

Naku. Did I just inherit some of Eyecutter's BI juju? :shocked:

Hindi yan damuhan, Mark. That's a umm Filipino gun mat.

Actually, it's just a wall ornament I pulled off to serve as a background. I didn't want people to find out I use Hello Kitty bedsheets....

kaya pala ang linis, i think you'd make a good visual director.

How much did you get your norinco Taurus?

Mark, the pre-loved parts are Ed Brown. Pag kinapos ng budget baka yung ibang parts Armscor na lang, aka Lokal Brown.

Pot, I bought it from the Federal Gun Exchange for Php14,600 excluding license. The gun was released in 11 working days.

if you plan it well, you can change parts as you go along no need to pour it all in one go. pwedeng as they break(though it ma take a long time) or as you want, or as budget permits.

This is very bad na i think before the year ends mabibili ko na din yung akin.

Pwede ba paputok yan 9mm mo atty.?

Doc na Doc ang dating noh? Taurus, si Doc and si mtho parang si Obiwan and si Luke pag dating sa BI :rofl:

Mtho kung gagawa ako ng SS, dapat in 40 para iisa lang sku ng bala ko :supergrin:

If you enjoy changing the parts, I think you can go ahead and keep the original as spare. Kasi kung hihintayin mong masira, ang tagal! Norinco yan, matigas yung bakal :supergrin:

Sure, Pot.

14k for a norc! ang mura a

Taurus,
try mo 10 or 12lbs recoil spring on 9mm

Parang mas okay yata kung 9mm na lang din para yung bala pwede sa glock 19 vice versa.

Ganda nito pwede gayahin
http://www.para-usa.com/new/images/p...Sphoto_big.jpg

bro, the unit's not bad at all! if that's my 1911, i'd have gretchen engrave the norinco logo deeper and add a chinese flag!

you can have churchil redo the tire-tread stippling into regular serrations. the front cocking serration needs another groove for visual balance. replace the sights with bomar rear and matching front sight.

i'd replace the safeties with an ed brown wide ambi. you really don't need te extended mag release.

finish off with a nice pair of operator 2s from vz grips and ganda!

si atty GMV and 9MX mukhang mag start na rin ng SS project! hehehe!

Hindi ako kasama dyan :tongueout:

pot meron pa akong ganyan trigger pang single stack, sti brand

Last minute proje t for 2011

9mm std gun minor

Ill put a kart barrel on armscors gi
Slide to frame fit
Triger upgrade etc
Bomar rear

Color ? Black and yellow ? Haha

yellow? ano yan gold? parang sa faceoff? dapat 2 yan tapos me kasamang chicklett

choi, schuemann bull barrel gusto mo?

choi, pang ppc yan ano? hahaha! may kalaban ka na si atty taurus!

I went to the range to test the Norinco. Fired 75 rounds of reloaded FMJ from Armscor MCS. Had one stovepipe and five or six instances of the slide not locking back after the last round. All 75 rounds did fire, however, and there were no feeding problems. The very heavy trigger prevented me from properly gauging the accuracy, although all rounds did make a ragged two-inch diameter hole at 7 yards, and most probably even better accuracy with a better trigger.

Phase 2 is done. Now on to Phase 3: Going to the gunsmith for the Schuemann barrel replacement, trigger work and internals replacement. If the gun shoots well, Phase 4 is next. Coating, stippling, and aesthetics.

extended slide stop yan di ba? you can have it ground down to normal length. you were probably hitting the slide stop with your support hand and or riding the slide hence the slide not locking back and the stove pipe.

kelan natin dadalhin kay churchil?

For ipsc usually ayaw ng shooter mag lock back yung slide.

Mtho bro yellow talga parang bumble bee hehe sayang i had 2 kart barrels na

Doc tama hehe pero plan ko rin gaitin sa classic 1911 and sana tapos na sa team bogs bakal

also building a classic division shooter

torn between getting a schuemann 45 AET bull barrel or just a conventional bull barrel which is better? pro? cons?

An AET bull barrel is probably more accurate than necessary for IPSC. I understand AET barrels are much more expensive and designed to give 2-inch groups at 50 yards. Regular Shuemann bull barrels are almost a accurate and will be more than adequate for IPSC-sized alpha zones at 25 yards.

bro, aet ba yung barrel mo?

tnx for the info

the 45 aet is tempting because its here already, but its a 2-3 month wait for a barsto or regular shuemann bullbarrel

magkano .45 aet and non aet?

I'm having a regular Ultimatch barrel fitted, bro. I'm not totally sure about the prices I think MTHO knows.

Nice one ask ko lang pede naba bull sa classic 1911?

yup, pwede bull barrel.

ang hindi pwede yung mga lightening cuts which really does not make sense. wala naman advantage yun mga butas sa slide

hmm ngulo plano ko kaya ako nag 9mm ksi kla ko di pwde yung bull nung una so i dummped the 40 cal ss project now me 9 mm nko grhhhhhh

well ok narin blha n si bat man hehe

40 is for major and 8 round maximum lang whille 9mm pang minor pwede ka 10 rounds. if you load more than 8 sa 40 its considered minor din ata

mtho nice thing to consider ha . if you load more than 8 sa 40 youll be considered minor and not open?

guys guys help a 9 mm classic 1911 or 40 cal sibgle stack grhhhhhhhh sakit ulo ko haha year end project sana

doc nag wa1500 ba si sir taurus?

last nationals kasi ok laru ko sa production.

but didnt enjoy the std div kasi nka 45 ako , kaya naisip ko yun 9mm

quick question are the .45 and 9mm 1911 frames the same? if I get a bare frame can I decide if I want 9 or .45?

yes, frame is the same, slide is diff. i think only the ejector and magazine lang sa lower ang caliber specific

9mm and 40cal meron has ramp cut. if you want to interchange with a different upper, papagawa ka pa ng block to fill the ramp cut for a non ramped .45cal barrel

choi, yup sumali si carlo sa wa1500. DNF siya kasi nasira pistol nya. kaya napilitan gumawa ng SS project!