Important Notice: The site is currently being upgraded to a new software system. This process could take a day or two to complete. During that time, we are going to leave the site up here, on its old software. WHAT GETS POSTED HERE DURING THIS TRANSITION WILL NOT BE COPIED OVER ONTO THE NEW SITE, WHEN THE UPGRADE IS COMPLETE. When we swap over, the content posted while this message is visible will be lost. We wanted to give you folks a place to hang out and talk while we worked though. We will let you know when we are finished. Please pardon the inconvenience, during this transition.

Home Forums Classifieds GT Store Blogs Today's Posts Search Social Groups


Glock Talk
Welcome To The Glock Talk Forums.

21Carrier 21Carrier is offline

Until I Gota 29

Visitor Messages

Showing Visitor Messages 1 to 9 of 9
  1. dpadams6
    03-14-2012 08:07
    I know u have tested a lot of 10mm thrum the glock 20,29. I carry the the 29 for Edc and 20 for home defense. I use the hot underwood 135 and gold dot 165. You mention that you have had better reliability using stock recoil spring and that's what you use for Edc. Have you shot many rounds with the stock rsa and have you noticed any frame battering/damage? Many here use a heavier rsa, but I don't want to do that if reliability is compromised, but don't want to damage the frame either. Appreciate you response.
  2. tln1313
    03-08-2012 16:26
    21 Carrier-

    I've been reading your posts and it's evident you have a ton more experience than me, so I wanted to check in with you on a couple of questions. I carry both a 29 or a 20SF. The 20 is new and I don't want to go changing everything. So my question is this, if I use the light 180 grain inexpensive fmj (underwood, etc) for practice, and then carry the hardcast 200 gr Buffalo bore or DT loads when hunting, fishing, or hiking in the woods, and the 165 JHP DT's for self defense, do I really need to change springs/barrels/guide rods? Most of my shooting is range work, and the heavy/hot stuff seems ok when I shoot it (no bulges, smilies, etc) My experience with changing these components hasn't been overly positive, and I don't want to mess with what seems perfect. But as soon as I read about 'chamber support, spring weight, etc. etc.' I start to think maybe I should start messing with the guns....
    Thanks in advance for your help...
  3. robert91922
    01-17-2012 06:44
    I found an error in this burning rate table:

    Rex 0 burns faster than Rex 1. Somebody mixed up these two in this table.
  4. robert91922
    01-17-2012 06:39

    seems like Graf&Sons have only few 2.2lb cans of Rex0 left. I had this fast gunpowder for my 9mm/124gr range and competition loads. With 4,4gr Rex0/124gr Target plated bullet/ OAL 1.153 I had fair good and cheap ammo, so I can recommend it from my own experience for your range/plinking ammo for your Ruger 9mm.
    Kind regards
    P.S.: If only could I buy few cans of it, but this cheap and good gunpowder won't be available anymore for us reloaders.
  5. 125K9
    09-17-2011 10:37
    21 Carrier, I hope this goes through as I don't know how to work the blame message system. This is Guy Powell (125K9) from Glocktalk, of course, and I've got a quick question please. How is I-20/59 through B'ham these days? I'm from just north of Gadsden, but worked/retired from the Jeff. Co. S.O. in B'ham, however I've not been back home from Texas in 14 years. I'll be coming thru B'ham Thursday evening, or early night, and wonder if I should come on thru town on I-20/59 or take I-459? Would you terribly mind emailing me your advice please? Just use my email address, as it's easier for me. THANKS!!
  6. GTRhino24
    08-18-2011 17:19
    I'm sending you the spreadsheet updated with all the latest chrono/wax data as well as SD added and FPE on all loads. Let me know if you see any errors.

  7. smokeross
    08-05-2011 10:44
    Jeez, your just a young pup I see. I'm looking at your avatar and wondering if that is a pic you took, or had taken. I'm wanting to do something like that at dusk with a pair of Redhawks. Wondering about camera settings.
  8. GTRhino24
    08-05-2011 10:28
    Went to Hoover Tactical to pick up some more SD ammo and a magazine holster. Also picked up some Pow'R Ball in 10mm. Should be interesting dont you think?
  9. GTRhino24
    07-29-2011 06:41
    You shootin' today? If so, text or call me. I loaded about 300rds yesterday.

About Me

  • About 21Carrier
    Hoover, AL


Total Posts
Visitor Messages
General Information
  • Last Activity: 06-18-2013 22:55
  • Join Date: 02-04-2011
  • Referrals: 0


Showing Friends 1 to 10 of 10

All times are GMT -6. The time now is 10:20.